A forum for owners of Yamaha TTR250 trail and enduro bikes!

threshold · threshold

Does anyone have brackets for a xr tank to a open enduro for sale or detailed pics on how to make them? Cheers Glen

TTRfan · TTRfan

Most of us use our TTRs for trail. track or road and therefore the requirements are very different to those of a race-tuned engine. I have been contacted by a kart racer who is using a TTR250 donk in his kart and has asked about tuning it to the max. This was my reply:Regarding the carb, the standard TTR car...

Dan-in-a-Van · Dan-in-a-Van

http://www.ebay.co.uk/itm/12V-20000mAh-Mini-Car-Jump-Starter-Booster-Charger-Batt...

DanNZ · DanNZ

I was wondering if its that hard to put the blue plastics onto my open enduro and my ones on my ttr are really scratched and cracked. And also this might be a long shot but what does it take to fit the blue tank on to the Open Enduro Thanks, Dan

rdchair · rdchair

While stuck in a pond the other day it became apparent I needed a front grab rail? What has anyone fitted?

aussiedeuce · aussiedeuce

Hey has anyone modified the crank case breather so it doesn't flow into airbox?

TTRfan · TTRfan

In sunny weather (yes, we have had some in the UK!) it can be difficult to see if the neutral light is on so I have just changed the bulb for an LED one and it has made a huge difference! The TTR uses a capless bulb and it wasn't difficult to find an LED version: Before: After: Bright eh? Nice easy job Bria...

TerryK · TerryK

I have been asked several times what mirrors I'm using on my TTR & WRR, I've been using this style since 1982 & so far only broken one. Anyhow page 17 of the MCS catalog 3" clamp on enduro http://mcsonline.com.au/Catologue/ch_3.pdf And a photo of the page in question, not sure how you will go ge...

Kiwioshka · Kiwioshka

Had this plastic air-scoop lying around for ages - took it off the quad as it was just another place for mud to collect (plastic behind it was not cut). 2 zip ties later I have a screen Works well, will upgrade to stronger zip ties just in case.

rdchair · rdchair

Anyone tried one of these? for a tenner Ill try one unless someone has already tried? LINK REMOVED SORRY! GO TO AMAZON AND PASTE TEXT INTO SEARCH cheers Spark Plugs Engine Digital Tach Hour Meter Tachometer Gauge Motorcycle ATV -- Edited by rdchair on Tuesday 19th of December 2017 09:56:45 AM

DanNZ · DanNZ

Greetings from New Zealand! Ok this is really confusing but does anyone know if any of the 1993 TTR-250 OPEN ENDURO model came with the Raid motor with the kickstart, oil cooler etc. My bike has these and I'm not too sure if its had them fitted or its from factory or if its even had an engine swap! Any reply...

TTR250RIDER · TTR250RIDER

Just recently I took the decals off of my fuel tank and a couple days after out of nowhere it cracked and leaks gas. I am not looking to upgrade the tank size just maybe a different tank that looks more sleek maybe if a yz tank will fit id be happy I want one that looks better or where to get a stock one i am lookin...

sledman 1 · sledman 1

My newy aquired 2005 TTR 250 is being turned into my version of a MONTANA Overlanding Machine as I have seen this term for riding in the backcounty roads on posts. 1. I have lowered quite a few bikes for myself and customers to make a more comfortable ride height in rough terrain, to help folks chall...

Phlip7 · Phlip7

I've done a search and can't see anything close to what I want to do so has anyone removed this ugly black number plate holder on the later model blue TTR's and replaced it with a bracket of some kind so that the plate sits right up under the tip of the blue guard itself with a tiny light on top.

JCW · JCW

I have owned a lot of bikes through my 45 years of riding, but I have never seen one go up in RPMs so fast after 50 mph. I don't have a tach on it, but the bike feels like it's about 2500 rpms at 50 mph, and 5000 rpms at 60 mph. Why would there be that much difference? I have ordered a 48 rear sprocket and hopef...

JCW · JCW

I rode my new to me TTR250 yesterday after riding my crf450x and I noticed it felt really cramped on the TTR. After checking, the footpegs on the TTR are at least 3-4" higher than the bottom of the bike. Is that normal, or did someone short put these on?

DANKWHEELIE420 · DANKWHEELIE420

OK IMA JUST SPIT IT IM THINKING ABOUT INJECTING NITROUS INTO THE TTR I BELIVE THIS BIKE WAS EAGERLY BUILT BY YAMAHA FOR THIS EXACT REASON THEIR ARE 2 PORTS YOU CAN CLEARLY INJECT SOMETHING INTO THIS PIG AND THATS ON THE RIGHT SIDE OF THE CARB AND THE TOP OF THE SECOND INTAKE PIPE WHERE THE SMOG BULL**** IS IM...

Kaos · Kaos

Does anyone know of a quick action throttle for the TTR? I had a Motion Pro on my WR but it doesnt work on the TTR.

purdoy25 · purdoy25

Hello. I acquired my TTR 2 months ago, and have been wondering what this shim is for? Is this a big bore kit any of you are familiar with? No engine problems so far. Just curious as I know this bike has been heavily modded and the previous owner also has no idea. Dunno how many hands she's been passed to. :ha...

Keith89 · Keith89

Okay I have done my conversion I'm happy with it but for those who want to do it cheaper Yamaha yzf 125r wheels are exsactly the same as Dt supermoto wheels but they are lighter and much more readily available for less money you would still need to make caliper extension bracket for the front hope this hel...

69chris · 69chris

has anyone cut open a standard exhaust and modified it to liberate a bit more flow ?have chopped the bit off the front pipe, just wondered if there was anything to gain by messing with the rear exhausti know most would just bolt on an aftermarket system, but, if your like me with more free time than spare c...

Bear foot bowhunter · Bear foot bowhunter

Hi guys , just wondering I if any of you have done this Iv been playing with the idea of motarding my ttr for on road handeling an to Lower seat hight , but dont want to lose all the off road capability , so whrn looking around I found a couple of ideas , first was change the rims to a 19"-17" configuration whic...

diggermanbob · diggermanbob

Ugly stick where the chain guard used to be

Fladdem · Fladdem

Long story short, my 1993 TTR 250 had sprung an oil leak, it was oozing for ages, then suddenly something must have given way because I got home from a ride and oil was pouring from around the base gasket. I proceeded to order a head and base gasket set. While changing the gaskets, I noticed the piston was r...

FBRConcepts · FBRConcepts

Hey guys, I was fitting a set of footpegs from my yz250 on my father's ttr250, did the left side with minor machining of the peg pivot tube and it fit perfect, went to the right side to discover the peg was completely oddball designed and would be too far forward and out of I used a regular peg. I a lot of pe...

FBRConcepts · FBRConcepts

Hey guys and gals, I am setting up the rear suspension after replacing all of the bearings for it and i lost my manual download from a tablet reset and am waiting on Totally TTR to send a revised download link, in the interim, does anyone have a manual handy that can tell me the rear shock spring min and max...

DANKWHEELIE420 · DANKWHEELIE420

THIS IS A WORKING PROTOTYPE BUT ITS NEVER FAILED IT HAS THE GAINS OF A YOSHI + MORE IT HAS THE REMOVEABLE BAFFEL THIS IS MY IDEA FOR THIS BIKE ITS CRAZY BUT MAYBE LEGAL??? HERES PICS

One1 · One1

The faq said yz plastics fit but i dont see any year that will fit my 04. Are there any side plate options that will fit the side size properly with light modification to the mounts Perhaps?

Vormoto · Vormoto

Hi guys. Anyone thought about fitting a WR motor into a ttr frame? Besides he engine mountings and radiator position, it might just work? The thought crossed my mind as I saw a wrecked WR 250 with low km on it. You thoughts???

TTRfan · TTRfan

For owners of blue TTRs, a simple upgrade is to fit footpegs from the older white model. The blue pegs are 30mm wide and the white ones are 37/38mm wide. The wider ones fit straight in Hope that helps someone. I have not been able to source a sensibly priced set of after-market wide pegs Brian

Topic		Started By	Replies	Views	Last Post
	Fitting kit to fit an Acerbis tank to an Open Enduro metal-tank TTR ( 1 2 ) (Preview) Does anyone have brackets for a xr tank to a open enduro for sale or detailed pics on how to make them? Cheers Glen	threshold	74	20300	Mar 7, 2018 by ttr steve
	Race tuning a TTR250 engine (Preview) Most of us use our TTRs for trail. track or road and therefore the requirements are very different to those of a race-tuned engine. I have been contacted by a kart racer who is using a TTR250 donk in his kart and has asked about tuning it to the max. This was my reply:Regarding the carb, the standard TTR car...	TTRfan	4	3958	Mar 1, 2018 by Kaos
	Jump Starter Mod (Preview) http://www.ebay.co.uk/itm/12V-20000mAh-Mini-Car-Jump-Starter-Booster-Charger-Batt...	Dan-in-a-Van	0	1340	Feb 18, 2018 by Dan-in-a-Van
	How hard is it to put the later model blue plastics on my Open Enduro? (Preview) I was wondering if its that hard to put the blue plastics onto my open enduro and my ones on my ttr are really scratched and cracked. And also this might be a long shot but what does it take to fit the blue tank on to the Open Enduro Thanks, Dan	DanNZ	3	1388	Jan 24, 2018 by TTRfan
	Front grab rail (Preview) While stuck in a pond the other day it became apparent I needed a front grab rail? What has anyone fitted?	rdchair	3	1129	Jan 17, 2018 by skyrider
	pcv? crank case breather? (Preview) Hey has anyone modified the crank case breather so it doesn't flow into airbox?	aussiedeuce	17	2923	Jan 6, 2018 by DANKWHEELIE420
	Upgrading the neutral light - and other LED bulb and lighting information (Preview) In sunny weather (yes, we have had some in the UK!) it can be difficult to see if the neutral light is on so I have just changed the bulb for an LED one and it has made a huge difference! The TTR uses a capless bulb and it wasn't difficult to find an LED version: Before: After: Bright eh? Nice easy job Bria...	TTRfan	15	7614	Jan 6, 2018 by mossproof
	3"ENDURO MIRRORS (Preview) I have been asked several times what mirrors I'm using on my TTR & WRR, I've been using this style since 1982 & so far only broken one. Anyhow page 17 of the MCS catalog 3" clamp on enduro http://mcsonline.com.au/Catologue/ch_3.pdf And a photo of the page in question, not sure how you will go ge...	TerryK	3	2861	Jan 2, 2018 by TerryK
	Raid screen from quad bike plastics (Preview) Had this plastic air-scoop lying around for ages - took it off the quad as it was just another place for mud to collect (plastic behind it was not cut). 2 zip ties later I have a screen Works well, will upgrade to stronger zip ties just in case.	Kiwioshka	1	1239	Dec 31, 2017 by pricey
	Tacho/hour meter from amazon £9.99 (Preview) Anyone tried one of these? for a tenner Ill try one unless someone has already tried? LINK REMOVED SORRY! GO TO AMAZON AND PASTE TEXT INTO SEARCH cheers Spark Plugs Engine Digital Tach Hour Meter Tachometer Gauge Motorcycle ATV -- Edited by rdchair on Tuesday 19th of December 2017 09:56:45 AM	rdchair	21	1232	Dec 30, 2017 by honda15i
	I NEED HELP! 1993 TTR250 Open Enduro with Raid motor? (Preview) Greetings from New Zealand! Ok this is really confusing but does anyone know if any of the 1993 TTR-250 OPEN ENDURO model came with the Raid motor with the kickstart, oil cooler etc. My bike has these and I'm not too sure if its had them fitted or its from factory or if its even had an engine swap! Any reply...	DanNZ	5	1115	Dec 24, 2017 by Cubber
	Fuel Tank Options? (Preview) Just recently I took the decals off of my fuel tank and a couple days after out of nowhere it cracked and leaks gas. I am not looking to upgrade the tank size just maybe a different tank that looks more sleek maybe if a yz tank will fit id be happy I want one that looks better or where to get a stock one i am lookin...	TTR250RIDER	4	4063	Dec 2, 2017 by TerryK
	3" LOWERING PROJECT (Preview) My newy aquired 2005 TTR 250 is being turned into my version of a MONTANA Overlanding Machine as I have seen this term for riding in the backcounty roads on posts. 1. I have lowered quite a few bikes for myself and customers to make a more comfortable ride height in rough terrain, to help folks chall...	sledman 1	0	1369	Nov 19, 2017 by sledman 1
	Moving number plate. (Preview) I've done a search and can't see anything close to what I want to do so has anyone removed this ugly black number plate holder on the later model blue TTR's and replaced it with a bracket of some kind so that the plate sits right up under the tip of the blue guard itself with a tiny light on top.	Phlip7	10	2375	Nov 12, 2017 by Phlip7
	RPMs go up REALLY REALLY fast after 50-55 mph (Preview) I have owned a lot of bikes through my 45 years of riding, but I have never seen one go up in RPMs so fast after 50 mph. I don't have a tach on it, but the bike feels like it's about 2500 rpms at 50 mph, and 5000 rpms at 60 mph. Why would there be that much difference? I have ordered a 48 rear sprocket and hopef...	JCW	17	1210	Nov 6, 2017 by mossproof
	Foot pegs are really high on my TTR250??? (Preview) I rode my new to me TTR250 yesterday after riding my crf450x and I noticed it felt really cramped on the TTR. After checking, the footpegs on the TTR are at least 3-4" higher than the bottom of the bike. Is that normal, or did someone short put these on?	JCW	1	955	Oct 30, 2017 by TTRfan
	TRULY MENTAL (NITROUS INJECTION) (Preview) OK IMA JUST SPIT IT IM THINKING ABOUT INJECTING NITROUS INTO THE TTR I BELIVE THIS BIKE WAS EAGERLY BUILT BY YAMAHA FOR THIS EXACT REASON THEIR ARE 2 PORTS YOU CAN CLEARLY INJECT SOMETHING INTO THIS PIG AND THATS ON THE RIGHT SIDE OF THE CARB AND THE TOP OF THE SECOND INTAKE PIPE WHERE THE SMOG BULL**** IS IM...	DANKWHEELIE420	4	2568	Oct 27, 2017 by DANKWHEELIE420
	Quick Action Throttle (Preview) Does anyone know of a quick action throttle for the TTR? I had a Motion Pro on my WR but it doesnt work on the TTR.	Kaos	0	779	Oct 5, 2017 by Kaos
	There's a shim under my engine block. What is this? shim big bore bore kit confused engine bore (Preview) Hello. I acquired my TTR 2 months ago, and have been wondering what this shim is for? Is this a big bore kit any of you are familiar with? No engine problems so far. Just curious as I know this bike has been heavily modded and the previous owner also has no idea. Dunno how many hands she's been passed to. :ha...	purdoy25	12	1703	Sep 28, 2017 by purdoy25
	Supermoto conversion new option. (Preview) Okay I have done my conversion I'm happy with it but for those who want to do it cheaper Yamaha yzf 125r wheels are exsactly the same as Dt supermoto wheels but they are lighter and much more readily available for less money you would still need to make caliper extension bracket for the front hope this hel...	Keith89	7	3140	Aug 5, 2017 by danpass15
	rear exhaust ? (Preview) has anyone cut open a standard exhaust and modified it to liberate a bit more flow ?have chopped the bit off the front pipe, just wondered if there was anything to gain by messing with the rear exhausti know most would just bolt on an aftermarket system, but, if your like me with more free time than spare c...	69chris	3	1989	Jul 19, 2017 by honda15i
	Playing with hair brain ideas 😁 (Preview) Hi guys , just wondering I if any of you have done this Iv been playing with the idea of motarding my ttr for on road handeling an to Lower seat hight , but dont want to lose all the off road capability , so whrn looking around I found a couple of ideas , first was change the rims to a 19"-17" configuration whic...	Bear foot bowhunter	11	2077	Jul 13, 2017 by threshold
	Made myself an ugly stick and attached it to the bike (Preview) Ugly stick where the chain guard used to be	diggermanbob	2	1767	Jul 9, 2017 by diggermanbob
	XT 350 Top End (Preview) Long story short, my 1993 TTR 250 had sprung an oil leak, it was oozing for ages, then suddenly something must have given way because I got home from a ride and oil was pouring from around the base gasket. I proceeded to order a head and base gasket set. While changing the gaskets, I noticed the piston was r...	Fladdem	9	3927	Jul 9, 2017 by FBRConcepts
	Oddball footpeg on right side of bike? (Preview) Hey guys, I was fitting a set of footpegs from my yz250 on my father's ttr250, did the left side with minor machining of the peg pivot tube and it fit perfect, went to the right side to discover the peg was completely oddball designed and would be too far forward and out of I used a regular peg. I a lot of pe...	FBRConcepts	0	1323	Jul 4, 2017 by FBRConcepts
	rear shock spring preload range (Preview) Hey guys and gals, I am setting up the rear suspension after replacing all of the bearings for it and i lost my manual download from a tablet reset and am waiting on Totally TTR to send a revised download link, in the interim, does anyone have a manual handy that can tell me the rear shock spring min and max...	FBRConcepts	5	2062	Jul 1, 2017 by ttboof
	AWSOME HOMEADE EXAUST PIPE (Preview) THIS IS A WORKING PROTOTYPE BUT ITS NEVER FAILED IT HAS THE GAINS OF A YOSHI + MORE IT HAS THE REMOVEABLE BAFFEL THIS IS MY IDEA FOR THIS BIKE ITS CRAZY BUT MAYBE LEGAL??? HERES PICS	DANKWHEELIE420	2	1383	Jun 29, 2017 by DANKWHEELIE420
	Plastics question (Preview) The faq said yz plastics fit but i dont see any year that will fit my 04. Are there any side plate options that will fit the side size properly with light modification to the mounts Perhaps?	One1	6	4485	Jun 22, 2017 by FBRConcepts
	WR250/450 Motor in Ttr frame (Preview) Hi guys. Anyone thought about fitting a WR motor into a ttr frame? Besides he engine mountings and radiator position, it might just work? The thought crossed my mind as I saw a wrecked WR 250 with low km on it. You thoughts???	Vormoto	6	2203	Jun 22, 2017 by Vormoto
	Wider footpegs? (Preview) For owners of blue TTRs, a simple upgrade is to fit footpegs from the older white model. The blue pegs are 30mm wide and the white ones are 37/38mm wide. The wider ones fit straight in Hope that helps someone. I have not been able to source a sensibly priced set of after-market wide pegs Brian	TTRfan	34	9234	Jun 21, 2017 by FBRConcepts
«First < 1 … 4 5 6 7 8 … 14 > Last» \| Page of 14 sorted by