A forum for owners of Yamaha TTR250 trail and enduro bikes!

swannyisnumberone · swannyisnumberone

Hi All. After a provisional "trawl" through the forum looking for a rack - I find that most posts refer to racks fitting the blue bikes. I'm after a rack to for a white bike. Do they have the same fittings? I have just bought a white TTR unseen and it hasnt even arrived at mine yet, but One thing...

boredus · boredus

Hi All, Been getting help in the maintenance forum since the beginning of Jan for this bike so thought it was time to post up a project thread. I was looking for a cheap ( ish) project trails bike that was within spitting distance of Woking so I wouldnt have to travel up and down Britain to fetch bits again....

Markvan · Markvan

Lowered seat gone wrong. Before i totally destroy it im taking it to an upolstery shop. had a test run with a electric carving knife. Think it was under powered or blunt blades. Will post pic when returned from shop. Prob late august. Using an iphone to post pics. Some go upside down. Maybe because im...

TTRfan · TTRfan

I sometimes have side panels that are sound but tatty. I have been looking at various solutions but the simplest and most effective method seems to be to fit decals that pretty much cover the whole panel. Here are the panels cleaned, with any rough spots smoothed down and thoroughly cleaned with clutc...

TTRfan · TTRfan

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=25...

TTpower · TTpower

Hello all, I have begun my Rallye build for the Australian 2012 APC Rally . Ill be using my wifes 1999 TTR 250 for my build along with a rolling 2000 TTR 250 that I have recently acquired. The APC rally runs for 14 days covering a distance of 7100km. Navigation is via GPS. All riders have to ca...

TTRfan · TTRfan

This is, hopefully, going to be a simple restoration of a 2006 TTR to as near new standard condition as I sensibly can. The before pics look better than the the bike originally was when I bought it as I forgot to take pics before power washing it, fitting a legal exhaust, side panels, plus fitting a headli...

JDM_stig · JDM_stig

Well the description says for those with a little too much time on their hands, I thought id tart up a few little bits and give it a good once over after a week or so of use, First up I replaced the rusty tank mount bolts with some shiny stainless. Before After Then I thought Id spray the stand, I went for wrin...

ttr250slw · ttr250slw

today i installed a new sprag clutch and gaskets and an o-ring and a new totally ttr sump plug changing the oil and fitting rubber under the barkbuster handle bar mounts (as they were meant for bigger bars) and fitted a new decompresseor blanking plug. after cleaning the bike down and fitting the bashp...

gregorious77 · gregorious77

So my mate has a white TTR250 which is in need of some TLC. The sprag was slipping so we decided to strip her down to fix it up. When trying to remove the flywheel I noticed the crank bearing had play in it and the flywheel can move up and down a fraction. Once finally removed (pain in the ass) we can see that the...

Marshall · Marshall

Hi, I am new to the TTR as I just bought a 99 TTR-250 Blue enduro a couple months ago im looking into fixing it up. I would like some opinions on what i should look at for replacments, small stuff. The bike works fine for now. First off ill be changing the chain and sprockets, i think ill be going 13/51-52. As f...

wizz · wizz

I want to paint my header black, which high temp paint to use, I have seen youtube using paint on stove paint? on a drz and also spray. Has anyone used either, good results?? things to watch for?? many thanks mark.

Michaelc54 · Michaelc54

Hi, In order to grow old naturally I am in the process of putting a disc front brake onto my XT500 - the existing single leading shoe brake is painfully inadequate I got hold of a pair of forks from a wrecker (who shall remain nameless but not blameless He appears to have supplied either the wrong wheel and...

BM Steve · BM Steve

Hi All My rear brake has been getting worse lately, it locks on the dirt way to easy and on the blacktop as well if your not careful It never used to be like that, the pads have 2-3mm left I removed, cleaned and regreased the brake lever pivot bolt but that didn't help, it is smoother though The piston moves i...

barra8 · barra8

Hello to all you TTR fans out there, I have been doing a little on my bike lately now that i have one again lol. I thought i would do a preview of bulding my 1999 model TTR250LC.This will be just to show how far i have got & what methods i used. It wi...

TDVT · TDVT

I've been seeing some lightweight custom builds out there on the internet & wondered what the engine/trans of our TTRs weighed in at, so I thought I'd ask if anyone knows? I've also wondered about the greater weight of the TTR vs. the YZ or WR seeing as how they have the whole water-cooled system tha...

TTRfan · TTRfan

After Nic's please for pics to show how the TTR goes back together, I thought it might be useful to share some pics of a dead standard bike. I have printed and laminated a couple of these and keep them in the garage to help with rebuilds. I will add more pics as I find them. Brian

Ironhorsend · Ironhorsend

Greetings all, I thought I would post my build as suggested by Jarrah. I picked up a 04 ttr250 from a old farmer up here in ND, USA. It was the first one I've ever seen for sale in this area and thought I'd snap it up. Here's what I started with, minus the seat.

noeyedear · noeyedear

I have owned my blue ttr for a couple of months now. when i got it, it had most things, bash plate long seat bolts, polisport headlight, wider foot pegs disk guard and case saver. have also wolfman enduro tank bag, front fender tool bag and e12 enduro panniers. just ordered a stainless silencer today, wa...

mingle · mingle

hey guys so i plan on upgrading the front brakes, going to put some sintered pads and stainless braided line on. im wondering if there is any rotor upgrades? 280mm -320mm? can i take a oversized rotor kit from a different bike, say maybe a yz or wr and bolt it to my ttr hub? what do you guys think?

TDVT · TDVT

I was just looking at Matteo's (wonder where he's gone?) posts from earlier in the spring about fitting a WR exhaust on his TTR as I came across one myself pretty cheap. Anyway, as I am following the Mikuni thread, etc. the exhaust swap made me wonder if anyone has tried a WR carburetor on a TTR? The stock c...

rollingstone14 · rollingstone14

So my bike might be too loud, I was looking at some slip on baffles, do they work for the bike? What is the genral feeling on slip on baffles?

TTRfan · TTRfan

I seem to spend a lot of time waiting for work to be done by tradesmen which is delaying my other projects so, being a gluton for punishment, I thought I would see what I could do with this Raid: I have the cylinder head and other bits in boxes but there are a few bonuses - kickstart, decompressor (but missin...

spud351 · spud351

So the headlamp on the Raid seems quite rare. I've had melting wires issues with the aftermarket one on mine so looked for a new one. Having taken it off I reconised the plug as the same on my 350LC. Maybe a lot of yams have this plug? So I bought a copy 350lc headlight from Busters for £30. After a bit of demel...

dentaldude · dentaldude

I have a 2001 with a 21" front tire and 18 "rear. it is a TTR250. I found a seller with a ttr125 wheel(front), 17 inch. Any place to see the if the front off the 125 fit my 250?

barra8 · barra8

Hey guys just like to share with yaz all the wiring diagram i have for my ttr (as mentioned above). I was'nt sure where to post it so fingers crossed it aint in the wrong forum?Hopefully it is as usefull to someone as it was for me. Just a bit of appreciation for the help i have been given in the short time i hav...

spud351 · spud351

Anyone tried getting decals for the Raid off Yamaha? Think I'm going to replace the ones missing off my latest Raid if I can. Seriously 90's cheese but what the hell. My other Raid can do without although I did get some copies from Sri Lanka so it may have to be cheesed up as well.

Aidan · Aidan

Well after reading the many restoration story’s on this awesome forum I decided to share my own. My ttr was my first bike and as funds were tight and I needed a relaxing hobby. I decided to buy a cheap bike and try and fix it myself. I spent ages searching various sites and managed to find a 2000 TTR250 in d...

TDVT · TDVT

Went & picked up an '04 TTR last week that I had found on Cragslist here in Vermont. The sale was being handled by the owners in-laws as the bike had to be left behind due to space limitation when the owner moved south. Buying it was a bit of a protracted process as the bike had been stored for about 2 year...

Raggis45 · Raggis45

Am thinking about making some side racks to bolt onto my existing top rack. Anyone got any photos to post that will give me some ideas? Noticed there are some photos in the 'Soft Panniers' thread, but if anyone has any other mods I could look at, I would be grateful. I was thinking of forming/shaping t...

Topic		Started By	Replies	Views	Last Post
	REAR RACK FOR WHITE TTR OE (in the UK) - source or plans WANTED (Preview) Hi All. After a provisional "trawl" through the forum looking for a rack - I find that most posts refer to racks fitting the blue bikes. I'm after a rack to for a white bike. Do they have the same fittings? I have just bought a white TTR unseen and it hasnt even arrived at mine yet, but One thing...	swannyisnumberone	14	1801	Nov 6, 2013 by Dullthud
	Project OE ( 1 2 ) (Preview) Hi All, Been getting help in the maintenance forum since the beginning of Jan for this bike so thought it was time to post up a project thread. I was looking for a cheap ( ish) project trails bike that was within spitting distance of Woking so I wouldnt have to travel up and down Britain to fetch bits again....	boredus	59	4918	Aug 27, 2013 by TTRfan
	Lower seat gone wrong. (Preview) Lowered seat gone wrong. Before i totally destroy it im taking it to an upolstery shop. had a test run with a electric carving knife. Think it was under powered or blunt blades. Will post pic when returned from shop. Prob late august. Using an iphone to post pics. Some go upside down. Maybe because im...	Markvan	11	2375	Aug 18, 2013 by Markvan
	Recovering old side panels (Preview) I sometimes have side panels that are sound but tatty. I have been looking at various solutions but the simplest and most effective method seems to be to fit decals that pretty much cover the whole panel. Here are the panels cleaned, with any rough spots smoothed down and thoroughly cleaned with clutc...	TTRfan	7	2124	Aug 17, 2013 by TTRfan
	Fitting after-market vinyl swing arm "YAMAHA" decals (Preview) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=25...	TTRfan	0	2805	Jul 25, 2013 by TTRfan
	TTR250 Rallye build ( 1 2 ) (Preview) Hello all, I have begun my Rallye build for the Australian 2012 APC Rally . Ill be using my wifes 1999 TTR 250 for my build along with a rolling 2000 TTR 250 that I have recently acquired. The APC rally runs for 14 days covering a distance of 7100km. Navigation is via GPS. All riders have to ca...	TTpower	52	10615	Jul 16, 2013 by TTpower
	Refurbishing a 2006 TTR250 ( 1 2 ) (Preview) This is, hopefully, going to be a simple restoration of a 2006 TTR to as near new standard condition as I sensibly can. The before pics look better than the the bike originally was when I bought it as I forgot to take pics before power washing it, fitting a legal exhaust, side panels, plus fitting a headli...	TTRfan	62	8093	Jul 16, 2013 by TTRfan
	Tarting up the new stead (Preview) Well the description says for those with a little too much time on their hands, I thought id tart up a few little bits and give it a good once over after a week or so of use, First up I replaced the rusty tank mount bolts with some shiny stainless. Before After Then I thought Id spray the stand, I went for wrin...	JDM_stig	2	1741	Jul 3, 2013 by Cubber
	finished! (Preview) today i installed a new sprag clutch and gaskets and an o-ring and a new totally ttr sump plug changing the oil and fitting rubber under the barkbuster handle bar mounts (as they were meant for bigger bars) and fitted a new decompresseor blanking plug. after cleaning the bike down and fitting the bashp...	ttr250slw	4	1070	May 10, 2013 by ttr250slw
	TTR refresh (Preview) So my mate has a white TTR250 which is in need of some TLC. The sprag was slipping so we decided to strip her down to fix it up. When trying to remove the flywheel I noticed the crank bearing had play in it and the flywheel can move up and down a fraction. Once finally removed (pain in the ass) we can see that the...	gregorious77	15	1985	May 1, 2013 by gregorious77
	New 1999 TTR250 owner/Fix up Project (Preview) Hi, I am new to the TTR as I just bought a 99 TTR-250 Blue enduro a couple months ago im looking into fixing it up. I would like some opinions on what i should look at for replacments, small stuff. The bike works fine for now. First off ill be changing the chain and sprockets, i think ill be going 13/51-52. As f...	Marshall	6	2779	Apr 20, 2013 by TT-R250M
	painting header? (Preview) I want to paint my header black, which high temp paint to use, I have seen youtube using paint on stove paint? on a drz and also spray. Has anyone used either, good results?? things to watch for?? many thanks mark.	wizz	7	983	Apr 9, 2013 by wizz
	Identifying Mystery Front Forks.......... (Preview) Hi, In order to grow old naturally I am in the process of putting a disc front brake onto my XT500 - the existing single leading shoe brake is painfully inadequate I got hold of a pair of forks from a wrecker (who shall remain nameless but not blameless He appears to have supplied either the wrong wheel and...	Michaelc54	7	1163	Feb 25, 2013 by Michaelc54
	Rear Brake locks up to easy (Preview) Hi All My rear brake has been getting worse lately, it locks on the dirt way to easy and on the blacktop as well if your not careful It never used to be like that, the pads have 2-3mm left I removed, cleaned and regreased the brake lever pivot bolt but that didn't help, it is smoother though The piston moves i...	BM Steve	4	1275	Feb 10, 2013 by TT-R250M
	2000 model TT-R250M Build 4PX6 ''Rebuild nearly finished'' ( 1 2 3 4 5 ) (Preview) Hello to all you TTR fans out there, I have been doing a little on my bike lately now that i have one again lol. I thought i would do a preview of bulding my 1999 model TTR250LC.This will be just to show how far i have got & what methods i used. It wi...	barra8	202	180309	Feb 4, 2013 by Abbas
	Weight of TTR engine? (Preview) I've been seeing some lightweight custom builds out there on the internet & wondered what the engine/trans of our TTRs weighed in at, so I thought I'd ask if anyone knows? I've also wondered about the greater weight of the TTR vs. the YZ or WR seeing as how they have the whole water-cooled system tha...	TDVT	4	1525	Jan 31, 2013 by TDVT
	How does it all fit together? (Preview) After Nic's please for pics to show how the TTR goes back together, I thought it might be useful to share some pics of a dead standard bike. I have printed and laminated a couple of these and keep them in the garage to help with rebuilds. I will add more pics as I find them. Brian	TTRfan	16	1853	Dec 26, 2012 by barra8
	2004 TTR250S River Bottom Ripper. (Preview) Greetings all, I thought I would post my build as suggested by Jarrah. I picked up a 04 ttr250 from a old farmer up here in ND, USA. It was the first one I've ever seen for sale in this area and thought I'd snap it up. Here's what I started with, minus the seat.	Ironhorsend	16	1539	Dec 20, 2012 by Ironhorsend
	everyones top hot ups and extras (Preview) I have owned my blue ttr for a couple of months now. when i got it, it had most things, bash plate long seat bolts, polisport headlight, wider foot pegs disk guard and case saver. have also wolfman enduro tank bag, front fender tool bag and e12 enduro panniers. just ordered a stainless silencer today, wa...	noeyedear	17	1799	Dec 16, 2012 by BaronGreenback
	Is their any oversized front rotor options out there? (Preview) hey guys so i plan on upgrading the front brakes, going to put some sintered pads and stainless braided line on. im wondering if there is any rotor upgrades? 280mm -320mm? can i take a oversized rotor kit from a different bike, say maybe a yz or wr and bolt it to my ttr hub? what do you guys think?	mingle	34	2805	Dec 4, 2012 by barra8
	WR carb fitment? (Preview) I was just looking at Matteo's (wonder where he's gone?) posts from earlier in the spring about fitting a WR exhaust on his TTR as I came across one myself pretty cheap. Anyway, as I am following the Mikuni thread, etc. the exhaust swap made me wonder if anyone has tried a WR carburetor on a TTR? The stock c...	TDVT	4	1217	Nov 25, 2012 by barra8
	What is the word on baffles? (Preview) So my bike might be too loud, I was looking at some slip on baffles, do they work for the bike? What is the genral feeling on slip on baffles?	rollingstone14	1	626	Nov 23, 2012 by barra8
	1996 Raid in need of a lot of TLC! (Preview) I seem to spend a lot of time waiting for work to be done by tradesmen which is delaying my other projects so, being a gluton for punishment, I thought I would see what I could do with this Raid: I have the cylinder head and other bits in boxes but there are a few bonuses - kickstart, decompressor (but missin...	TTRfan	5	1692	Nov 22, 2012 by barra8
	Raid Headlamp (Preview) So the headlamp on the Raid seems quite rare. I've had melting wires issues with the aftermarket one on mine so looked for a new one. Having taken it off I reconised the plug as the same on my 350LC. Maybe a lot of yams have this plug? So I bought a copy 350lc headlight from Busters for £30. After a bit of demel...	spud351	0	1675	Aug 23, 2012 by spud351
	Interchange parts (Preview) I have a 2001 with a 21" front tire and 18 "rear. it is a TTR250. I found a seller with a ttr125 wheel(front), 17 inch. Any place to see the if the front off the 125 fit my 250?	dentaldude	1	1221	Aug 2, 2012 by barra8
	TTR 250 Ignition Wiring Diagram (Preview) Hey guys just like to share with yaz all the wiring diagram i have for my ttr (as mentioned above). I was'nt sure where to post it so fingers crossed it aint in the wrong forum?Hopefully it is as usefull to someone as it was for me. Just a bit of appreciation for the help i have been given in the short time i hav...	barra8	0	9974	Jul 17, 2012 by barra8
	Raid Decals (Preview) Anyone tried getting decals for the Raid off Yamaha? Think I'm going to replace the ones missing off my latest Raid if I can. Seriously 90's cheese but what the hell. My other Raid can do without although I did get some copies from Sri Lanka so it may have to be cheesed up as well.	spud351	2	1234	Jun 17, 2012 by spud351
	my ttr from bomb to beauty (Preview) Well after reading the many restoration story’s on this awesome forum I decided to share my own. My ttr was my first bike and as funds were tight and I needed a relaxing hobby. I decided to buy a cheap bike and try and fix it myself. I spent ages searching various sites and managed to find a 2000 TTR250 in d...	Aidan	7	3084	Jun 12, 2012 by LRJ
	New bike in the garage (Preview) Went & picked up an '04 TTR last week that I had found on Cragslist here in Vermont. The sale was being handled by the owners in-laws as the bike had to be left behind due to space limitation when the owner moved south. Buying it was a bit of a protracted process as the bike had been stored for about 2 year...	TDVT	0	1182	Jun 6, 2012 by TDVT
	Side racks for soft panniers (Preview) Am thinking about making some side racks to bolt onto my existing top rack. Anyone got any photos to post that will give me some ideas? Noticed there are some photos in the 'Soft Panniers' thread, but if anyone has any other mods I could look at, I would be grateful. I was thinking of forming/shaping t...	Raggis45	0	1001	Jun 6, 2012 by Raggis45
«First < 1 … 5 6 7 8 > Last» \| Page of 8 sorted by