My friends ride WR 250's and CR 250x's. When we're scooting down a trail and come to a puddle, they can hit the throttle, lift the front, and skate over it without getting soaked. My TTR can't, and I always just have to plow through them. I just dropped down to a 12 tooth sprocket. It does give me more lift in...
Hi All I have now actually started my first Totally TTRs rebuild The bike is a blue 04, it has come to me in a bit of a state It will need everything done to it, including top end rebuild and rear shock overhaul, just to get me started. I had 2 stubborn engine bolts that ended up taking nearly 2 hours to get ou...
Anybody parting out a ttr250? Looking for a good bottom end with trans my big end is bad and bike is beat up not really worth tearing the entire trans apart. Looking to swap the entire case out with the conrod and everything.
Anyone want some cheap pivot pegs these are the old Mk 1 pivot pegs, brand new in original packaging or very good copys these are almost twice as wide and about 15mm longer than the OEM pegs I have a set from my old DRZ wreck I was going to fix up and just held them up to the TTR the other day and they seem to fit w...
See here The spokes on the earlier TTR wheels (usually the purple or gold rimmed ones) can rust quite badly and are difficult to clean up. If yours are really bad or you have a damaged set of spokes then Steve is selling a set of spokes off a 2004 model where the spokes themselves (not the nipples) are stain...
Hey guys i bought a ttr250 :) But it didnt have a carb on it :*( Ive read a bit amd shopped around the oem carb is to rich for me.. so ive turned to the tm33 mikuni. Is there a certain set of cables i should buy along with it? Anyone please help! Thank you!
Couldn't find anything on my problem, I'm sure it's an easy fix but it would be a bit easier if I new where to start. So never having any carby problems I'm a bit lacking on skills in this area the bike starts perfectly but just above idle, I mean as soon as you open the throttle and up to about 10% open there's...
Hey guys I have recently picked up a ttr250 on the cheap and I'm working through its little problems. Biggest one is that it won't start off the motor (grinding). Pretty sure I need a new sprag clutch and I figured a new starter gear as well but looking through the case both the teeth on the motor and the lar...
Hello everyone! I'm about to have my barrel machined out for a +2mm OS wiseco kit. I was just curious if anyone could chime in on reliability thus far? I'll be running the stock liner. I know there are a few posts about this kit but was curious how impressions may or may not have changed? Thanks! -Matt...
Something is worn out in suspension: https://1drv.ms/v/s!Ar9YNbdz-p-sg-0zDVwVuz6eltkYWA I just changed the top bearing. Tomorrow will inspect lower bearings, collars.
Damn - just wrote out an entire 1000 words and lost it as it timed out. Aaaaaargh! Ah well, I shall begin anew. So planning on an oil cooler to a) increase oil capacity and cooling whilst b) being a tight bastard. Most oil cooler kits for bikes are ridiculously expensive. Most I've seen are more than $400...
was copying video to my hard drive & found some from 2013, This video was the last ride for the XR400R, Lesley's last bike ride as we sold both the XT & XR after we got back. This is the slowest I've ridden as I had just hit reserve & grabbed a few ltrs of fuel from the XT to get back to Blinman, it is...
Hi there! i have a ttr 250 open enduro I recently purchased a new loom from totallyttrs as my old one when I checked has melted to the wire. The bike still started and rid before I took it off to buy a new one but ever since I've put my new one on I have no activity the light come on the clocks but theres no nutral...
For sale is my Honda CRF 250 X-RL 2014 Log book in my name I bought from new, only covered less than a 1000 miles Always serviced after every ride Has a speedo, indicators, brake lights,basically out of the box road legal enduro. i have spare brake pads front and rear,the ones are on the bike have loads lef...
Hey guys, I've never changed this stuff and it's long overdue. What size is the nut that holds the front sprocket on? I need to buy a socket that'll fit should i use loctite on the nut or just the screws holding the back sprocket on? Any info would be much appreciated
I am looking for a Pannier Rack to fit a RR. I want to use soft luggage so its really to stop the bags fouling the rear wheel. Would not have a problem adapting one off the shelf. I know make one but lacking man cave!! Would appreciate any pearls of wisdom. Colin4935 -- Edited by colin4935 on Friday 10th of F...
Anyone know of any sticker kits that would fit the acerbis 23lt XR tank? Obviously it won't be a Ttr specific but I was just after something to break up the big slab of white. I like the enjoy mfg kits and realise I could probably cut the tank graphic down to suit somehow but that's a bit of a gamble and not ch...
So what gear ratio are yous running for the road but still ok for easyer trails... the bike has 14/44 "3.1:1" standard.. I useing 14/47 "3.3:1" but is a bit dead into a head wind or long up hill pull.... it is only a 250 may want to much after the 660... might try 13/47 "3.6:1&qu...
hey all, so I had a seized front brake on my 2006 TTR250 both of the caliper pistons are way to gone to save. so I need new set. I have already ordered new seals but I still need the pistons. the allballs kit does not come with pistons. does any brand of aftermarket sell them. Yamaha wants 90 Canadian for the...
I have a problem with a TTR 250.Engine jumps well with choke and runs idle without choke very well.When driving comes no power and the engine jerks.Feels too little gasoline, or misfiring.Who can help me with tips?I would like to sell the TTR, but only if it drives well.Many Thanks !Chris
SummaryChanges to moped and motorcycle training to make sure newly-qualified riders are better prepared for riding on modern roads. Should motorcyclists be able to upgrade their licence to ride larger bikes by taking a training course, instead of having to take more tests ?Give your views by Fri...
On my last ride I noticed when I shifted from first to second my clutch handle would stay held in. 100% sure I'm clicking all the way up to second Clutch cable operates just fine so I think its internal Any ideas? should I be concerned? Thanks
Hi from the often most liveable city Melbourne! Well I finally got around to joining the forum, not because I finally bought a TTR250, I’ve owned mine since June 2003! But I thought I better write up some stuff before it dies (do TTRs ever die?) or before I sell it. Wait, what sell it? Maybe might just have...
Good day all, my name is Alex I am from Ontario canada I started riding dirt bikes on a 2006 TTR250 that was owned by a friend. that was about 10 years ago this past December I purchased the bike off my friend as a back up bike to my 2015 Beta 250rr. my hopes are for my son to upgrade to the TTR from his Honda CRF...
I bought carb on ebay and was cleaning it. While cleaning I noticed there is a hole see pictures. Should it be like this or is it missing some part? I hope not :)
Hi all,just bought an open enduro that i believe was featured on here in the topic "mini restoration"? Anyway i bought it from Stewart from Edinburgh,I've only managed to get out on it twice in the few weeks I've had it but it seems a capable wee bike.
