|
Carb upgrade to a Keihin 36mm PWK
(Preview)
My bike has the original Tekei carb bored out, and with a ported and decked head, high comp 2mm OS piston, GYTR muffler and snorkel removed from airbox. In this configuration it was nice and strong and previously ran 21.5 hp on the dyno. (Up from 17.5hp). Changing just to the Totally TTR's shorty head...
|
Kaos
|
24
|
848
|
|
|
|
Oil cooler
(Preview)
I have a genuine oil cooler that I would like to fit , I have ordered the special blanking bolt and clutch gasket from totally ttrs , I think I need a couple of banjo bolts and I recall there is a link somewhere on this site to fitting an oil cooler , any help would be appreciated, Bob
|
diggermanbob
|
2
|
319
|
|
|
|
New Headlight
(Preview)
My standard Open Enduro headlight was a crap 35w, it got broken last Sunday when i was at Drumclog, stone straight through it, no matter, i had won a Raid headlight bracket the week before on Ebay, I fitted it a few nights ago along with a generic 8" glass headlight, 60/55w, its a huge improvement on ligh...
|
94Garry
|
2
|
933
|
|
|
|
Fitting a genuine Yamaha Reg Plate holder (with light & reflector) for a WR to a TTR...
(Preview)
Ok, so as I mentioned when I joined I recently bought a low mileage TTR250 which had only been used off-road, but the road fittings - indicators, mirrors and plate holder - came with the bike. Anyway I recently went about fitting the road gear, but couldn't work out how to fit the supplied plate holder - i...
|
The Vivinator
|
16
|
412
|
|
|
|
Yamaha GYTR Muffler, can it be made quieter?
(Preview)
Hi All I have the TTR250 with the factory GYTR muffler.. I didn't mind the noise till I bought my son the same bike, however his has the White Brothers E-Series muffler. This is so much quieter. My question is, can the GYTR be made quieter. I use the bike to help muster sheep out Cobar, NSW. Or recomme...
|
Rossyboys
|
1
|
226
|
|
|
|
Raised handlebars
(Preview)
I was looking at installing higher handlebars on my TTR and was comparing different bikes trying to find a suitable one. I can't find these parts new here and I can't get them delivered from outside, especially now that almost nobody is traveling to/from Europe, so this is the only alternative. I foun...
|
PurpleWheels
|
2
|
300
|
|
|
|
An electric TTR250!
(Preview)
I never thought I would be posting something like this but Australian TTR250 owner Gavin Merchant lit up the Facebook "Yamaha TTR250 Riders" group when he posted this photo of his e-TTR alongside his standard bluey! He said: I love my blue 250 but the electric conversion is scary fast.. instant torq...
|
TTRfan
|
7
|
500
|
|
|
|
Anderson Plug
(Preview)
Do any of you guys run an Anderson plug on your bikes directly from the battery? If so where did you mount it? I'm thinking of putting one on my TTR. Reason being to be able to trickle charge the bike with out removing the plastics. Could also plug a mini jump starter pack in it or even a little 12v air compres...
|
rooney
|
6
|
348
|
|
|
|
USB BRACKET.
(Preview)
Hey guys,Thought id share my little modification. I wanted a factory looking USB source. Heres what I come up with. 1 x Aepro CB Guard Mount Aerial Bracket CBBU2 1 x EMGO USB CHARGER W/CLAMP Drilled the top hole with a step drill bit to 28mm to fit the charger. Then drilled the smaller hole with a 6...
|
rooney
|
6
|
301
|
|
|
|
Digital to mechanical speedometer conversion
(Preview)
I want to convert my busted digital speedo to mechanical unfortunately dt125 hardware are not locally available. What I can get is a TW200 head unit and drive gear. I can also get a drive gear for YBR125. If I'm not mistaken the drive gear on the TW200 and YBR125 are on the left side whereas the ttr250 has i...
|
jaobedoza
|
8
|
478
|
|
|
|
Raid side panels.
(Preview)
Hey guys, I'm thinking about making my TTR Raid a Little bit less bulky, can I replace the big Raid side panels with those of the Open Enduro? I thought about taking out the plastic box under the left hand one containing the tool kit, because I always carry the tool kit in my backpack. I live in Dominican R...
|
DominicanTTR
|
3
|
354
|
|
|
|
Best Aftermarket exhaust for TTR250
(Preview)
I just bought a very nice 2002 TTR250 in great shape and I was wondering if an aftermarket pipe would really help, or should I just open up the stock pipe? I don't mind spending a little money if it truly makes a difference, but I don't care about the weight reduction and appearance, etc. I would only wan...
|
JCW
|
16
|
3209
|
|
|
|
Raid racks
(Preview)
http://www.mmotoracks.com/product/whole-welded-luggage-rack-system-for-yamaha-tt-250r-raid
|
mossproof
|
4
|
464
|
|
|
|
Rear shock preload adjusters
(Preview)
Anyone know what size the rear shock preload thread is? I'm considering an XTrig preload adjuster and I don't think they list one for the TTR but if I can find another bike with the same thread I can start the hunt on ebay! (This is just because I'm too idle to strip things down to measure my shock...) https...
|
mossproof
|
9
|
2841
|
|
|
|
Air Filter Cage
(Preview)
Is anyone running one of the Air Filter Cages shown below? They would appear to be less restrictive than the Yamaha original, what are the pro’s and con‘s?
|
IanU
|
2
|
436
|
|
|
|
Tyre test Michelin Anakee Wild
(Preview)
Trying out a new back tyre for a run to Spain plus 5 days of rocky trails. My normal tyre for this has been a Heidenau K60, 130/80 x 18 but it's getting a bit worn out. My lovely knobbly Maxxis IT would be toast after the 1000 miles of 65mph tar plus maybe 400 of track so I'm experimenting with a Michelin Anakee...
|
mossproof
|
7
|
1022
|
|
|
|
TTR 250 exhaust
(Preview)
Can anyone tell me the make of this exhaust
|
een705
|
5
|
868
|
|
|
|
Decals
(Preview)
Done a bit more fettling today, put the tank decals on no problem, left hand side panel all ok, bloody exhaust side more creases than a pair of trousers i’ve slept in after a good night out. Be interested on how to do it, tried starting from the middle and working my way out to the edges, even got the wife’s h...
|
KevinPen7
|
3
|
576
|
|
|
|
Dominator Exhaust
(Preview)
Hi, long time lurker. V. useful forum thanks for all the knowledge! I've been after a replacement for my standard exhaust which had gone past ripe & took a risk on a new Polish dominator exhaust from eBay. I couldn't find any reports on them so I thought I'd offer my initial thoughts. Exhaust arrive...
|
Bran
|
18
|
1345
|
|
|
|
Headlight Upgrade on '93 OE
(Preview)
I thought I'd share my headlight upgrade as it has enabled me to ride safely at night around the dark lanes of Dartmoor and surrounding area. I didn't think to take photos of each step but hopefully this will help anyone who is interested. Everything was sourced from Ebay. I decided that I wanted a round...
|
stringy
|
21
|
754
|
|
|
|
Need to modify my ttr (exhaust and graphics) any tips ?
(Preview)
Hi Friends, Need to modify my ttr (exhaust and graphics) any tips or suggestions are welcome.
|
haan6510
|
1
|
526
|
|
|
|
Power mods
(Preview)
What are the best mods to increase overall power and reduce weight?
|
Sammyboy
|
5
|
657
|
|
|
|
Is this TTR250 or TTR230 front wheel.?
(Preview)
Hi folks. Just need to pick someone's brains. I've bought a wheel from online. It's identical to this. I believe it's from a TTR230 not TTR250. The disc is smaller diameter. Can anyone clarify I really should have checked more before buying
|
Barrelman
|
4
|
508
|
|
|
|
Rejetting for a different exhaust
(Preview)
I'm planning on getting a pro circuit or fmf exhaust, would I have to redo the jetting since I already removed the snorkel?
|
Sammyboy
|
1
|
525
|
|
|
|
Carb boring the Teikei
(Preview)
Has anyone bored out the Teikei on the TTR250? If So, what are your thoughts. I am nearing completion of my 325 build and was considering boring the Teikei so the bottom of the throat is the same as the top
|
OzzyRZ
|
4
|
476
|
|
|
|
Heated grips
(Preview)
Looking to put some on my 350 rebuild, what have others used?
|
ttr steve
|
13
|
577
|
|
|
|
Handlebar risers and brake line
(Preview)
Hello.I ordered some parts including handlebar risers and the longer clutch cable.The only thing i havent found out is if the stock brake line is still ok with the risers.Do i have to route it different?Thanks
|
Spyrious
|
6
|
588
|
|
|
|
After Market Exhaust
(Preview)
What's the best available after market exhaust (new, off the shelf in the UK) for the TTR250, in terms of power gain/noise? My bike has already been 'uncorked' and fitted with a short header, what is the next step? Ian -- Edited by IanU on Friday 28th of June 2019 10:37:15 PM -- Edited by IanU on Saturday...
|
IanU
|
3
|
828
|
|
|
|
Carb issues when uncorcking
(Preview)
Hi, mates; I got my "new" bike, TTR 250 blue / 2003 a few weeks ago. I couldn´t test her as my arm was injuried, but seemed to work nicely (1000 m high area). On the while, I´ve read about how to uncorck her (thanks to all the mates dropping so valueable info !!) When I´ve been able to hold an screwdriver, I st...
|
Indigo
|
3
|
949
|
|
|
|
Weight reduction on my 2003 one
(Preview)
Hi all; A few years has passed since I sold my loved EXC 300 and now back to mud. Quietly, so I got my 03 TTR. Very happy, but my physical condition now is lower. So I wanted to reduce weight on the blue one. I´ve took off a few small parts. Now I´ve replaced silencer. 4,2 Kgr from the original replaced by 2,6...
|
Indigo
|
3
|
656
|
|
