I picked my engine stand up from the powder coaters today and it's looking good. Made from a redundant frame and some box profile it will make working on engines out of the frame a lot easier Just need a couple of lengths of rod to slot in to the engine bolt locations to hold the engine and I will be away!
After an afternoon visit to Mr TTR I have obtained a present for my TTR. The gearbox sprocket currently on my bike (13 teeth) has finally succombed to "hookitis" and is nearing its limit of usefulness. I didn't want it replaced with a similar sized sprocket since I'm always advocating that...
I was given a brand new Western Power Sports chain today and i was wondering if it will fit my 2000 Yammy TTR250. Factory size is a 520V2-110 and the chain i was given is a 520H-114 will it fit if i remove 4 links? i dont know if this will help but the new chain is part number 69-5114G WPS brand. -- Edited by TTR-...
Hi chaps, Is anyone familiar with brazing fuel tanks? I'm going to attempt this on my OE tank, as I wanted something a little more permanent than an adhesive filler. Apart from the obvious 'make sure there is no explosive residue' are there any important steps to follow? I didn't want to weld the tank at...
I have a 1993 TTR250 OE, has all the normal things done but i would like a bit more noise as i ride mainly in traffic at the moment.
Is there any information on baffle modification in the standard muffler, to get a bit more thump out of the old beast.
Pretty much all of the powder coat has chipped off my outer engine casings, and was wondering if this could be a symptom of something more serious, like overheating or fatigue? If I cleaned and polished up the alloy would it be durable enough for the vigors of offroading, or am I going to need to paint/po...
white open enduro model, just had top end rebuilt, new rear disc/pads, mot until end of july next year, taxed until end of this month, starts first time and runs well, on ebay for £850, item number 200832322256, will sell for £800 to anyone who uses this board.
Hello fellow TTR riders, I am having trouble with acquiring a ''new'' side gaurd for my blue 1999 TTR-250LC (blue gaurds) Any model from 1999-20012 will be right but i cannot seem to find anywhere to buy it I have acquired all my other OEM parts from www.power...
i am trying to time up my ttr after fitting new exhaust valves, i am not sure which mark on the flywheel is tdc, there are 2 marks, one is a single line and the other a double line, the workshop manual i have says turn the engine clockwise until you see the mark, do they mean clockwise if you are looking at the l...
White TTr 250 (Gold Wheels) 4GY model, Imported in 2000. I've had the bike since 2002, used for green lanes and back road ride outs. It's been stood since 2006 after buying a project house and it doesn't look like I'll get the chance to use it any time soon so it's up for sale. It's in average condition, wit...
Miserable weather in Devon (UK) today and guess who was out riding in it! It was the monthly Devon TRF Group meeting at the Dolphin pub in Bovey Tracey this evening. Occasionally one of the members, Roger, organises trail rides starting at the Dolphin. Roger (KTM250EXC) invited me along to today’s ru...
Just thought I'd share this with the good people of the forum. It gave me a giggle. My mate decided that he wanted to learn how to weld. Being the genius he is thought he could just buy a welder and that's it, he can weld. After getting his new welder home he was unable to get it to work. He phoned the guy he boug...
Since I've ditched the idea of a restoration in favour of a custom job, it's time to sacrifice the digi clock to the TTR gods. Digital speedo clock - fully working and cosmetically very good. Open to offers, although a swap for other parts would be preferred. (I'm prepared to send first via recorded pos...
As the title suggests...i'm looking for a chain guard...the bottom part of mine is damaged and causing a 'rub' on the tyre wall...noisy and rather annoying! Many thanks in advance..
Hi all, Anyone know whether the 95 Australian model had electric start or just kick? Are the kickstarters known for shaft breaks? is it easy to fit electric starter kit and where from? Mike
Hello all, Just thought i would share some of the free anti-virus & link scanner programs available to people. I have tried many different programs in the past but none that come close to this combination for browser speed & protection against virus & malware a...
hi am brand new to the site am looking to buy a ttr had a k plate before so i know how good they are please get in touch with what you have pics would be brill thanks in advance dave
4 of us (myself, brother Trev - TTR250, Olly Cooke - WR250R and Rik Lennard - KTM250 4T) took advantage of a gap in the rain for a trail ride and I am very very glad we went out. Great weather and the lanes absolutely tip top - the roads and lanes between Tedburn and Winkleigh were running with water It seem...
Hi all I have a blue 02. It won't start on the kick starter. It will return when I kick it & I can hear whirling inside but there is no great resistance when I kick. Is it engaging? Is it slipping? How does it work? Where should I look for further info? (I've had a look at the FAQ but that's for installing a k...
Last time I was out of my TTr (last year I am afraid to admit) I was being followed by a guy who used to work for Geraint Jones and at the UK Yamaha Off Road School. He observed that that my control would improve with a firmer front end. He said that at the Yam School they had some discs of 10mm thickness machi...
Well went out on the weekend with a few mates and they sorted of mentioned that their bike is more set-up for off road. Now I know I have experience and I noticed the semi tyres I had wern't off road friendly. But after falling off like every five minutes and trailing behind while my mates had to stop a...
Up for sale is my 2005 55 plate tt250r. Not and taxed until June 2013. Resently I have replaced the sprag clutch ( just as a precaution ) fitted new Avon distanzia tyres and new o ring chain and sprockets. As you can see the bike is in great condition. £1700
I also have a kouba lowering link and front and re...
I'm in Victoria, Australia. I’ve got a 2007 TTR250 that I bought second hand and I’ve had since late 2010. I bought it specifically to pursue my (humble) rallye racing dreams and competed in the 2011 Condo 750 on it. Since then I’ve only used it sporadically, for trailriding and non-competitive ralli...
While we are on the subject of decals I will be needing a decal set for my bike as in the picture below if anyone can recommend anywhere to have them made up or buy them. The colour scheme is slightly different to the more common purple ttr's which decals can be found on eBay but they don't do them in the colou...
