A forum for owners of Yamaha TTR250 trail and enduro bikes!

Jell · Jell

Emptied tank, new gas, new filter. New battery, new plug. Sprayed carburetor starter in carb and bike turns over strong and tries but never starts. Checked carb and it appears clean, but should I soak?

DRZRIDER · DRZRIDER

Just purchased a 2000 TTR 250 and has air box and exhuast "mods". The air box I can repair, the exhuast is empty, as in there is nothing inside the can, and the end cap is just the chrome peice with the 1.5 in. hole. I need to have it USFS approved to ride forest service roads and trails. What was in...

MarkShelley · MarkShelley

I have been given a used unit and the gears are completely seized. I have removed the circlip and tab washer but the gear which slides over the tube will not budge. It is currently bathing in Plus Gas overnight. Amy tips to aid removal? The worm gear that the cable slides into looks like it has a VERY small...

matador · matador

Iain's TTR as developed a clinking sound on the mono shock on rebound only? We checked all the bushes and can feel no movement. It doesn't make a sound when pressing down, only a click on return? Just wondered if anybody else had this problem. Otherwise both bikes running well.

Lumbricus · Lumbricus

Hello, I have just installed the petrol tap/ petc0ck rebuild kit to find that the tap is now incredibly difficult to turn. I can just about move it with my fingers and it's easier with pliers. Should I have used some sort of grease on the new rubber seal I installed? Or will it get a bit easier with use? Th...

nwrider · nwrider

Finally took my 06 ttr to a mechanic, i am going thru just brake light filiments, not running lights. He thinks it could be vibrations of riding at highway speeds. i am sick of changing bulbs every couple of weeks. I am thinking about upgrading to an acerbis xled tailight or the drc moto led inner kit. ...

tim1 · tim1

Hello folks, I came across a yamaha workshop manual recently and noted the main jet size is listed as 137, mine has a 147 and an FMF powercore pipe, does this sound correct as I am diagnosing a dying issue after a short "coshing", starts again easily with a little choke (weak), the pilot scre...

Michael TTR250 · Michael TTR250

Hey guys, I only ride on dirt (no need to take road riding into the decision making process) and run Heavy duty tubes 18-20 psi on trails with lots of sharp broken rocks. Between myself and a mate we have had 4 flats and are looking for a better setup. The options I have come up with seem to be Mousse, Ti...

Goalkeeper · Goalkeeper

Does anybody know if the rear wheel complete with sprocket and brake disc from the older ttr's (purple rim) are compatible with the newer ttr's (2004). Many thanks. Mark.

leigh · leigh

Hey guys, loving this bike and got more questions dropped the front forks 19mm through the triple clamps, has a 50mm lowering link in the back and handles fantastic off road now. and on road up to about 80-90kph. once i go over 90 it seems to get really light in the front end, steering is almost a bit t...

TTRfan · TTRfan

Hi folks I need some advice please. A customer asked for a quote for 4 valve lifters - as Yamaha calls them. I looked up the fiche and it showed two different parts - a blue and a red Anyone know the difference please? Brian

doghouse07 · doghouse07

I have a 2004 TTR 250. Right in front of the head cover there is a hole. When warm there is oil that kinda percolates out and drips on the exhaust and smokes. It looks like there should be a bolt in there, but every part finder I see has the hole but no bolt identified. Can someone please tell me what this...

Flying Dodo · Flying Dodo

Having just rebuilt my TTr top end it all runs but only in neutral , as soon as I put it in gear the engine cuts - it won't restart or even turnover except in neutral - so how should I eliminate the problems to find the source?? I assume it's either a sensor in the gearbox, side stand or clutch switch but wher...

TheWizardofOdds · TheWizardofOdds

A couple of weeks ago I left the bike idling on full choke for a couple of minutes and left it running. I came back to see the battery box smoking. The result was an approximately two inch hole melted on the edge of the cover. I thought that this was down to me leaving the bike on idle too long but now I'm not so s...

mudmonster · mudmonster

Evening all, Just a quick query ref. clutch cables. Does anyone happen to know of a decent replacement cable that not going to cost the same as Yamaha want to charge.......£40 Would a better alternative be to get a universal repair kit and hope the bit fit? Phil

The Drifter · The Drifter

This may be a difficult one as I am not mechanically minded so explaining my problem may be difficult, anyway I went on a ride yesterday when it never stopped raining after about 3 hours my bike started missing and jumping and popping sound at 3 and half hours every time I tried to put power on the bike jus...

Ianto · Ianto

Hi Brian, thanks for the info, I will try to put a photo on here, but I will get in contact with you with my shopping list for the bike, regards Ian.

Ianto · Ianto

Hi, I have a ttr250 and its got a CRD exhaust and it is flipping loud is there any way I can suppress the noise, And the bike has got a CRD bash plate but there is no fixing at the front it is sort of spring loaded is that the way it should be, any help will be appreciated, regards Ian.

TheWizardofOdds · TheWizardofOdds

I took the bike out today for a thrash seeing as the weather is nice but the engine cuts out when I'm in first gear with the bike stationary and the clutch in. Its riding ok and everything's fine when I'm out and about but as soon as I'm down in first gear and at a crossroads or nearly at a stop or whatever the bi...

Irve · Irve

Hi, Lately I've aquired this nice bike for good price. Unfortunatelly a good price usually has some price :). Most of the back frame brackets has been shaved. But making some indicators brackets won't be a hassle, about the rest.. well I will miss them. For the front indicators I have just one bracket a...

Ianus · Ianus

Hey guys and gals, I'm Ian a new member. I have just bought a 2003 TTR250 and already the speedo sender has crapped out( No problem, going to fit a electronic 1). But today it started making a grinding/crunching noise when taking off in 1st gear. I'm guessing it is not the clutch because taking off in 2n...

Archershome · Archershome

Hi all advise if possible over the web? Fitted a new chain and sprocket 14/52 to my lovely TTR I have started to notice quite a bit of noise coming from front sprocket area I think? Under load. Example: cruising at 30mph then slowly wind on throttle get a knock...knock... knock then slowly goes away. alm...

ajsttr · ajsttr

Hi anyone know if there's a certain way of taking the rear pegs off ?. There's some kind of spring washer on them . I tried removing them but they will only turn as far as the peg will allow before it catches the frame. I think they may be seized solid. Thanks

Spunky · Spunky

Hi guys,Finally got a chance to take my ttr out for the first time properly yesterday. Now I realise its only a 250 and its most definitely not built for speed but what sort of speed should I be able to expect from my bike as standard? I realise this is not a simple question but the reason I ask is this, I'm not...

alex w · alex w

Gday, I have a Raid-95 Dark Green 4GY5 and it has started leaking oil out the bottom of the barrel. It looks like the gasket is shagged. I am wanting to know if I can pull the barrel and head off with out removing the motor from the frame. Also does any one know where I can download a workshop manual for it. C...

Barry · Barry

Hello everybody, first post here. I have just bought my first TTR250 with the intention of touring around Australia on it. Having just arrived back in the country, and still being used to european bike prices, I may have gone a little too cheap on the bike I bought. And particularly I think I wasn't obse...

an2006dy · an2006dy

Hiya and good afternoon all!! I seem to have on oil leak coming from a plastic gromit type thingy!! (look on pictures). I'm really stumped as to how to sort this! I must admit i do not have a clue when it comes to mechanics! It is leaking a lot more lately as i can now smell it burning when the engine is runnin...

chrisstdt · chrisstdt

Had the bike out today (did some very tight wet trails through woods weve not done before and it nearly killed me so ive orderd a 52 tooth sprocket !) and when using the strater button it just clicked a few times then started fine ,im pretty sure its going to be the solinoid but is there a check list on hear of...

Matt G · Matt G

Hi, Is this normal? The bike is a 09 model and I have not rode it for 3 months. I just put a new battery in it and everything is fine with the electrics except I can't remember if this is normal and maybe I should be digging a bit deeper. Many thanks, Matt

Spunky · Spunky

The Previous owner of my bike had a bolt on tailpack and it has left some nasty holes in the rear fender, where would I get a replacement to fill the gaps, all the ones I can find on ebay just strap on??? p.s. wish me luck, MOT tomorrow!

Topic		Started By	Replies	Views	Last Post
	Bike fires and tries but won't start (Preview) Emptied tank, new gas, new filter. New battery, new plug. Sprayed carburetor starter in carb and bike turns over strong and tries but never starts. Checked carb and it appears clean, but should I soak?	Jell	9	2639	May 9, 2014 by Jell
	What "WAS" inside the exhaust? (Preview) Just purchased a 2000 TTR 250 and has air box and exhuast "mods". The air box I can repair, the exhuast is empty, as in there is nothing inside the can, and the end cap is just the chrome peice with the 1.5 in. hole. I need to have it USFS approved to ride forest service roads and trails. What was in...	DRZRIDER	11	901	May 8, 2014 by DRZRIDER
	Seized speedo drive (blue bike of course) (Preview) I have been given a used unit and the gears are completely seized. I have removed the circlip and tab washer but the gear which slides over the tube will not budge. It is currently bathing in Plus Gas overnight. Amy tips to aid removal? The worm gear that the cable slides into looks like it has a VERY small...	MarkShelley	4	1016	May 8, 2014 by Pinman
	mono shock - click on rebound? (Preview) Iain's TTR as developed a clinking sound on the mono shock on rebound only? We checked all the bushes and can feel no movement. It doesn't make a sound when pressing down, only a click on return? Just wondered if anybody else had this problem. Otherwise both bikes running well.	matador	2	481	May 8, 2014 by TTRfan
	Petrol tap hard to turn (Preview) Hello, I have just installed the petrol tap/ petc0ck rebuild kit to find that the tap is now incredibly difficult to turn. I can just about move it with my fingers and it's easier with pliers. Should I have used some sort of grease on the new rubber seal I installed? Or will it get a bit easier with use? Th...	Lumbricus	5	605	May 5, 2014 by Lumbricus
	f*&^ng tail light, (Preview) Finally took my 06 ttr to a mechanic, i am going thru just brake light filiments, not running lights. He thinks it could be vibrations of riding at highway speeds. i am sick of changing bulbs every couple of weeks. I am thinking about upgrading to an acerbis xled tailight or the drc moto led inner kit. ...	nwrider	1	501	May 5, 2014 by TT-R250M
	Dies after a short "coshing" (Preview) Hello folks, I came across a yamaha workshop manual recently and noted the main jet size is listed as 137, mine has a 147 and an FMF powercore pipe, does this sound correct as I am diagnosing a dying issue after a short "coshing", starts again easily with a little choke (weak), the pilot scre...	tim1	6	595	May 1, 2014 by tim1
	Some advice needed on Mousse/Tire balls/Ultra Heavy Duty tube (Preview) Hey guys, I only ride on dirt (no need to take road riding into the decision making process) and run Heavy duty tubes 18-20 psi on trails with lots of sharp broken rocks. Between myself and a mate we have had 4 flats and are looking for a better setup. The options I have come up with seem to be Mousse, Ti...	Michael TTR250	19	2793	Apr 29, 2014 by Paul13
	Wheel Compatibility (Preview) Does anybody know if the rear wheel complete with sprocket and brake disc from the older ttr's (purple rim) are compatible with the newer ttr's (2004). Many thanks. Mark.	Goalkeeper	11	1201	Apr 27, 2014 by TT-R250M
	front end twitchy at high speed. (Preview) Hey guys, loving this bike and got more questions dropped the front forks 19mm through the triple clamps, has a 50mm lowering link in the back and handles fantastic off road now. and on road up to about 80-90kph. once i go over 90 it seems to get really light in the front end, steering is almost a bit t...	leigh	31	1917	Apr 24, 2014 by TT-R250M
	Cam buckets or "Valve Lifters" query (Preview) Hi folks I need some advice please. A customer asked for a quote for 4 valve lifters - as Yamaha calls them. I looked up the fiche and it showed two different parts - a blue and a red Anyone know the difference please? Brian	TTRfan	8	821	Apr 16, 2014 by TT-R250M
	Percolating oil??? Someone please help (Preview) I have a 2004 TTR 250. Right in front of the head cover there is a hole. When warm there is oil that kinda percolates out and drips on the exhaust and smokes. It looks like there should be a bolt in there, but every part finder I see has the hole but no bolt identified. Can someone please tell me what this...	doghouse07	4	413	Apr 16, 2014 by doghouse07
	TTR 250 won't run in gear (Preview) Having just rebuilt my TTr top end it all runs but only in neutral , as soon as I put it in gear the engine cuts - it won't restart or even turnover except in neutral - so how should I eliminate the problems to find the source?? I assume it's either a sensor in the gearbox, side stand or clutch switch but wher...	Flying Dodo	7	2001	Apr 14, 2014 by Flying Dodo
	heat protection for battery housing (Preview) A couple of weeks ago I left the bike idling on full choke for a couple of minutes and left it running. I came back to see the battery box smoking. The result was an approximately two inch hole melted on the edge of the cover. I thought that this was down to me leaving the bike on idle too long but now I'm not so s...	TheWizardofOdds	32	1633	Apr 11, 2014 by TheWizardofOdds
	Clutch cable (Preview) Evening all, Just a quick query ref. clutch cables. Does anyone happen to know of a decent replacement cable that not going to cost the same as Yamaha want to charge.......£40 Would a better alternative be to get a universal repair kit and hope the bit fit? Phil	mudmonster	6	528	Apr 11, 2014 by ttboof
	Can Anyone help ??? TTR dying under power. (Preview) This may be a difficult one as I am not mechanically minded so explaining my problem may be difficult, anyway I went on a ride yesterday when it never stopped raining after about 3 hours my bike started missing and jumping and popping sound at 3 and half hours every time I tried to put power on the bike jus...	The Drifter	11	1012	Apr 9, 2014 by The Drifter
	exhaust, bash plate (Preview) Hi Brian, thanks for the info, I will try to put a photo on here, but I will get in contact with you with my shopping list for the bike, regards Ian.	Ianto	2	400	Apr 6, 2014 by Ianto
	loud exhaust (Preview) Hi, I have a ttr250 and its got a CRD exhaust and it is flipping loud is there any way I can suppress the noise, And the bike has got a CRD bash plate but there is no fixing at the front it is sort of spring loaded is that the way it should be, any help will be appreciated, regards Ian.	Ianto	1	596	Apr 5, 2014 by TTRfan
	Engine stalling in first/low speed (Preview) I took the bike out today for a thrash seeing as the weather is nice but the engine cuts out when I'm in first gear with the bike stationary and the clutch in. Its riding ok and everything's fine when I'm out and about but as soon as I'm down in first gear and at a crossroads or nearly at a stop or whatever the bi...	TheWizardofOdds	25	1829	Mar 29, 2014 by TheWizardofOdds
	a "new" bike with some issues (Preview) Hi, Lately I've aquired this nice bike for good price. Unfortunatelly a good price usually has some price :). Most of the back frame brackets has been shaved. But making some indicators brackets won't be a hassle, about the rest.. well I will miss them. For the front indicators I have just one bracket a...	Irve	10	934	Mar 27, 2014 by Irve
	Please help! I think I bought a lemon (Preview) Hey guys and gals, I'm Ian a new member. I have just bought a 2003 TTR250 and already the speedo sender has crapped out( No problem, going to fit a electronic 1). But today it started making a grinding/crunching noise when taking off in 1st gear. I'm guessing it is not the clutch because taking off in 2n...	Ianus	15	861	Mar 27, 2014 by TT-R250M
	Output Shaft Bearing - After New Chain And Sprokets (Preview) Hi all advise if possible over the web? Fitted a new chain and sprocket 14/52 to my lovely TTR I have started to notice quite a bit of noise coming from front sprocket area I think? Under load. Example: cruising at 30mph then slowly wind on throttle get a knock...knock... knock then slowly goes away. alm...	Archershome	3	542	Mar 24, 2014 by TT-R250M
	Rear Footpeg removal (Preview) Hi anyone know if there's a certain way of taking the rear pegs off ?. There's some kind of spring washer on them . I tried removing them but they will only turn as far as the peg will allow before it catches the frame. I think they may be seized solid. Thanks	ajsttr	1	518	Mar 19, 2014 by TTRfan
	A question of power...... I think ? (Preview) Hi guys,Finally got a chance to take my ttr out for the first time properly yesterday. Now I realise its only a 250 and its most definitely not built for speed but what sort of speed should I be able to expect from my bike as standard? I realise this is not a simple question but the reason I ask is this, I'm not...	Spunky	5	630	Mar 13, 2014 by comeragh
	leaking oil (Preview) Gday, I have a Raid-95 Dark Green 4GY5 and it has started leaking oil out the bottom of the barrel. It looks like the gasket is shagged. I am wanting to know if I can pull the barrel and head off with out removing the motor from the frame. Also does any one know where I can download a workshop manual for it. C...	alex w	2	340	Mar 12, 2014 by TTRfan
	Bought a 'cheap' TTR... what to check? (Preview) Hello everybody, first post here. I have just bought my first TTR250 with the intention of touring around Australia on it. Having just arrived back in the country, and still being used to european bike prices, I may have gone a little too cheap on the bike I bought. And particularly I think I wasn't obse...	Barry	6	819	Mar 10, 2014 by ttboof
	Oil Leak!!! (Preview) Hiya and good afternoon all!! I seem to have on oil leak coming from a plastic gromit type thingy!! (look on pictures). I'm really stumped as to how to sort this! I must admit i do not have a clue when it comes to mechanics! It is leaking a lot more lately as i can now smell it burning when the engine is runnin...	an2006dy	8	748	Mar 6, 2014 by an2006dy
	Clicking when tryng to start (Preview) Had the bike out today (did some very tight wet trails through woods weve not done before and it nearly killed me so ive orderd a 52 tooth sprocket !) and when using the strater button it just clicked a few times then started fine ,im pretty sure its going to be the solinoid but is there a check list on hear of...	chrisstdt	4	714	Mar 3, 2014 by chrisstdt
	indicators not in sync with light on dash (Preview) Hi, Is this normal? The bike is a 09 model and I have not rode it for 3 months. I just put a new battery in it and everything is fine with the electrics except I can't remember if this is normal and maybe I should be digging a bit deeper. Many thanks, Matt	Matt G	2	393	Mar 1, 2014 by Matt G
	Bolt on Tail Pack (Preview) The Previous owner of my bike had a bolt on tailpack and it has left some nasty holes in the rear fender, where would I get a replacement to fill the gaps, all the ones I can find on ebay just strap on??? p.s. wish me luck, MOT tomorrow!	Spunky	5	597	Feb 28, 2014 by Terrence R
«First < 1 … 42 43 44 45 46 … 63 > Last» \| Page of 63 sorted by