A forum for owners of Yamaha TTR250 trail and enduro bikes!

I did a lot of searching and read a lot about uncorking the TTR250 with a lot of good information. The problem that I am running into are the specifics. I have a 1993-1994 TTR250 that I just got professionally painted black. It looks incredible! I'll post some pictures when I can. As I looked for all of th...

Hi guys i have a 2001 Yamaha ttr250 and when we got it we noticed that when you rev it the revs don't go back to idle they stay at the revs you were on and the only way you can get it back down is if you quickly rev the throttle. We have cleaned the carb checked the throttle cables and checked the choke but nothing...

Hello I just bought a 2005 ttr250 with a ffm pipe, an it is running me in circles. it has fresh fluids, new air filter an battery, the bike starts right up no problem but after about 45 min or so of slow trail riding it begins to bog out an dies. It will only start with the choke on an them idles high as the sky an...

I recently purchased a 2006 TTR 250 which sat unused for years. I am not a very experienced mechanic. After cleaning the carb and jets, new tire, air filter, battery etc I started it and, like an idiot, ran it without even checking the oil. Soon I heard a loud noise from the engine sounding like a wrench t...

Okay, I took my engine out to take it to a shape to get my top end rebuilt. But not that I have it back, I'm having trouble figuring out the wiring. I have been looking at wiring diagrams, but I'm terrible at trying to figure out what I'm looking at. Im stuck, bring to figure out what this wire needs to be conn...

I need some help determining the exact model of my TTR. The VIN is telling me that is a 1999 so I have that much down. I am trying to determine if I have a UK model or a US model. It has both electric and kickstart which, to my understanding, was only on the UK models; however, it does not have a speedo which shou...

I have a 99 TTR250. I noticed a semi-wet spot, nothing major, on my engine black and began to investigate. I noticed this weird part sticking out of the engine and I assumed it was something stock, but after further research and reading through the service manual, there is no mention of this. What could...

	Forum	Replies	Views	Last Post
exhaust muffler help ttr250 1994 1993 Help Uncorking the TTR250 (Preview)	Repairs and maintenance	7	8999	Feb 27, 2013 by davecambo
I did a lot of searching and read a lot about uncorking the TTR250 with a lot of good information. The problem that I am running into are the specifics. I have a 1993-1994 TTR250 that I just got professionally painted black. It looks incredible! I'll post some pictures when I can. As I looked for all of th...
choke throttle carb throttleproblems help Help - my TTR stays on high revs!!!!!! (Preview)	Repairs and maintenance	47	80451	Mar 15, 2024 by ttr steve
Hi guys i have a 2001 Yamaha ttr250 and when we got it we noticed that when you rev it the revs don't go back to idle they stay at the revs you were on and the only way you can get it back down is if you quickly rev the throttle. We have cleaned the carb checked the throttle cables and checked the choke but nothing...
Help New to 4 strokes and lost. (Preview)	Repairs and maintenance	2	2422	Jul 25, 2014 by Chrisj796
Hello I just bought a 2005 ttr250 with a ffm pipe, an it is running me in circles. it has fresh fluids, new air filter an battery, the bike starts right up no problem but after about 45 min or so of slow trail riding it begins to bog out an dies. It will only start with the choke on an them idles high as the sky an...
loud knock in motor newbie help loud ting or clack in motor ( 1 2 ) (Preview)	Just joined the forum?	50	13843	Jul 8, 2015 by ttboof
I recently purchased a 2006 TTR 250 which sat unused for years. I am not a very experienced mechanic. After cleaning the carb and jets, new tire, air filter, battery etc I started it and, like an idiot, ran it without even checking the oil. Soon I heard a loud noise from the engine sounding like a wrench t...
wiring Trouble rebuilt top end help Wiring trouble! HELP!!!!!! (Preview)	Projects and restorations	2	2514	Apr 24, 2016 by Smith16
Okay, I took my engine out to take it to a shape to get my top end rebuilt. But not that I have it back, I'm having trouble figuring out the wiring. I have been looking at wiring diagrams, but I'm terrible at trying to figure out what I'm looking at. Im stuck, bring to figure out what this wire needs to be conn...
identification uk us version model help Need some help identifying... (Preview)	Repairs and maintenance	5	2073	Jul 3, 2019 by Kaos
I need some help determining the exact model of my TTR. The VIN is telling me that is a 1999 so I have that much down. I am trying to determine if I have a UK model or a US model. It has both electric and kickstart which, to my understanding, was only on the UK models; however, it does not have a speedo which shou...
help identify mod modification What the hell is this thing sticking out of my engine?! (Preview)	Repairs and maintenance	12	2207	Aug 29, 2019 by robs
I have a 99 TTR250. I noticed a semi-wet spot, nothing major, on my engine black and began to investigate. I noticed this weird part sticking out of the engine and I assumed it was something stock, but after further research and reading through the service manual, there is no mention of this. What could...