Hello everyone, just bought a TTR from 2005 but the speedometer was not mounted. Now I try to put it back but it seems not to fit (the holes are not aligned). Can one of you take a picture of the mounting points of the speedometer so I understand how it should me mounted? Thanks in advance for your help! Bori...
Just recorded a vid of my TTR - just got it last week. Sometimes there's a heavy clunk when I kill the engine, sometimes no clunk, sometimes just a small one. I'm hoping someone with experience of these things can shed some light. Thanks, Paul -- Edited by PaulF...
First ride on the TTR since I stripped it last week, I was chasing a handling issue mainly on turn in, I had checked the swingarm for movement, checked the steering head bearings, tried different tyres etc. After riding the bike last week I stripped the steering, the lower steering bearings were bugge...
My son came home for the weekend we got the Dr and ttr out in the local forest starting to get a bit dusty. Got out for about four hours of tighter stuff
Heidenau K60 in 130/80/18 on the left. Pirelli MT21 in 120/80/18 Michelin Tracker in 100/100/18 on the right. These are the only tyres I've tried so far so the comments are relative to these three tyres in UK conditions. I am searching for a green lane/TET tyre. Heidenau's were comfortable and fun on r...
Hello, i have a ttr250 raid and i would like to fit after market springs. I would like to ask if anyone knows if ttr 250 raid gets the same springs with open enduro. If you have any suggestion for after market springs i d appreciate that! My weight is 90 kg and my luggage weight almost 20 kg. Thank you!
Hi, I'm Paul, I just got my first TTR250 last week, for greenlaning round Gloucestershire. It's a 2000 blue one with the plastic tank, although it has the purple wheels too. Not sure I believe the mileage (8k, they must have been very hard miles!) it's a bit tattier than I first thought so expecting to fi...
Hello everyone, this is Boris from south of France. Just bought this TTR 250 from 2005 to go offroad. Looking forward to meet you -- Edited by boris04300 on Monday 14th of September 2020 11:26:23 AM
It's not a TTR but is a twofiddy......... https://www.youtube.com/watch?v=_8abVgo0JOA If you have idle moments you might enjoy Roz's adventures (there are other vids). She is quite a card and very much a talker - and not a bad adventure riding blogger. Ciao. I hope you are all covid free and wel...
I bought my son, a TTR-250 2001 model. He is 6'3 and the previous owner was 5' nothing. He had cut most of the foam out of the seat and the vinyl seat cover had perished. So I bought some foam and Vinyl from Clark Rubber in Sydney. The foam was cheap because in was an off cut. I had to glue two pieces together...
Hello, i have a ttr250 raid and i would like to fit after market springs. I would like to ask if anyone knows if ttr 250 raid gets the same springs with open enduro. If you have any suggestion for after market springs i d appreciate that! My weight is 90 kg and my luggage weight almost 20 kg. Thank you!
I've only just got my 2001 TTR and have noticed a problem with the speedo. When I take off for a ride the speedo needle doesn't move but the odometer is clicking over, which suggests to me that the drive cable is doing its job. After some time and a solid whack on the speedo it jumps to life and is OK for the res...
Alright guys, First time caller, long time listener. Im on my second TTR, blue tank 2001. 4K on the clock, lovely old girl very clean but stills sees all the mud! Thanks for this forum and everyone that inputs! Also shout out to Steve and Lisa from tottally TTR's, fantastic service! (I dont know them, t...
I have a vague recollection that someone was looking for a cylinder head. Totally TTRs has just got one in the shop - see here https://totallyttrs.com/epages/699105d9-e4cc-4b32-b236-84e72cd67f84.sf/en_GB/?ObjectPath=/Shops/699105d9-e4cc-4b32-b236-84e72cd67f84/Products/TTR-05...
Hey guys, just scored my second TTR250, an 06 model with 14,000ks. The bike was a one owner from new and has sat for 6 years untouched- I was told it ran fine when parked last. So far I have changed the filters, plug, rebuilt the carby, new battery etc. The bike starts and idles awesome and revvs "ok" in neut...
Hi! anyone knows if I can use a plastic tank’s engine on a bike with a metal tank? the only tricky point seems to be the speedo pickup, that is different... can I fit the digital pickup of the earlier metal tank bike on a later engine? thanks R
I was lucky to find a '95 TTR250 Raid, it was not officially released here in the Philippines. Shifting is a little rough. I already ordered a new clutch cable, I hope that fixes the problem. Also speedometer is dead. Looking for a way to convert it to a mechanical one.
Hi. I m using my TTR OE mostly for commuting in the city and some light enduro riding. From time to time, I ride with a pillion on the bike and naturally the bike kinda ´sits´. I stiffen the rear shock and the ride is ...ok but It makes me wonder if I m damaging the subframe by riding with pillions since its suc...
Hello everyone :) My name is Konrad, I live in Warsaw, Poland. At least for 10 years riding motorcycles, I'm fascinated on off-road riding. I have some heavy adventure bikes but looking also for something really light weight like TT250R which is very reliable off-road. I'm happy to welcome everyon...
Hi guys Looking for this grab handles which are located under rear mudguard. -- Edited by Konrad on Friday 4th of September 2020 08:13:54 AM-- Edited by Konrad on Friday 4th of September 2020 08:14:25 AM-- Edited by Konrad on Monday 7th of September 2020 11:46:31 AM
lowering link, Kubo 20, with grease nipple, looks new and un-used to me, ie mint. £75 incl postage-I think new they are £135? cheers BC NOW SOLD, thanks V much -- Edited by Belstaff on Saturday 29th of August 2020 04:23:41 PM
Still getting a jet black spark plug after carb refurbishment where I replaced all rubbers and jets and adjusted fuel/air mixture. What could it be other than the carb? Or could it be I need a new carb all together?
Stripping down an engine tonight, I used the "jam the sprocket with a socket" technique - worked a treat An odd thing, the nut needed a 32mm spanner (I haven't got a deep socket that size) and I am sure that nearly every other sprocket nut I have encountered is 30mm I will try and remember to check it out...
Google translate Good morning.I dressed my baby girl TTR in new clothes.Bought in a Polish company.-- Edited by tom13 on Friday 21st of August 2020 08:15:30 PM
