A forum for owners of Yamaha TTR250 trail and enduro bikes!

rattlyolddt · rattlyolddt

My front caliper is completely shot so am on the hunt. Does anyone know what others share the caliper? Thanks

Cubber · Cubber

Here are a couple of pages showing the ORIGINAL specification for a 2000 vintage TTR250. Martyn

TTRfan · TTRfan

http://www.ttr250.com/Sprag_replacement/TTR_sprag_replacement.htm

spadey99 · spadey99

Hi guys ok so my bike is 04 with full FMF Q pipe, standard apart from that I reckon. I dont expect miracles from the bike but what should I do for best results bearing in mind ive had DRZ 400s KDX 220s so not expecting that power but they both had mechanical water seals fail hence wanted air cooled.... Air...

fwtian · fwtian

A few hours ago i just finished the disassebly of my Top End. I want to ask some questions. 1st: Α piece of gasket glue fall down from the cam chain... Is it going to do any damage to the engine? It must be taken off? 2nd: i had the engine at TDC but while i was trying to get the piston pin out i moved it a little. Th...

LRJ · LRJ

First of all, I really like my new (to me) 2000 TTR-250. But, is there a modern, small bike on which this is a more difficult task to do well? First of all, little bay in which the plug is placed is a terrific place to collect dirt leaves, small rocks, sand, etc. Second, you can't see what is there to make su...

rattlyolddt · rattlyolddt

Is the polisport item a viable UPgrade or is it the SAMEgrade. I mean is it much brighter?? My friends have polisport lights on KTMs but there 100w, I noticed the polisport item is the same wattage as standard. Any other suggestions?? I have an Open Enduro BTW.

Dave · Dave

My rear gear lever appears to have developed a reasonable amount of play on it, side to side and now rests nearer to the engine than I would like for my foot to "find" the lever I've just had it apart and it seems loose in the mounting hole - any ideas on how to sort this/what bits I need to replace...

BM Steve · BM Steve

Hi All Any Shooters out there ? well I am and I have a 5 gun safe and only 1 gun, the safe came with 5 trigger locks, well guess what, they work perfectly as disc locks as well. Handy hey BMSteve

TTRfan · TTRfan

I recently bought a TTR that had starter gear problems and was kickstart only. It was only used off road so had no need for lights etc. The previous owner must have been quite knowledgeable about bike electrics because he managed to get a working TTR using only a very small part of the original loom as in t...

TTRfan · TTRfan

http://www.youtube.com/watch?v=BE1qG9iQZlg&feature=player_embedded

BM Steve · BM Steve

OK, first off, when sitting still and idling the engine just purrs and when you give a a good rev and hold it still the same just a louder faster purr, I even have a medical Stethoscope and there are no strange noises coming from the head or really anywhere Now when on the trail and you crank on the gas slowly...

shack · shack

Time for some new tyres and stumbled across these, looks like a bit of a deal to me, I'm I missing anything before I send the order button! Our Price: £90.00 Quantity: Normal Price: £130.00 You Save: £40.00 % Saved: 30.77%MICHELIN AC10 has the necessary certification to be legal for use on public roads...

shack · shack

Hi all, basic questions time. I haven't got any rim locks, but guess they would be a good idea, I have a couple of rubber bungs- so: Do I just buy some locks and they are really straight forward to attach? Do I need a certain size (s) Can I really muff it up as I'm not sure really what I'm doing. Thanks as ever

tracker · tracker

Brian looking in the Q&A, i noticed that you have the wrong DP No. i.e. DP 411 should be DP211.

BM Steve · BM Steve

HI All Can anyone advise which pads I should order, front and rear, as usual the TTR is left out Thanks Steve EBC MXS Brake Pads Yamaha: CRF150R ‘07-10 Rear (MXS-346) (MXS-346) YZ125 ‘98-02 Front (MXS-185) (MXS-185) CR250R ‘87-92 Rear (MXS-131) (MXS-131) YZ125 ‘03-10 Front (MXS-185) (MXS-185) CR...

Darren · Darren

Been riding in mid depth water and my bikes been cutting out. Symptoms... Cuts out and restarts easy enough but coughs and splutters until you get a full revs and then everything is normal then cuts out asoon as you hit the same depth of water??????? Checked spark cap all looks good changed plug... R...

new boy · new boy

Hi all would you recommend washing the airfilter in petrol? there seems to be some that would and some that wouldn't, the manuels says not but have conflicting views between mechanics here in NZ, any help much apprciated, cheers newboy

BM Steve · BM Steve

Hi all Can anyone tell me what this thing is, I pulled it appart the other day and it was full of water and the various parts were all full of sludge, so it's all clean now but what does it do and is it even needed ? Can't I just connect the breather pipe from the head streight to the airbox ? Pic Thanks Steve

new boy · new boy

Hi all, i did a big ride at wkend and on cleaning bike up after had real problems getting dirt/stones /grass and all the other stuff out from behind the plastic cover that holds the electronic reader for the speedo, the speedo doesn't work any way and i don't need it. After removing it to clean around fro...

Jl · Jl

hello everyone bran new to this> i just got a 02 ttr 250. had for 6 months. amazing bike love it! just started to have problems 2 months ago. it starts fine runs for about ten minutes then bogs out, and then just dies. i have done some research and found that it could be a few things. did all the cheapest s...

Dave · Dave

I've just been trying to remove my acerbis handguards, the expander bolt thing inside the bars and try as I may I cannot get them to budge! Am I just being dozy and missing something obvious?? Cheers

TTRfan · TTRfan

http://www.ttr250.com/Removing_carb/TTR_carb_removal.htm

yamahaTT250R · yamahaTT250R

Hey guys i have had my australian 2000 mod TTR since early 2009 and there has been no problems yet (good) but 3 days ago i noticed some oil started dripping after i had come back after a ride and cannot find where it is coming from i cleaned all the oil off it and the next day after i rode home i noticed it again,...

problemaddict · problemaddict

Hi guys, I've got an '01 TTR250 that's been converted for street use here in the US. I lost my low beam a while ago and went searching for a new bulb. The bulb in there is a "KOITO 35w/36.5w Halogen" and its 30 freakin dollars to replace. The bulb doesn't cross reference with anything, but an H...

alan · alan

What is the castle like structure on the top of the manifold?. Can i remove it to make a bit more room when removing the carb? ie push the manifold back into the airbox. Must say looks a bit permanent.

new boy · new boy

Hi, I am a month into owning a ttr 250 93/94, my first bike, loving it and is great for NZ riding. I am taking part in a trail ride on Saturday, which specifies you have to have a sprk arrester, do i have one on already? if so where is it. i have down loaded the manuel online, which states one but is probably for a...

BM Steve · BM Steve

I was going to make some new stickers for the TTR, my usual job is as a signwriter so easy enough to make some new ones but to save time and effort does anyone have any original templates, preferably as PDF or EPS vector files, would be very helpful. If no one has any, is anyone interested in a set (the setup f...

Aidan · Aidan

Well decided to check my swing arm and all the linkages and give them a regreace. I havnt had a look at them since I got the bike a year ago...... Well let's just say the idiot who had the bike before me hasn't looked at them since the bike was made in 2000. Soo looks like anouther expensive rebuild. Some of th...

shack · shack

Hi all, just picked up my Raid yesturday and doesn't seem to be a great deal of oil in it, How much should I see through the sight window on LHS of the engine? I don't see to have a dipstick (told you I'm new to this machine) so I'm guessing the window gives you all the info you need. I'm looking to do an oil and fi...

Topic		Started By	Replies	Views	Last Post
	front caliper commonality (Preview) My front caliper is completely shot so am on the hunt. Does anyone know what others share the caliper? Thanks	rattlyolddt	7	1399	Dec 13, 2011 by TTRfan
	TTR250 Original Specification (Preview) Here are a couple of pages showing the ORIGINAL specification for a 2000 vintage TTR250. Martyn	Cubber	2	7019	Dec 13, 2011 by Cubber
	Simple step-by-step pictorial guide to replacing a sprag clutch (Preview) http://www.ttr250.com/Sprag_replacement/TTR_sprag_replacement.htm	TTRfan	5	2049	Dec 13, 2011 by TTRfan
	My bike and what mods should I do??? (Preview) Hi guys ok so my bike is 04 with full FMF Q pipe, standard apart from that I reckon. I dont expect miracles from the bike but what should I do for best results bearing in mind ive had DRZ 400s KDX 220s so not expecting that power but they both had mechanical water seals fail hence wanted air cooled.... Air...	spadey99	3	2628	Dec 12, 2011 by spadey99
	TTR 250 Top End rebuild (Preview) A few hours ago i just finished the disassebly of my Top End. I want to ask some questions. 1st: Α piece of gasket glue fall down from the cam chain... Is it going to do any damage to the engine? It must be taken off? 2nd: i had the engine at TDC but while i was trying to get the piston pin out i moved it a little. Th...	fwtian	45	9954	Dec 12, 2011 by fwtian
	Changing The Spark Plug (Preview) First of all, I really like my new (to me) 2000 TTR-250. But, is there a modern, small bike on which this is a more difficult task to do well? First of all, little bay in which the plug is placed is a terrific place to collect dirt leaves, small rocks, sand, etc. Second, you can't see what is there to make su...	LRJ	4	5082	Dec 12, 2011 by LRJ
	Aftermarket headlight suggestions?? (Preview) Is the polisport item a viable UPgrade or is it the SAMEgrade. I mean is it much brighter?? My friends have polisport lights on KTMs but there 100w, I noticed the polisport item is the same wattage as standard. Any other suggestions?? I have an Open Enduro BTW.	rattlyolddt	0	1056	Dec 10, 2011 by rattlyolddt
	Play on rear gear lever (Preview) My rear gear lever appears to have developed a reasonable amount of play on it, side to side and now rests nearer to the engine than I would like for my foot to "find" the lever I've just had it apart and it seems loose in the mounting hole - any ideas on how to sort this/what bits I need to replace...	Dave	0	1084	Dec 8, 2011 by Dave
	New Use For Trigger Locks (Preview) Hi All Any Shooters out there ? well I am and I have a 5 gun safe and only 1 gun, the safe came with 5 trigger locks, well guess what, they work perfectly as disc locks as well. Handy hey BMSteve	BM Steve	1	1054	Dec 7, 2011 by Cubber
	Lightweight wiring loom? (Preview) I recently bought a TTR that had starter gear problems and was kickstart only. It was only used off road so had no need for lights etc. The previous owner must have been quite knowledgeable about bike electrics because he managed to get a working TTR using only a very small part of the original loom as in t...	TTRfan	4	2378	Dec 1, 2011 by TTRfan
	Tyre changing video (Preview) http://www.youtube.com/watch?v=BE1qG9iQZlg&feature=player_embedded	TTRfan	7	1945	Nov 29, 2011 by TTRfan
	Is this sound normal ? (Preview) OK, first off, when sitting still and idling the engine just purrs and when you give a a good rev and hold it still the same just a louder faster purr, I even have a medical Stethoscope and there are no strange noises coming from the head or really anywhere Now when on the trail and you crank on the gas slowly...	BM Steve	2	1430	Nov 28, 2011 by BM Steve
	Tyre Bargain (Preview) Time for some new tyres and stumbled across these, looks like a bit of a deal to me, I'm I missing anything before I send the order button! Our Price: £90.00 Quantity: Normal Price: £130.00 You Save: £40.00 % Saved: 30.77%MICHELIN AC10 has the necessary certification to be legal for use on public roads...	shack	3	1346	Nov 24, 2011 by rattlyolddt
	Rim Lock- basics (Preview) Hi all, basic questions time. I haven't got any rim locks, but guess they would be a good idea, I have a couple of rubber bungs- so: Do I just buy some locks and they are really straight forward to attach? Do I need a certain size (s) Can I really muff it up as I'm not sure really what I'm doing. Thanks as ever	shack	7	3560	Nov 22, 2011 by TTRfan
	PADS (Preview) Brian looking in the Q&A, i noticed that you have the wrong DP No. i.e. DP 411 should be DP211.	tracker	1	1203	Nov 20, 2011 by TTRfan
	Which Pads (Preview) HI All Can anyone advise which pads I should order, front and rear, as usual the TTR is left out Thanks Steve EBC MXS Brake Pads Yamaha: CRF150R ‘07-10 Rear (MXS-346) (MXS-346) YZ125 ‘98-02 Front (MXS-185) (MXS-185) CR250R ‘87-92 Rear (MXS-131) (MXS-131) YZ125 ‘03-10 Front (MXS-185) (MXS-185) CR...	BM Steve	1	1422	Nov 15, 2011 by TTRfan
	Help cutting out in mid-depth water (Preview) Been riding in mid depth water and my bikes been cutting out. Symptoms... Cuts out and restarts easy enough but coughs and splutters until you get a full revs and then everything is normal then cuts out asoon as you hit the same depth of water??????? Checked spark cap all looks good changed plug... R...	Darren	11	1768	Nov 14, 2011 by TTRfan
	air filter (Preview) Hi all would you recommend washing the airfilter in petrol? there seems to be some that would and some that wouldn't, the manuels says not but have conflicting views between mechanics here in NZ, any help much apprciated, cheers newboy	new boy	3	1562	Nov 14, 2011 by shack
	What is this bit ? (Preview) Hi all Can anyone tell me what this thing is, I pulled it appart the other day and it was full of water and the various parts were all full of sludge, so it's all clean now but what does it do and is it even needed ? Can't I just connect the breather pipe from the head streight to the airbox ? Pic Thanks Steve	BM Steve	3	2450	Nov 14, 2011 by BM Steve
	93 enduro, front sprocket prtection (Preview) Hi all, i did a big ride at wkend and on cleaning bike up after had real problems getting dirt/stones /grass and all the other stuff out from behind the plastic cover that holds the electronic reader for the speedo, the speedo doesn't work any way and i don't need it. After removing it to clean around fro...	new boy	1	1245	Nov 14, 2011 by Cubber
	ttr250 wont run (Preview) hello everyone bran new to this> i just got a 02 ttr 250. had for 6 months. amazing bike love it! just started to have problems 2 months ago. it starts fine runs for about ten minutes then bogs out, and then just dies. i have done some research and found that it could be a few things. did all the cheapest s...	Jl	6	1983	Nov 13, 2011 by Jl
	Handguard Removal (Preview) I've just been trying to remove my acerbis handguards, the expander bolt thing inside the bars and try as I may I cannot get them to budge! Am I just being dozy and missing something obvious?? Cheers	Dave	2	1167	Nov 12, 2011 by Dave
	Removing a TTR250 carb (Preview) http://www.ttr250.com/Removing_carb/TTR_carb_removal.htm	TTRfan	1	2140	Nov 12, 2011 by alan
	Oil leaking from somewhere only after its been ridden (hot) (Preview) Hey guys i have had my australian 2000 mod TTR since early 2009 and there has been no problems yet (good) but 3 days ago i noticed some oil started dripping after i had come back after a ride and cannot find where it is coming from i cleaned all the oil off it and the next day after i rode home i noticed it again,...	yamahaTT250R	5	4695	Nov 11, 2011 by TTRfan
	$30 light bulb?!? wtf?!? (Preview) Hi guys, I've got an '01 TTR250 that's been converted for street use here in the US. I lost my low beam a while ago and went searching for a new bulb. The bulb in there is a "KOITO 35w/36.5w Halogen" and its 30 freakin dollars to replace. The bulb doesn't cross reference with anything, but an H...	problemaddict	12	4774	Nov 11, 2011 by Dullthud
	1996 raid. rubber manifold from carb to airbox (Preview) What is the castle like structure on the top of the manifold?. Can i remove it to make a bit more room when removing the carb? ie push the manifold back into the airbox. Must say looks a bit permanent.	alan	2	1631	Nov 10, 2011 by Cubber
	Spark Arrester (Preview) Hi, I am a month into owning a ttr 250 93/94, my first bike, loving it and is great for NZ riding. I am taking part in a trail ride on Saturday, which specifies you have to have a sprk arrester, do i have one on already? if so where is it. i have down loaded the manuel online, which states one but is probably for a...	new boy	1	1265	Nov 9, 2011 by TTRfan
	New Stickers (Preview) I was going to make some new stickers for the TTR, my usual job is as a signwriter so easy enough to make some new ones but to save time and effort does anyone have any original templates, preferably as PDF or EPS vector files, would be very helpful. If no one has any, is anyone interested in a set (the setup f...	BM Steve	4	1437	Nov 9, 2011 by Aidan
	Rear swing arm (Preview) Well decided to check my swing arm and all the linkages and give them a regreace. I havnt had a look at them since I got the bike a year ago...... Well let's just say the idiot who had the bike before me hasn't looked at them since the bike was made in 2000. Soo looks like anouther expensive rebuild. Some of th...	Aidan	17	2922	Nov 9, 2011 by Aidan
	Raid newbie questions (Preview) Hi all, just picked up my Raid yesturday and doesn't seem to be a great deal of oil in it, How much should I see through the sight window on LHS of the engine? I don't see to have a dipstick (told you I'm new to this machine) so I'm guessing the window gives you all the info you need. I'm looking to do an oil and fi...	shack	4	1368	Nov 8, 2011 by colin13846
«First < 1 … 62 63 64 65 66 > Last» \| Page of 66 sorted by