A forum for owners of Yamaha TTR250 trail and enduro bikes!

Gary · Gary

Im going to use my TTR for some long distance trials what gearing would be suitable I'm thinking 14 52 ?

BM Steve · BM Steve

Greeting All So I fitted my 13/52 gearing today and had a bit of a ride down the back firetrail this combo seems to work really well, I can go down to almost stopped, and move so slowly in first gear that it doesn't even register on the speedo I normally have my Idle set so the motor is just above stopping so yo...

Bigbadbenno · Bigbadbenno

hi guys, I am new here so forgive me if I go over old ground/ issues. I have an 09 ttr250, it has a gear combo of 13/40. I have read a few threads on here n it seems as tho its a very high ratio. I use my bike as a commuter, and have a second set of wheels for dirt play. mainly easy stuff with a bit of climbing as well. m...

Moo · Moo

Trying to swap out the kouba lowering link for the original length. I've taken the plastic caps off the swing arm to remove the 17mm bolts and sleeve. Trouble is, the bolt and sleeve just spin around. I can see the sleeve has two flat edges, but obviously whatever surface was holding is still has been kna...

Tommy the cat · Tommy the cat

I have just fitted a new chain and front and rear sprockets and was wondering if any of you kind peeps can tell me the appropriate torque settings?? (metal tank 98 If memory serves my right) Ive got the manual here very kindly supplied by Brian but I canny find the darn info....I might have to see if I can ge...

ttr steve · ttr steve

Hi Everyone I had a bit of a problem............... Fitted a new mt43 on my bike, the gearing was 13/50 which I quite liked, not to much loss on the road and very good in the lanes. Well I could not get the 520 chain tight enough unless it was on the very last setting on the snail, so no room for tightening when...

admbnm · admbnm

good evening,im still finding my way around my ttr and maybe someone can help with this.my 96 oe has 15/44 sprockets fitted and i have had it clocked at 30mph,mine was showing 43kmh,does this mean that 60 mph =86kmh shown?,also whilst i'm here any info for the correct chainset sizes for my year as it's...

zzrdd · zzrdd

Could someone advise the overall length of the rear wheel bearing spacer that the axle goes through? Mine is missing and I thought I'd just make a new one. Thanks, Rick Colorado Springs, CO

dogwheel · dogwheel

Fed up with the chain rattling against the Case Saver, but not wanting to lose that bit of protection: I changed from 14/50(3.57:1) to 13/46(3.53:1), there's no noticeable difference in the overall ratio, the bike rides just the same, but, thankfully, the rattle has gone. Incidentally, 14/50 need...

Markvan · Markvan

i was ridding on the road luckily only about 30kph and the chain joiner broke or unclipped itself. I couldnt find all the pieces so had to call blossum to pick me up with the trailer. Problem being she couldnt hook up the trailer so it was a double trip In the car. The chain wasnt that loose , only with a sligh...

leigh · leigh

Hey everyone, I've got 13/48 gearing on my bike. I've just bought a second set of rims to run my 50/50 tyres on and thought I might go a 46 rear sprocket. Anyone know if the chain set for 13/48 will still fit with a rear 46. Chain adjusters are on 8.2 currently. Can't remember how many links. I'm prett...

petenz · petenz

just ordering some diffrent gearing... thought i would post the JT sprocket catalogue for the TTR250 HERE ====> http://www.jtsprockets.com/catalogue/model/2738 -- Edited by petenz on Friday 12th of June 2015 10:28:24 PM

badmad · badmad

TTR-Tony · TTR-Tony

just installed a new chain and drive sprocket on my 2000 TTR250, i adjusted the chain as per the manual with it up in the air on a stand so the front and rear tires hang free and the adjusted the slack to about 1.65 inches up down movement, set the bike down and ride around and it just seems like it has a t...

Markvan · Markvan

Just checking so i get the right chain size. RK have a 520 size oring chain and the shop says it will fit My auzzy 2004 model. Reason why im double checking as had problems getting the right joiner link. Got two 520s from the shop and neither fitted. Mines a 520 V2 both i got were to short to go through for th...

j180 · j180

When I changed the gearing on my old Fireblade the speedo stopped being accurate, will a change of the front sprocket do the same on the OE, I thought I read someone mention this somewhere. Will be contacting Brian once the salt has gone from the roads regards new chain and sprockets but need to make sure...

TTRHead · TTRHead

Hello everyone my TTR has currently a 13/44 set up which I dont like. It feels far to tall and I don't seem to have a lot of low down power? i was thinking of going 14/50? Would this give me more low down drive?

davecambo · davecambo

Manual says engine oil, some people also say use engine oil. Personally i find this very hard to do without messing everything up. What do you guys recommend? -- Edited by davecambo on Monday 13th of February 2012 09:50:10 AM

widge · widge

but not got a clue as to what to get. Upon giving the chain a good clean I found some of the links have seized. I am pretty sure i have the standard set. I use the bike for commuting and for green lanes. Around Surrey it is fairly hilly. but I do not know. what is the standard sprockets and chain?

Padowan · Padowan

I know there's been a few threads on chain/sprocket combinations, but I though I'd start a thread from my experiences that gives a few sprocket, links, tyre and adjuster combinations and what sort of clearances they give at correct chain tension. Maybe this can build up over time into a referenc...

mypobox · mypobox

Notice the one link has a flat pin, like it was grinded down. This is not the master link, there is another one just like it, so there are atleast two pins like this. The chain feels and looks completely fine in every other aspect. thank you

TTRHead · TTRHead

Anyone know where I can get one for my 04 ttr

Markvan · Markvan

Its only been on 3500km with all road riding although i did do 500 km on the beach mostly hard sand. Kept the chain lubed as much as i could in between rides. I did notice a clicking sound as i accelerated slowly in 1st 2nd and 3rd. But when i coasted it was quiet. The 14 tooth. Standard yamaha sprocket is bac...

petenz · petenz

Dose a 15T engine sprocket fit inside the de-railer plate on the motor ? looks like theres enough room... Is there ?

Rger8 · Rger8

I just got my new used 2003 TTR 250 and had it out in the dirt. Overall the gearing seemd pretty good but I was wondering what it would be like with a 12 tooth up front. I have the stock gearing which I think is 13/52 or so it says in my owners manual. I am really only going to use it on the trails. Any feedback app...

Harleyquin · Harleyquin

http://ttr250.activeboard.com/t48120247/sprocket-question/)

Harleyquin · Harleyquin

Hi I've posted here about the sprockets on my 1994 Raid (4GY4 with 18/57T and 428 chain). I'm now contemplating changing the sprockets and chain to 520 but I seem to remember reading a post that said that the 520 chain would foul the digital sensor at the front sprocket. Now I can't find that post - can a...

Terrence R · Terrence R

I went on a big ebay bender and order a chain and sprocket kit. I don't nessacerly need the new chain, but I sure don't mind having a spare. The sprockets are 13t front and 46t rear. I'm mostly doing street and fast trail riding with some occassional tight stuff. I'm guessing that 13/46 would be equal to 14...

Maniot · Maniot

Hi all.......just wondering if anyone has any tips for removing the front sprocket on a 1998 OE ? I'm in the process of changing the existing 14 tooth front sprocket for one with 13 teeth. The sprocket retaining nut came off with no fuss at all (almost too easily!) but the sprocket seems reluctant to pu...

spit · spit

Hi all Currently I have a 14/50 set up, which works well off road on the easy tracks in Hertfordshire, UK. Top speed on the road is about 102 kph (63mph) I think I'd like to do the Institute of Advanced Motorists test, and a prerequisite is the bike must be able to do above 70mph. What gearing do you think I ne...

Topic		Started By	Replies	Views	Last Post
	Gearing question (Preview) Im going to use my TTR for some long distance trials what gearing would be suitable I'm thinking 14 52 ?	Gary	3	2860	Jan 9, 2016 by peteBLUEttr
	13/52 gearing Chain Gang 13/52 sprocket ratio (Preview) Greeting All So I fitted my 13/52 gearing today and had a bit of a ride down the back firetrail this combo seems to work really well, I can go down to almost stopped, and move so slowly in first gear that it doesn't even register on the speedo I normally have my Idle set so the motor is just above stopping so yo...	BM Steve	13	9514	Dec 3, 2015 by Wally
	gearing issue for a newby (Preview) hi guys, I am new here so forgive me if I go over old ground/ issues. I have an 09 ttr250, it has a gear combo of 13/40. I have read a few threads on here n it seems as tho its a very high ratio. I use my bike as a commuter, and have a second set of wheels for dirt play. mainly easy stuff with a bit of climbing as well. m...	Bigbadbenno	6	2830	Nov 2, 2015 by BM Steve
	Suspension Linkage (Preview) Trying to swap out the kouba lowering link for the original length. I've taken the plastic caps off the swing arm to remove the 17mm bolts and sleeve. Trouble is, the bolt and sleeve just spin around. I can see the sleeve has two flat edges, but obviously whatever surface was holding is still has been kna...	Moo	3	3011	Oct 29, 2015 by pug
	Torque settings (Preview) I have just fitted a new chain and front and rear sprockets and was wondering if any of you kind peeps can tell me the appropriate torque settings?? (metal tank 98 If memory serves my right) Ive got the manual here very kindly supplied by Brian but I canny find the darn info....I might have to see if I can ge...	Tommy the cat	6	7123	Oct 28, 2015 by JOHNYBOY
	13/50 and mt43 problems (Preview) Hi Everyone I had a bit of a problem............... Fitted a new mt43 on my bike, the gearing was 13/50 which I quite liked, not to much loss on the road and very good in the lanes. Well I could not get the 520 chain tight enough unless it was on the very last setting on the snail, so no room for tightening when...	ttr steve	13	3548	Sep 12, 2015 by petenz
	kmh conversion (Preview) good evening,im still finding my way around my ttr and maybe someone can help with this.my 96 oe has 15/44 sprockets fitted and i have had it clocked at 30mph,mine was showing 43kmh,does this mean that 60 mph =86kmh shown?,also whilst i'm here any info for the correct chainset sizes for my year as it's...	admbnm	4	2447	Aug 24, 2015 by admbnm
	Rear wheel bearing spacer length (Preview) Could someone advise the overall length of the rear wheel bearing spacer that the axle goes through? Mine is missing and I thought I'd just make a new one. Thanks, Rick Colorado Springs, CO	zzrdd	2	1639	Aug 17, 2015 by TTRfan
	Same ratio, but----- (Preview) Fed up with the chain rattling against the Case Saver, but not wanting to lose that bit of protection: I changed from 14/50(3.57:1) to 13/46(3.53:1), there's no noticeable difference in the overall ratio, the bike rides just the same, but, thankfully, the rattle has gone. Incidentally, 14/50 need...	dogwheel	3	1799	Aug 2, 2015 by dogwheel
	Loose chain (Preview) i was ridding on the road luckily only about 30kph and the chain joiner broke or unclipped itself. I couldnt find all the pieces so had to call blossum to pick me up with the trailer. Problem being she couldnt hook up the trailer so it was a double trip In the car. The chain wasnt that loose , only with a sligh...	Markvan	7	2960	Jun 30, 2015 by Fladdem
	Spare set of wheels - different gearing (Preview) Hey everyone, I've got 13/48 gearing on my bike. I've just bought a second set of rims to run my 50/50 tyres on and thought I might go a 46 rear sprocket. Anyone know if the chain set for 13/48 will still fit with a rear 46. Chain adjusters are on 8.2 currently. Can't remember how many links. I'm prett...	leigh	2	1626	Jun 11, 2015 by petenz
	JT ..... TTR250 sprockets (Preview) just ordering some diffrent gearing... thought i would post the JT sprocket catalogue for the TTR250 HERE ====> http://www.jtsprockets.com/catalogue/model/2738 -- Edited by petenz on Friday 12th of June 2015 10:28:24 PM	petenz	0	1385	Jun 7, 2015 by petenz
	spoke guards what do you think ?? (Preview)	badmad	5	1358	Apr 30, 2015 by BM Steve
	Proper chain adjustment? (Preview) just installed a new chain and drive sprocket on my 2000 TTR250, i adjusted the chain as per the manual with it up in the air on a stand so the front and rear tires hang free and the adjusted the slack to about 1.65 inches up down movement, set the bike down and ride around and it just seems like it has a t...	TTR-Tony	9	9899	Feb 22, 2015 by dogwheel
	Chain size. (Preview) Just checking so i get the right chain size. RK have a 520 size oring chain and the shop says it will fit My auzzy 2004 model. Reason why im double checking as had problems getting the right joiner link. Got two 520s from the shop and neither fitted. Mines a 520 V2 both i got were to short to go through for th...	Markvan	1	1692	Jan 27, 2015 by Markvan
	Maybe a stoopid question I heard (Preview) When I changed the gearing on my old Fireblade the speedo stopped being accurate, will a change of the front sprocket do the same on the OE, I thought I read someone mention this somewhere. Will be contacting Brian once the salt has gone from the roads regards new chain and sprockets but need to make sure...	j180	5	1474	Jan 23, 2015 by j180
	Gearing question (Preview) Hello everyone my TTR has currently a 13/44 set up which I dont like. It feels far to tall and I don't seem to have a lot of low down power? i was thinking of going 14/50? Would this give me more low down drive?	TTRHead	16	4149	Jan 22, 2015 by BM Steve
	Chain lube..... (Preview) Manual says engine oil, some people also say use engine oil. Personally i find this very hard to do without messing everything up. What do you guys recommend? -- Edited by davecambo on Monday 13th of February 2012 09:50:10 AM	davecambo	7	4169	Jan 4, 2015 by locky
	help i need new chain and sprockets (Preview) but not got a clue as to what to get. Upon giving the chain a good clean I found some of the links have seized. I am pretty sure i have the standard set. I use the bike for commuting and for green lanes. Around Surrey it is fairly hilly. but I do not know. what is the standard sprockets and chain?	widge	6	1558	Nov 30, 2014 by Serial
	Chain/Sprocket/Tyre Combinations (Preview) I know there's been a few threads on chain/sprocket combinations, but I though I'd start a thread from my experiences that gives a few sprocket, links, tyre and adjuster combinations and what sort of clearances they give at correct chain tension. Maybe this can build up over time into a referenc...	Padowan	6	1712	Nov 2, 2014 by Pinman
	Is my chain safe? Should I replace it? PICTURE (Preview) Notice the one link has a flat pin, like it was grinded down. This is not the master link, there is another one just like it, so there are atleast two pins like this. The chain feels and looks completely fine in every other aspect. thank you	mypobox	6	1425	Oct 26, 2014 by comeragh
	12t front sprocket (Preview) Anyone know where I can get one for my 04 ttr	TTRHead	6	1673	Oct 16, 2014 by petenz
	Hooking 13 tooth front sprocket. (Preview) Its only been on 3500km with all road riding although i did do 500 km on the beach mostly hard sand. Kept the chain lubed as much as i could in between rides. I did notice a clicking sound as i accelerated slowly in 1st 2nd and 3rd. But when i coasted it was quiet. The 14 tooth. Standard yamaha sprocket is bac...	Markvan	3	1679	Oct 7, 2014 by Markvan
	15 tooth (Preview) Dose a 15T engine sprocket fit inside the de-railer plate on the motor ? looks like theres enough room... Is there ?	petenz	3	1266	Aug 11, 2014 by Lin
	opinions on a 12 tooth drive sprocket? (Preview) I just got my new used 2003 TTR 250 and had it out in the dirt. Overall the gearing seemd pretty good but I was wondering what it would be like with a 12 tooth up front. I have the stock gearing which I think is 13/52 or so it says in my owners manual. I am really only going to use it on the trails. Any feedback app...	Rger8	14	4506	Jun 7, 2014 by petenz
	Lowering chain guide (Preview) http://ttr250.activeboard.com/t48120247/sprocket-question/)	Harleyquin	12	3497	May 29, 2014 by TT-R250M
	Change to 520 chain (Preview) Hi I've posted here about the sprockets on my 1994 Raid (4GY4 with 18/57T and 428 chain). I'm now contemplating changing the sprockets and chain to 520 but I seem to remember reading a post that said that the 520 chain would foul the digital sensor at the front sprocket. Now I can't find that post - can a...	Harleyquin	1	1673	May 7, 2014 by TTRfan
	How does this gearing sound? (Preview) I went on a big ebay bender and order a chain and sprocket kit. I don't nessacerly need the new chain, but I sure don't mind having a spare. The sprockets are 13t front and 46t rear. I'm mostly doing street and fast trail riding with some occassional tight stuff. I'm guessing that 13/46 would be equal to 14...	Terrence R	1	1384	Feb 24, 2014 by TT-R250M
	Difficulty removing front sprocket with nut off.... (Preview) Hi all.......just wondering if anyone has any tips for removing the front sprocket on a 1998 OE ? I'm in the process of changing the existing 14 tooth front sprocket for one with 13 teeth. The sprocket retaining nut came off with no fuss at all (almost too easily!) but the sprocket seems reluctant to pu...	Maniot	14	4398	Feb 11, 2014 by Maniot
	road riding-sprocket sizes? (Preview) Hi all Currently I have a 14/50 set up, which works well off road on the easy tracks in Hertfordshire, UK. Top speed on the road is about 102 kph (63mph) I think I'd like to do the Institute of Advanced Motorists test, and a prerequisite is the bike must be able to do above 70mph. What gearing do you think I ne...	spit	7	4014	Jan 21, 2014 by Fladdem
«First < 1 2 3 > Last» \| Page of 3 sorted by