A forum for owners of Yamaha TTR250 trail and enduro bikes!

First UK Reg 2000. Approx year of manufacture 1993. MOT until Aug. 2016. Very good condition. 6,500 miles thought to be original. Used for green lane runs. Korba link and bearings. Overhauled rear shock and service. 30 inch seat height. Recent chain and sockets. New brake pads. Steel tank. OK tyres...

If you spend a bit of time in the workshop then you might find some of Matt's vids and blogs interesting. See hereHe covers a wide range from rebuilding a shock to repairing workshop tools.TTR

Starter motor is from a blown motor TTR i got so it couldnt be tested. Teeth are worn bad on one side. Would this still work ok . Havnt pulled apart motor any further as yet to see if other cogs are worn also. Thnx. -- Edited by Markvan on Sunday 6th of December 2015 01:33:29 AM

Hi I have torn for gaitors and I would like to replace for purple ones but can't use mine for mesurnents and not intact does anyone know what suse I need

surely there must be someone out there has a cheap grab rail for me come on pals look in your box of parts johnboy

Hullo all. I realise this is the reverse to the usual 'upgrade', but does anyone know what the rating of standard weight fork springs is? I've got heavier ones fitted, and as I get older and thus even slower, I need to go back to standard. I'll also be working in some rocky country next year, so plush is ver...

Thought I'd post a few pics from this years VINCE pyrenean orientiering event. Sorry if some are the wrong way up! An excellent 2 days in the mountains of Catalan Spain following routes to waypoints laid out by Mr Austin Vince himself. Superb fun, if exhausting, in a noncompetitive (sometimes!) atmo...

Hi has anyone got a lowering link for sale please? I have just put a deposit down on a TTR and will need to fit one before I can feel confident off road. Thanks Jak

Hi I'm looking foe a white metal tank don't mind a few scratches but no dents. Hope someone can help x

Bought about 6 months ago with a view to doing some trail riding, the reality is that it's not going to get used and I'd rather it go to someone who is going to get some benefit out of it rather than have it sit going rusty. I'm no motorcycle mechanic but it seems in good nick apart from needing a fork oil seal...

https://www.gumtree.com/p/yamaha-motorbikes/yamaha-ttr250-raid/1144642060

I have all the parts ,used. lever , side cover if needed , off a blue model TTR. my idea is to swap for a standard ttr oil cooler but im not sure if they are same value. Located Tweed heads Australia. also not sure of a fair price to sell the kick start /kit /parts. -- Edited by Markvan on Sunday 6th of March 20...

Hi guys. So when I brought my ttr is has the oko 34mm flat side fitted, when I brought the bike it was perfecr around 40 miles into the ride home the bike started to run away with its self and idle fast at traffic lights , I made it home none the less, I put the bike away in the back cornor of my garage and a week...

still on the lookout for a used grabrail please

I thought i made a tool but was thinking as i tried to loosen the nut should i have tried harder and made a better tool. Well snap goes the stud. Its on a TTR motor thats being wrecked but i still dont like breaking anything. I seen the photos of other home made basket removers , but guess i was to lazy to try and...

Just picking up on the previous message. Is there any anyone on here who lives near Tipperary? my brother in law lives near Galbally and the Galtee mountains. I went over there with my bike about five years ago - had a brilliant time in Bansha , Aherlow. Lots of open trails and woods. Some local lads too...

Hi I have a Chinesse master cylinder fitted to my bike and it's a bit **** however I have a Yamaha r6 master cylinder and leaver in my garage my question is. Will it be okay to use on the ttr? Or will it have to high of pressure many thanks

Hi all - after trawling the website the last few weeks, my TTR is finally on it's way to me (and hopefully it will arrive safely tomorrow sometime). To say I am excited is completely understating it. The bike is pretty much stock form from what I can see - tail tidy will probably be my first mod, and I wil...

Hi after my post yesterday I found the problem wasn't the spragg clutch it was the woodruff key was snapped is this a common problem? Does anyone know the size?? I tried buying from ttr shop but can't pay by debit card and they seem a bit pricey

Does anybody know if the standard linkage seals fit into the kouba link? Seals have fallen apart and need replacing

hi guys i though i would say high as new to the yamahaa ttr i brought a 1993 open enduro lastweekend and loved the 70 mile ride home!!

hi, had a bit of a problem with my ttr today, only the second time i have ridden it after a hour of getting out the garage as evryone i share with parked like a a**h**e, the guy i brought the bike from had been using it evryday so i wasnt suprised it had a flat battry after a week, not a problem i thought so u...

just a couple of pics from a 20 min ride today, taken just before I fell off , "bugga",only my pride was dented

i have a freind selling supermoto wheels on ttr hubs easy conversion for someone also have complete bike for breaking.

Came across this photo. I can't recall seeing a headlight like this on a TTR

Here is my 1993 TTR250 for sale. It is the ideal winter bike or green laner. Good points: Full 12 months MOT – fully road legalNew oil valve stem seals and new piston rings just fittedLower suspension linkages just fitted with new bushes/bearings/seals etc.New sprag starter clutch fitted last y...

if anyone is interested