I contacted All Balls about the grease they use in their bearings and their response was:From: Tech
Sent: Monday, February 29, 2016 3:53 PM
To: Helen Turner
Subject: Re: Contact Form
Our bearings use Chevron SRI Grease NLGI 2. I am not sure it is compatible with Redline CV-2 grease. I looked up t...
Fitting a replacement bump stop can only be done after removing the shock absorber from the TTR. Clean the shock absorber as best you can to make it easier/nicer to work on. The first thing to be done to get at the bump stop is to remove the spring. I don't think there is any alternative to compressing the s...
Runs fine, no ignition switch, steering lock broken, wiring repairs needed, will need new back tyre, chain and sprockets, numberplate and mounting, 14k mls, FMF power core pipe, Totally TTrs bash plate and case saver, will probably need a new headlamp unit and brake pads front and rear, left hand gu...
A nice ride along the old track from Kitries on the coast up to Doloi village......old Byzantine Church visible above......its dry weather here so I still haven't managed to assess the new Michelin T63s.....confidence inspiring on dry roads & so far very good off-road on rocks, gravel and dirt...
Went out for the day with some friends from the FB group I belong to "Blue mountains Adventure Riders" on Facebook Unfortunately my GoPro was playing up so snapped a few shots with the phone Went to Kanangra Walls, Jenolan Caves, through the bush to Oberon and back again Endless bush and tra...
Could the rear chain slider be lowered enough for this sprocket to fit a TTR. One of the comments on the facebook page said they used the same internal gears on the 250 as in the 125 which this bike is.
Bjr, nouveau sur le forum, j'ai fait le rallye raid des Pionniers 2015 en France 6 jours - 200 km. J'ai du adapter ma monture à l'épreuve ...transformation personnelle avec mon copain Noel super préparateur... Quelqu'un a t il fait un raid au road book + trip avec un 250 TTR?? pour info : http://rally...
A new video of the TTR in action, trying a new camera position on a new helmet, this is on a "dry weather rd" in the Adelaide hills Best in HD, if you think it's ok please like share or subscribe cheers Terry
Hi All am i to tall for a TTR250 as on one of the motorbike forums a man has commented saying i am to tall at 5ft 11.5'' inches to be exact, 32 to 33'' inch leg length comments please thank you
Hi everyone. Lots of great info on this site. I'm curious what you value a used 2000 TTR 250 at in the US. Here's the bike info that I have. I bought it a few months ago from the original owner who lives a few miles from me here in Arizona. According to him and his son, the guy broke his foot pretty bad riding it s...
Hi All i will SOON have my 1st TTR, Thank you all for your advice on the bike, i could do with a few pointers in what clothing to buy i.e make or name of clothing or perhaps you have something you could sell to me that you don't fit into anymore HA HA, Again thanks for your help, my location is Plymouth Phil.
This weekend I've begun swapping my good parts to bike #2. So I far I've done the carb and airbox, I did the rear wheel and brake pads today and it's also gotten a new chain and sprockets. I also rigged up the new headlight plastic provided by the PO and managed to get a quick ride in last night. After lunch, I...
ive taken monday off to make it a four day weekend and the ttrs heading out bush tomorrow check the tires fill up with fuel and see where I end up -- Edited by ttboof on Thursday 28th of January 2016 12:09:30 PM
I don't mean to swear at you all on hear YZF 250 has been offered to me, as i can't find the right TTR 250 for me and really want to get out there and ride comments please, as i haven't got a clue how this bike is for green laneing or even on the road sorry if this offends anyone thank you
Hi all. I am a proud owner of a 93 open enduro and I am loving it. I originally bought the bike for my wife to learn to ride on but it was too tall for her and she could not hold it up when she had to lean over to touch the ground. It then spent a few years in the shed without getting much use, I am a trials rider and d...
just looking round my sons ktm & found 18 teeth missing from rear sprocket & 1 missing front they all looked ok when i adjusted & lubricated the chain prior to him using it i have never seen so many teeth missing i have just removed the chain no tight spots must be a stone that caused it or has...
Chasing side panels 2nd hand and kickstart lever ( have heard XR250's have a usable lever ) , prefer in AU to suit 2008 complianced TT-R 250. Or info on what other kick levers would fit EG WR250 XR250 etc etc
A friend (non ttr) and me are of to Ireland in the morning To go for 2 days of trail riding with a fellow ttr rider (comeragh) on this here forum, he has been kind enough to invite us out to the emerald shores, for some gaelic shenanigans. Some last minute fettling with the bike and she was good to go Loaded...
hi folks after waiting for a while to get (as top gear would say) a reasonably priced set of 22mm risers I fitted them with my reasonably new Renthal bars only to find on full left lock I am pulling the throttle cables and moving the carb....which is not good. So I pulled off the seat and tank only to find the...
Nothing unusual cropped up in this restoration so I haven't posted about it before. It's another frame-up rebuild starting with a shot blasted and powder coated frame. It's got a US silencer on it which has quite a deep throated note but is not offensively loud
The notorious stock Allen head bolts are known to be a PITA and strip easily. An excellent and easy replacement is the bolts that connect the fuel tank main bracket to the fuel tank (blue/plastic). They are exactly the same size, have a normal 8mm hex head, and have the same coating on them (phosphate?)...
I live in a really scenic area, 9 miles from my house is a place called Loch Doon, there is a nice drive/ride up from Stration up the forest drive and in to Loch Doon, 8 miles of forestry roads then on to proper tarmac through the Loch, only manage to take a few pictures today. [URL=http://smg.photobucke...
One of the comments on the facebook page said they used the same internal gears on the 250 as in the 125 which this bike is. 
http://www.bbc.co.uk/news/world-35682191 Do we now have to chose a new avatar? Martyn