A forum for owners of Yamaha TTR250 trail and enduro bikes!

davecambo · davecambo

Wondering if anyone has noticed better milage with different fuels. Here in australia we have 91, 95 and 98 fuel but they all react differently. On my ducati 98 gives awesome power but i actually get better milage from the 95. I wonder if the 98 ive been running in the trr is doing the same. Anyone compar...

sammyttr · sammyttr

Hello, Just wondering where the oil filter is placed on the later ttrs and is it easily accesable.

dan-reeves · dan-reeves

Hello I removed my seat today and found a whole lot of mess, the bottom of the air filter housing was just thick sludge and the tube that drains all the excess water was block solid I have included a photo of the top of the housing which doesn't look right (like something has been removed) I think its like...

davecambo · davecambo

as probably the cheapest option for lowering by about an inch, how exactly would one shave the seat, and would it be possible to do it and retain the original cover, or is that buggered onced ripped off. oh yeah, i mean doing it ones self, obviously i could take it to a motor trimmors but then it wouldnt be t...

davecambo · davecambo

http://www.ebay.com/itm/Derestrict-CDI-YAMAHA-TTR250-4GY-Ignitor-Ignition-/280698833419?pt=LH_DefaultDomain_100&vxp=mtr&hash=item415af44a0b

davecambo · davecambo

http://www.torpedo7.com.au/products/EKCHON0C1/title/ek-chain-520sro-o-ring-chain

davecambo · davecambo

is it normal for fuel to drain out of the tube that leads to what looks like the float bowl when you tip the bike to the left about 45 degrees. i was lubing my chain and had the bike leaned over to make it easier to turn the rear wheel and noticed fuel leaking out.

shack · shack

Hi all, I'm after printing a couple of pages from the downloaded owners manual, but it says it is password protected, anyone shed some light on this? don't think the wife would be impressed if the laptop dissappeared into the garage for an oil change just being lazy and trying to safe myself having to w...

davecambo · davecambo

i am buying a new socket set, and would like to know the largest nut that is on a TTR so i can get a set that will service my bike without having to go parts shopping half way through something. also if the nut is metric or not would be great too. cheers.

davecambo · davecambo

Do you think you would notice a change from 47 to 48 rear sprocket? Just took the bike for a test ride with the 13:47 setup and she went well and still does over 110 km/h. Gearing commander says not much difference in top speed with a change to 48, but would there be a noticeable difference in down low resp...

BM Steve · BM Steve

The manual says to use a 520V2 but the chain below I was wanting to buy It's called a D.I.D 520VT2 T-Ring Chain Link Does anyone know if it's suitable ?? It's on super special this week Thanks Steve

pedrosan · pedrosan

Hi guys, Hope you had a good Christmas. I have been commuting through the snow over a moorland track on my TTR250 ('94 Raid), having a few slips trips and falls on the ice but never being let down by the bike yet. I recently changed my Sprag with parts I sourced from Partshark in America, I did it because I...

davecambo · davecambo

quick question, when riveting master links with a rivet tool (one i just ordered from America) how much do you rivet each pin? as in how wide should the rivet be after being pressed to confidently stop the link from failing. cant find anything on the net. would a mm increase in diameter be enough or too mu...

davecambo · davecambo

can i get some figures on what you guys are getting out of a tank please? those of you with blue, 10L tanks only. doesnt matter what mods you have, the more the merrier, i can just average it all out at the end.

davecambo · davecambo

how big a sprocket can you go on the back before you have to alter/lower the chain guide (if thats what it is called) on the bottom of the swingarm at the back that the chain runs through? im thinking about running 14:50 or 52 setup.

davecambo · davecambo

hi all, i just finished putting on the 47 tooth rear sprocket. already had a 13 on the front. took her for a spin round the block and initialy thought that it may be too short in 1st gear. Any thoughts? reason i put the 47 on was too high top speed. wanted to reduce it a bit and gain more response down low. would...

shack · shack

Hi all, just doing an oil change and found the large 'o' ring around the filter housing has snapped, but can I find a replacement?, the two smaller ones have seen better days as well, but might be able to get these a little easier. Where have (has anyone) people go replacement ones from? or it is worth just...

fatboy686 · fatboy686

Hello all, My newly acquired TTR will be going in for an MoT test next week, but I have one question. The original number plate assembly (regular size plate, reflecter, number plate light) has been replaced by a slightly smaller number plate, with no number plate light and no reflector (it has a red...

davecambo · davecambo

mate any chance of posting a pic of the difference between your great looking footpegs and the standard ones. how much would these be shipped to Australia too mate? cheers!

dan-reeves · dan-reeves

Hello i purchased a fmf silencer for my bike and fitted it on, there dosent seem to be an increase in power, (just louder) was just wondering if anyone has fitted this exhaust and had to re jet it? Also if the exhaust will do any damage to the engine will different back pressure? (was thinking of putting t...

DC · DC

Hi folks. Hosed down after a ride a few weeks ago, put the bike away. Today, no start on the button or kick. Turn over but no fire. I have power, checked the spark, checked fuel is flowing, drained fuel from carb, checked airbox is dry. Removed tank to get at all the electrical connections. Gave them a...

tonyh210367 · tonyh210367

Hi I'm in need of a bashplate and have access to some good fabrication facilities at work. Would any of you be so kind as to take a photo / produce a quick sketch with the key dimensions so I can get one fabricated. I could of course take some measurements myself but thought it better to use a trusted design :...

davecambo · davecambo

hi there again. I have pulled my sparkplug and taken a picture of it. what do you think? it has both black and white parts. just trying to work out if its rich or lean. And while i have you looking, this rubber thing was sitting on top of the engine next to where the spark plug goes. what the hell is it and where...

davecambo · davecambo

hey guys, i got to 200km and changed the oil on my new 2011 TTR. it was very black. i then put spare full synthetic oil i use in my ducati 1100 in the TTR, but have since remembered that this may not be recommended for a new bike like my TTR as it hasnt finished breaking in. I read this is because of glazing in the...

barto · barto

hi any feed back would great i have a ttr 250 06 it has been riden hard 3 day bike rides through country sides still running fine ..very reliable great bike but i have found scrape marks on the clutch housing also it make a metal spinnig noies under duress and also when changeing gear any imfo would be gr...

davecambo · davecambo

i am running 13 front and tomorrow changing to a 47 rear sprocket instead of the 44. will i need new chain?

davecambo · davecambo

after being paid a little more than usual, i now have a budget for a better or more expensive exhaust. staintunes are very good australian built exhausts and for 640 Australian dollars it could be the one i buy. just wondering if any aussies have put one on a blue ttr, even better a late model blue one like...

davecambo · davecambo

can i use castrol race edge oil that i have heaps of at home, or do i have to use yamalube?

tonyh210367 · tonyh210367

Hi All Just a general query to see if anyones aware of any other throttle or clutch cables that fit the TTR. Cheers, Tony

davecambo · davecambo

i think this has been asked already but are there any differences between the 2006 TTR and the 2011 TTR exhaust wise. I have made up my mind and am buying a FMF exhaust, but the company only lists them for models up to 2006. I think this is due to Aus and NZ being the only countries to keep producing them? Obvi...

Topic		Started By	Replies	Views	Last Post
	Fuel (Preview) Wondering if anyone has noticed better milage with different fuels. Here in australia we have 91, 95 and 98 fuel but they all react differently. On my ducati 98 gives awesome power but i actually get better milage from the 95. I wonder if the 98 ive been running in the trr is doing the same. Anyone compar...	davecambo	3	1050	Feb 23, 2012 by davecambo
	Engine Oil for the air filter- just checking (Preview) Hello, Just wondering where the oil filter is placed on the later ttrs and is it easily accesable.	sammyttr	38	12428	Feb 22, 2012 by sammyttr
	Air filter/housing (Preview) Hello I removed my seat today and found a whole lot of mess, the bottom of the air filter housing was just thick sludge and the tube that drains all the excess water was block solid I have included a photo of the top of the housing which doesn't look right (like something has been removed) I think its like...	dan-reeves	11	2370	Feb 22, 2012 by dan-reeves
	shaving the seat (Preview) as probably the cheapest option for lowering by about an inch, how exactly would one shave the seat, and would it be possible to do it and retain the original cover, or is that buggered onced ripped off. oh yeah, i mean doing it ones self, obviously i could take it to a motor trimmors but then it wouldnt be t...	davecambo	3	888	Feb 20, 2012 by davecambo
	what is this? (Preview) http://www.ebay.com/itm/Derestrict-CDI-YAMAHA-TTR250-4GY-Ignitor-Ignition-/280698833419?pt=LH_DefaultDomain_100&vxp=mtr&hash=item415af44a0b	davecambo	3	965	Feb 19, 2012 by Cubber
	nice deal on a chain (Preview) http://www.torpedo7.com.au/products/EKCHON0C1/title/ek-chain-520sro-o-ring-chain	davecambo	0	711	Feb 16, 2012 by davecambo
	fuel leaking when bike tipped over 45 degrees (Preview) is it normal for fuel to drain out of the tube that leads to what looks like the float bowl when you tip the bike to the left about 45 degrees. i was lubing my chain and had the bike leaned over to make it easier to turn the rear wheel and noticed fuel leaking out.	davecambo	2	837	Feb 16, 2012 by davecambo
	Printing from the owners manual (Preview) Hi all, I'm after printing a couple of pages from the downloaded owners manual, but it says it is password protected, anyone shed some light on this? don't think the wife would be impressed if the laptop dissappeared into the garage for an oil change just being lazy and trying to safe myself having to w...	shack	1	889	Feb 16, 2012 by Cubber
	largest nut on TTR (Preview) i am buying a new socket set, and would like to know the largest nut that is on a TTR so i can get a set that will service my bike without having to go parts shopping half way through something. also if the nut is metric or not would be great too. cheers.	davecambo	8	1246	Feb 15, 2012 by davecambo
	47 to 48 rear (Preview) Do you think you would notice a change from 47 to 48 rear sprocket? Just took the bike for a test ride with the 13:47 setup and she went well and still does over 110 km/h. Gearing commander says not much difference in top speed with a change to 48, but would there be a noticeable difference in down low resp...	davecambo	0	617	Feb 14, 2012 by davecambo
	What Type Of Chain (Preview) The manual says to use a 520V2 but the chain below I was wanting to buy It's called a D.I.D 520VT2 T-Ring Chain Link Does anyone know if it's suitable ?? It's on super special this week Thanks Steve	BM Steve	11	1616	Feb 14, 2012 by davecambo
	Sprag and Gaskets (Preview) Hi guys, Hope you had a good Christmas. I have been commuting through the snow over a moorland track on my TTR250 ('94 Raid), having a few slips trips and falls on the ice but never being let down by the bike yet. I recently changed my Sprag with parts I sourced from Partshark in America, I did it because I...	pedrosan	10	1533	Feb 14, 2012 by pedrosan
	riveting chain master links (Preview) quick question, when riveting master links with a rivet tool (one i just ordered from America) how much do you rivet each pin? as in how wide should the rivet be after being pressed to confidently stop the link from failing. cant find anything on the net. would a mm increase in diameter be enough or too mu...	davecambo	1	739	Feb 13, 2012 by Cubber
	milage (Preview) can i get some figures on what you guys are getting out of a tank please? those of you with blue, 10L tanks only. doesnt matter what mods you have, the more the merrier, i can just average it all out at the end.	davecambo	4	1230	Feb 12, 2012 by Cubber
	how big can you go on the back (Preview) how big a sprocket can you go on the back before you have to alter/lower the chain guide (if thats what it is called) on the bottom of the swingarm at the back that the chain runs through? im thinking about running 14:50 or 52 setup.	davecambo	0	671	Feb 11, 2012 by davecambo
	13:47 too short? (Preview) hi all, i just finished putting on the 47 tooth rear sprocket. already had a 13 on the front. took her for a spin round the block and initialy thought that it may be too short in 1st gear. Any thoughts? reason i put the 47 on was too high top speed. wanted to reduce it a bit and gain more response down low. would...	davecambo	0	833	Feb 11, 2012 by davecambo
	sourcing rubber o rings (Preview) Hi all, just doing an oil change and found the large 'o' ring around the filter housing has snapped, but can I find a replacement?, the two smaller ones have seen better days as well, but might be able to get these a little easier. Where have (has anyone) people go replacement ones from? or it is worth just...	shack	5	2141	Feb 10, 2012 by shack
	Quick MoT test question .... (Preview) Hello all, My newly acquired TTR will be going in for an MoT test next week, but I have one question. The original number plate assembly (regular size plate, reflecter, number plate light) has been replaced by a slightly smaller number plate, with no number plate light and no reflector (it has a red...	fatboy686	4	661	Feb 9, 2012 by fatboy686
	another one for TTR fan (Preview) mate any chance of posting a pic of the difference between your great looking footpegs and the standard ones. how much would these be shipped to Australia too mate? cheers!	davecambo	2	568	Feb 9, 2012 by Cubber
	FMF powercore 4 exhaust (Preview) Hello i purchased a fmf silencer for my bike and fitted it on, there dosent seem to be an increase in power, (just louder) was just wondering if anyone has fitted this exhaust and had to re jet it? Also if the exhaust will do any damage to the engine will different back pressure? (was thinking of putting t...	dan-reeves	5	1948	Feb 9, 2012 by davecambo
	Won't start after a hose down.. (Preview) Hi folks. Hosed down after a ride a few weeks ago, put the bike away. Today, no start on the button or kick. Turn over but no fire. I have power, checked the spark, checked fuel is flowing, drained fuel from carb, checked airbox is dry. Removed tank to get at all the electrical connections. Gave them a...	DC	14	1819	Feb 9, 2012 by TTRfan
	Bashplate Dims Required Please (Preview) Hi I'm in need of a bashplate and have access to some good fabrication facilities at work. Would any of you be so kind as to take a photo / produce a quick sketch with the key dimensions so I can get one fabricated. I could of course take some measurements myself but thought it better to use a trusted design :...	tonyh210367	0	655	Feb 6, 2012 by tonyh210367
	take a look at this please (Preview) hi there again. I have pulled my sparkplug and taken a picture of it. what do you think? it has both black and white parts. just trying to work out if its rich or lean. And while i have you looking, this rubber thing was sitting on top of the engine next to where the spark plug goes. what the hell is it and where...	davecambo	3	780	Feb 5, 2012 by davecambo
	break in oil (Preview) hey guys, i got to 200km and changed the oil on my new 2011 TTR. it was very black. i then put spare full synthetic oil i use in my ducati 1100 in the TTR, but have since remembered that this may not be recommended for a new bike like my TTR as it hasnt finished breaking in. I read this is because of glazing in the...	davecambo	2	1228	Feb 4, 2012 by davecambo
	clutch houesing has scrape marks on outer edge (Preview) hi any feed back would great i have a ttr 250 06 it has been riden hard 3 day bike rides through country sides still running fine ..very reliable great bike but i have found scrape marks on the clutch housing also it make a metal spinnig noies under duress and also when changeing gear any imfo would be gr...	barto	2	1062	Feb 4, 2012 by barto
	will adding a 47 tooth rear sprocket need bigger chain (Preview) i am running 13 front and tomorrow changing to a 47 rear sprocket instead of the 44. will i need new chain?	davecambo	3	1442	Feb 3, 2012 by davecambo
	staintune (Preview) after being paid a little more than usual, i now have a budget for a better or more expensive exhaust. staintunes are very good australian built exhausts and for 640 Australian dollars it could be the one i buy. just wondering if any aussies have put one on a blue ttr, even better a late model blue one like...	davecambo	3	1086	Feb 3, 2012 by davecambo
	can i use castrol? (Preview) can i use castrol race edge oil that i have heaps of at home, or do i have to use yamalube?	davecambo	1	1569	Feb 2, 2012 by Cubber
	Clutch and Throttle Cables - Any other models fit? (Preview) Hi All Just a general query to see if anyones aware of any other throttle or clutch cables that fit the TTR. Cheers, Tony	tonyh210367	1	641	Feb 1, 2012 by Cubber
	is a 2006 the same as a 2011 (Preview) i think this has been asked already but are there any differences between the 2006 TTR and the 2011 TTR exhaust wise. I have made up my mind and am buying a FMF exhaust, but the company only lists them for models up to 2006. I think this is due to Aus and NZ being the only countries to keep producing them? Obvi...	davecambo	2	686	Jan 31, 2012 by davecambo
«First < 1 … 57 58 59 60 61 … 63 > Last» \| Page of 63 sorted by