I bought a bike form a friend recently, he had had it for 2 years and had maybe be done 4 miles. The tachometer says 2000 miles. I took my UK bike license a very long time ago but not my Colorado one. The test I am sure is very easy, the car one was a bit of a joke, but dealing with the DMV is another matter. They wil...
Hi all, it's time to part with the TTR as my garage and shed are overflowing with bikes and bits of bikes, since the TTR is getting used the least it's the one for the chop. The bike is a 1995 open enduro model with a larger headlight and Supermoto wheels (talon hubs and excel rims from a Yamaha wr450 with spa...
It's been glorious weather recently. I have been out around my local trails and can report that it's been very pleasant. I'll bet a few of us will know one of the places I went. Long may it last. Martyn
I get quite a lot of butchered looms, switches, etc, which require repairs and, inevitably, joining of wires! I am unhappy about soldering joins in a bike loom as it makes a very solid and unforgiving joint from which wires can break. Bullet connectors and the like are OK for joining a couple of wires bu...
Hello !!! I bought my tt250 raid 2 years ago. Unfortunately i can't show you my iron horse right now because it's disassembled at the moment. Just want to fix some problems before moto season. Best regards, Dmitriy
Hello, I look for the disposal of the magnets of the starter for my yamaha TTR 250. I changed the axis that was worn. I will like to know in which direction it turns, For I climbed back up it as I was able. The bike starts up not I think that the rotation direction is not correct. Thank you -- Edited by al...
Hello all... I picked up a '99 TTR250 a few days ago, through a trade and have yet to ride it.. It sat in a barn for about 4-5 years and after some checks, fresh gas and a battery, she fired right up (for a minuite). The carb is leaking so I have it pulled off and I'm waiting for some parts to rebuild it before I t...
Morning all, just thought I would say hello, not strictly a ttr owner, but my other half has one that I ride a fair bit, and do the maintainence on! I will find a picture at some point! Dave
My TTR250 had a flat spot from idle on take off, i thought it had an inlet leak as i couldn't get it to idle smoothly without winding out the mixture screw excessively. I just replaced the inlet manifold o-ring without taking off the carby and it took a while to get it started... in the end some arerostart...
New to the forum thank goodness I found ya'll. I am new to the dirt bike thing son is 4 and is riding a Razor electric dirt bike, getting a gas one for his 5th bday in July. Dad has always wanted one so this was my excuse to purchase my first dirt bike. I know very litte about these bikes, it ran strong no issues o...
The challenge with tax discs on dirt bikes is to make them last a year without turning to pulp what with all the water they have to endure from rain, ford crossings, power washing, etc. The system I have used for many years with great success is to attach then to the LH ("nearside" as required b...
Hello,
As I've mentioned before I've got an after market head light, there is a bolt hole at the bottom but no bracket to bolt it too, would be okay for mot reason to cable tie to bottom yolk as security and use locking bolts to secure the head light to the bracket on the forks.
Lowered seat for sale as shown below. This was on the bike when I bought it but I have just bought a standard seat as this is too low for me! It has one small knick on the top and another larger on one of the rear corners but both have been covered with gaffa without any problems. £35 posted to mainland UK, or p...
You learn something new every day and, on this occasion, it's a very helpful tip from Brindabella The Search facility in ActiveBoard (generally - not just on this forum) is pretty naff. It is better to use Google and specify that you want the search on this forum e.g. put this into the Google search bar...
New to the forum, i've got a 2000 ttr250 with a baja kit on it. Love the bike, i've had it about ten years now. Have a question about the tail light. My tail light has stopped working when the head light is on. Does the tail light and head light run off the same wire? Brake light works just not runnig light. It'...
Hello all I'm JP, a rapidly ageing 34 y/o tinkering fan. I bought my white open enduro bike 4 years ago. It was in a bit of a state, i wish i'd have taken some 'before' photos. its a 1996 import that was used off road for the first few years of its life. I'm well on with the referb, tank is at the bodyshop gett...
were off to Skegness next weekend to the MCN weekend is anyone else going and does anyone know any good trails around Skegness, not too technical seing as i had an altercation with a large boulder last time out and im not long off the crutches.
Hi All, does anyone know what alternative filter I can buy to fit the TTR the TTR filter isn't listed where I was wanting to buy one EG: will a YZ250 filter replace the TTR filter Here is a list of filters from Torpedo 7 in Aus, I have a voucher to use and it expires soon Thanks - - - - - - - - - - ...
Had an awesome ride at toolangi (Victoria Australia). There were alot of riders out and about on all the tracks, but due to the large area it was far between encounters. Tracks were a wide mix of deep boggy mud pits, steep slippery clay descents right through to dry and rocky. Toolangi truly has a wide mi...
It's a pretty simple operation. Just follow this step by step pictorial guide.Tools needed:- wheel-nut spanner (24mm), socket set, hammer and drift.Part needed: Yamaha part number: 10-4GY-22151-00-00 : SEAL, GUARD or an after-market item available here Clear a space and get the bike up on a stan...
hey i fitted a new set of front brake pads but now i feel like they are a two tight fit. i did grees the caliper pistons but feel lyk thy are not very responsive to go back in. any ideas whats the reason?
During my resto the top yoke nut has gone awol. Probably weighs about 1kg at the bottom of the platers tank all my fittings went to. Anyone got a spare? Part no is 90179-24542 and is number 8 on the exploded diagram. Cheers FS.
Hello all. I just joined this forum though I have been referring to ttr250.com for advice all the time. I bought my 96 TTR OE on February 2010, it is also my first bike. As my riding developed I wanted to sell it to upgrade but then couldn't get myself to let it go. After riding it for longer time I decided th...
Hello out there, Like to introduce myself. Had several Enduro models varying from 250 to 600cc. All of them four-stroke except for one, namely a KTM 250. I'm not so keen on watercooled engines and pistons that have, nearly, the same servicelife as for twostroke. Before i owned a TT350, was a nice mach...
