A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Easy to up shift, hard to downshift while engine is running
Post Info TOPIC: Easy to up shift, hard to downshift while engine is running
TTRVN


Veteran Member

Status: Offline
Posts: 33
Date:
Easy to up shift, hard to downshift while engine is running
Permalink  
 

Hello guys.

Lately it has been very difficult to downshift on my Raid. Upshifting is easy and smooth. However when i try to down shift, the lever just sticks there, and i have to step very hard on it to change the gear. This only happens when the engine is running.

At 1st gear, even when I pull the clutch all the way in, there is still some torque being transferred, and I have to apply a little brake to stop the bike from moving.

I changed friction plates, to no avail. Push lever is still properly aligned. I love my old ttr, and would hate to see its gearbox explode. Any ideas?

 

Thanks.



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

A few possibilities I can think of:

1. Regarding the gear change, down shift, it could be that the torsion springs are weak - replacements are available see here

2. The post that the large torsion spring works against is loose in its mounting. With hard gear changes the post can actually break the casing - see photo below of repair.

Crankcases2.jpg

3. If the push lever is properly aligned and you have slack on the cable then it is possible your clutch basket "fingers" are grooved making the plates stick and not release properly. The fingers as shown in the photo below would be noticeably notched.

7-plate clutch basket 4a.jpg

 

Some info here.

Brian

 



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Easy to up shift, hard to downshift while engine is running


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard