WHAT YOU NEED IS A 2IN INTO A 45 1 .25 IN DRILL BIT
3 SELF TAPPING SCREWS STOCK BAFFLE AND A 2 IN HOSE OR EXAUST CLAMP
CUT THE TOP IN HALF USING A SAWSALL AND FASHION A CLAMP AND A SEAL
AND TIGHTEN FOR MOUNTING WILL HAVE FURTHER DETAILS ON THAT IT SOUNDS
GOOOOOOOOOD THE STOCK BAFFLE WORKS GREAT AND ITS REMOVEABLE
SO IT CAN BE A OPEN HEADERD 450 THE BAFFLE SLIPS IN THE END AND FITS TIGHT
IF YOU HAVE THE STOCK BOLT USE IT OR IF NOT TAKE A SELF TAPPING SCREW AND RUN
IT THROUGH THE HOLE OF THE STOCK ONES EVERYTHING IS IN TACT THE BAFFLE QUIETS
IT DOWN A LITTLE BUT FOR MORE QUIET A .25 IN DRILL BIT WILL BE YOUR BEST FREIND ON
THE TOP OF THE BAFFLE DRILL 3 HOLES IN A TRIANGLE AROUND THE BAFFLE AND THEN TAKE
MUFFLER PACKING AND WRAP THE INSIDE BETWEEN THE TWO STOPPERS LEAVE THE BUGLE TIP!!!!
DRILL 3 Q IN HOLES BETWEEN THE RIDGES AND WITH THE BUGLE TIP FACING TOWARD YOURSELF DRILL
3 MORE HOLES ON THE OTHER SIDE OF THE SECOND RIDGE DRILL HOLES DOWN THE TUBE TO IF YOU WANT
MORE IDLE PUT PUT PUT NOISE AND THIS MOD IS A LITTLE TOO LOUD BUT MANAGABLE WITH THE
(US. HEADER) DO NOT USE WITH THE AFTERMARKET HEADER!!! DO NOT CHOP YOUR OLD EXAUST JUST BUY
THAT PIPE AND CUSTOM FAB IT AND IF U WANT FEEL FREE BUT ONLY IF YOU LIKE IT AND A WELDER WILL BE
YOUR BEST FREIND AND SOME HEAT WRAP AS WELL.
