A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Rear shock preload adjusters


Super Guru

Status: Offline
Posts: 1379
Date:
Rear shock preload adjusters
Permalink  
 


Anyone know what size the rear shock preload thread is? I'm considering an XTrig preload adjuster and I don't think they list one for the TTR but if I can find another bike with the same thread I can start the hunt on ebay!

(This is just because I'm too idle to strip things down to measure my shock...)

https://www.dirtbikexpress.co.uk/bike_parts/motocross_suspension/xtrig_preload_adjusters

 

 



-- Edited by mossproof on Saturday 24th of August 2019 08:29:45 PM

__________________


Senior Member

Status: Offline
Posts: 422
Date:
Rear shock
Permalink  
 


Hope you find out as that is a cool bit of kit!

__________________


Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

I got a shock off a bike Simon that I could measure but not exactly sure what you need? Diameter or number of threads per inch or summat like that?



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 1379
Date:
Permalink  
 

Diameter of the threaded bit and thread pitch (suspect either 1mm or 1.5mm) please Brian. Knew I could count on you to have one loose!


__________________


Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

Yep - it's from my stalled 350 project. Got tooooo many projects on the go at the moment no

51.55 diameter and 1.5 thread

Thread diameter.JPG

Thread pitch 1-5.JPG



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 1379
Date:
Permalink  
 

That's brilliant Brian thank you.
Stalled 350 my fault. Kidney stones are the current excuse (machinist's, not mine!) First job next Monday he says...

__________________


Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

mossproof wrote:

Stalled 350 my fault. Kidney stones are the current excuse (machinist's, not mine!) First job next Monday he says...


Not at all - I have so much to do to get the TTR ready for the engine that I am not pushing for it Simon!

It's stalled because I got distracted by other jobs cry

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 2644
Date:
Permalink  
 

mossproof wrote:

That's brilliant Brian thank you.
Stalled 350 my fault. Kidney stones are the current excuse (machinist's, not mine!) First job next Monday he says...


 Ouch

Hope you get that sorted!



__________________

totallyttrs.com

 



Super Guru

Status: Offline
Posts: 1379
Date:
RE: Rear shock preload adjusters
Permalink  
 


Well XTrig have so far been pretty uncommunicative. They do a "universal" 52mm x 1.5mm thread preload adjuster. Currently noone has stock. I was trying to get some dimensions 'cause the gap it has to fit in is pretty tight - takes the place of the preload adjuster locknuts on the rear shock and is surrounded by airbox. The adjuster needs access for a T-bar - I think it might just fit through by the shock reservoir/solenoid area, but like I say, it's tight.

Meanwhile, I went to my local suspension guys and they lent me a Wilbers hydraulic preload adjuster to play with (sale or returnsmile) Apparently most Wilbers shocks are this size. This would work quite well with the adjuster knob mounted on the LHS under the airbox.

P1010976.JPG

Unfortunately, the hydraulic adjuster only has about 10mm of travel. I estimate I need about 12-14mm to get the correct sag for both unloaded day trips and fully loaded trail/camping  trips. Maybe I should just learn to pack lightbiggrin The guy also suggested that the hydraulics are not too reliable in dirty conditions.

Wilbers also do a manual version exactly like the XTrig one but there are none in the country (they normally come fitted to the new shock you buy!) and at £200 more or less, it's a bit rich for me, especially if it won't fit in the gap.

Back to taking the battery box out every time I suppose, for now...



Attachments
__________________


Super Guru

Status: Offline
Posts: 1379
Date:
Permalink  
 

Resurrecting this thread:
I tried contacting xtrig again (in German and English) and had no response. I decided to think of alternatives, and whilst idly searching "52mm thread 1.5mm pitch" on ebay, I found a Renault Clio front spring mount for about 20 quid.

https://www.ebay.co.uk/itm/Renault-Clio-Cup-Racer-Front-Damper-Spring-Seat-Bilstein-M52x1-5-Thread-60mm-Id/183848271078


It sat on my bench for months while I pondered what the hell to do with it...
One day, with the seat off, I took a longer look at the top of the shock (I know - I really should get out more, but you know, covid etc...!) You can see about 1/3 of the circumference of the preload adjusters. I reckon if there was a way of turning them from the top, I could make it work. Because they are 2 different sizes, to make a compact tool which would provide enough torque seemed complicated.
I brought out the Clio top spring mount, drilled equidistant holes in the top face and made up a little gadget that would locate in these holes, which could be turned in either direction (1/3 of turn at a time) using a 1/4"drive ratchet and extension bar to reach.
M6 bolt in the side tightened gently down to lock in place.
Now I just need to be bored enough to pull the shock out and fit my new preload adjuster and give it a try!

 

P1020082.JPG

 

P1020083.JPG



-- Edited by mossproof on Tuesday 8th of September 2020 09:28:25 PM

Attachments
__________________


Senior Member

Status: Offline
Posts: 402
Date:
Permalink  
 

How did you get on Simon?

__________________

Thanks

Daniel Lee



Super Guru

Status: Offline
Posts: 1379
Date:
Permalink  
 

Long story short:
Revs Racing has closed. John Gaskell retired. I now have noone to do my suspension jobs locally. Devastating. Anyway, virtually the last job they did in their workshop was degas my 325 shock, fit a Wilbers HPA and reoil and gas the whole lot. I just arrived at the right time to catch them dumping loads of stuff in the skip!!! Still charged me for it though!
My manual adjuster would work, with a thin spacer/thrust washer, but I realised I had to remove the remote reservoir hose to fit it so I never got round to it, then when the Revs closure struck, I took the snap decision to go posh.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard