A forum for owners of Yamaha TTR250 trail and enduro bikes!

pepedog · pepedog

Has anyone got a complete carb( good working order) To fit a 55plate ttr250(4gy) model or know where I can get one???

spud351 · spud351

During my resto the top yoke nut has gone awol. Probably weighs about 1kg at the bottom of the platers tank all my fittings went to. Anyone got a spare? Part no is 90179-24542 and is number 8 on the exploded diagram. Cheers FS.

turps · turps

Hi, just wondered if anybody had a lowering link they no longer needed and would sell to me. thanks derek.

DD · DD

So the light is for the Raid the big round one (1994) I need the bottom part where the light goes. the part number 11 in the pic. Hope that someone has it... -- Edited by DD on Thursday 29th of March 2012 02:34:06 PM

hertsrider · hertsrider

Hiya, can anyone reccomend which is the best tool bag to fit to the rear of a Raid? Or direct me to a second hand one maybe? Or even better...the orginal one which would have fitted behind the side panel? Cheers

MarkShelley · MarkShelley

Mine came with a lowered seat and I do not need it. Could do a swap if you would like a lower one? Mine is good apart from a couple of split that I have gaffered up.

MarkShelley · MarkShelley

Anybody got a speedo drive knocking about? I have just found that the one on my newly acquired 2003 model has no internals!!

cap83 · cap83

I'm looking for a ttr250 blue plastic petrol tank as I don't want to damage my white metal tank why'll off roading. Does anyone one have one for sale ? Cheers Chris

hertsrider · hertsrider

Morning all..New member to the site here so Hello to you all......I'm seeking a TTR right now and seem to be suffering with an under supply situation! I live near St Albans (Herts) but am willing to travel for the right bike, Seems a lot of TTR's are owned in the S/W (Dev & Cor) funnily enough! I'm hopi...

Sireel · Sireel

Hi, I want to increase the spring rate in my forks a bit to compensate for the addition of a 22l acerbis tank. i figure the neatest way would be to get a factory spacer tube and use a lathe to machine off a couple of 4mm (ish) sections does anyone have a spare spacer or two they can sell me? if so pm me i should be a...

truslack · truslack

Has anyone got the 4-squared lens that goes over the idiot lights? Mine has a very homemade affair that looks ****e, after the previous owner lost the original. Cheers Mark

snailspacejase · snailspacejase

Hi I'm looking for a well used TTR. Can be quite ropey, I like tinkering. Up to a grand. Cheers -- Edited by snailspacejase on Wednesday 15th of February 2012 01:17:05 PM

martinp · martinp

Hi Guys Im looking for a bigger aftermarket fuel tank for my bike. anybody got one lying around?

davecambo · davecambo

i would like a good condition bigger fuel tank. can be non TTR specific as long as mounting brackets will work.

davecambo · davecambo

wanted 52 tooth rear sprocket. new or like new only please. Im in Australia.

dfaz · dfaz

funds are a bit tight so hoping for a second hand sump guard/bash plate its to fit a 2004 ttr -- Edited by dfaz on Sunday 22nd of January 2012 08:21:35 PM

wobbly · wobbly

Hi Im looking for a good used or new petrol cap with pipe for a early ttr250 oe as mine seems to have been repaired in the past and is now falling apart.

spud351 · spud351

Anyone got any side grab rails or whatever they are for a raid spare. Paint doesn't matter, I'll get them powdered, but they must be straight at least. Cheers Spud.

Smokin87 · Smokin87

Hey guys, I'm looking for a fairly new TTR, anything from 2000 onwards. Prefferably with add ons like a luggage rack, a larger tank and things like that, but I'm interested in standard versions too. Cheers, Jack

Chris W · Chris W

I have a 2004 that did not come with the lighting I would need to ride it on the roads here in the USA does any one know if and were I can get it or would it be best to get a baja kit for it Thanks Chris

krisfront1 · krisfront1

wanted lowering link for my son, so he can ride our ttr, we live in australia but intertested any where if the price is right, thanks

Valkman · Valkman

Hi, I'm looking for a very clean and mechanically sound mid 90's RAID to put on the back of my motorhome. Retirement arrives March next year and the wife & I are off touring (and green laning at our great age!

) so I have the winter to source. Best wishes to all...

Dave · Dave

The plastic cap that stops debris getting into the lower suspension bits appears to have disappeared on the right hand side of the rear swing arm... Does anyone have a spare they wish to sell? Cheers.

LRJ · LRJ

Any US members have an air intake duct (snorkel) laying around that you are willing to sell? I discovered that mine is missing (probably removed to increase flow for the after market exhaust). I am hoping that the slight reduction in air intake will help my bike to run a bit better. -- Edited by LRJ on...

BobbyD · BobbyD

Hi all I'm looking for a late model 250 or 325, pref circa 2005 with low-ish mileage. I'm based in Kent. cheers Rob

moglie26 · moglie26

Hi was just wondering if any has a clutch kit or good second hand clutch for my 1993 open enduro for sale many thanks Morgan

LRJ · LRJ

I've just purchased this bike with a Big Gun exhaust system. It is way too loud for me (and probably my neighbors). I would like to buy a stock muffler, as I understand that they are nice and quiet. I am willing to give up a few hp for a little more quiet. I have the stock header pipe, but no muffler. I am in...

eeyore · eeyore

Hi, has anyone out there got a standard silencer for sale? Not sure how this website works, can we pm each other? Any way let me know via this website if you can help and we'll take it from there. Cheers!

LRJ · LRJ

I now have most of the stock muffler (Yamaha 5GF-14711) that I need, but I am still missing the restrictor that fits in the very end of the tail pipe (Images below.) Does anyone have one of these (maybe out of an old, beat-up exhaust system that is no longer usable) that they would be willing to sell me? S...

rogerramjet · rogerramjet

Does anyone happen to have a broken indicator switch unit lying around? Mine works fine but the bloomin little bit of plastic on the end of the tiny indicator stalk disappeared on my last ride. I think it was held in by a minature screw underneath and i guess that vibrated out. I'm selling the bike soon an...

Topic		Started By	Replies	Views	Last Post
	Looking for! (Preview) Has anyone got a complete carb( good working order) To fit a 55plate ttr250(4gy) model or know where I can get one???	pepedog	0	584	Apr 26, 2012 by pepedog
	Top yoke nut (Preview) During my resto the top yoke nut has gone awol. Probably weighs about 1kg at the bottom of the platers tank all my fittings went to. Anyone got a spare? Part no is 90179-24542 and is number 8 on the exploded diagram. Cheers FS.	spud351	3	868	Apr 11, 2012 by TTRfan
	lowering link (Preview) Hi, just wondered if anybody had a lowering link they no longer needed and would sell to me. thanks derek.	turps	0	559	Apr 11, 2012 by turps
	Wanted front light parts. Problem solved. (Preview) So the light is for the Raid the big round one (1994) I need the bottom part where the light goes. the part number 11 in the pic. Hope that someone has it... -- Edited by DD on Thursday 29th of March 2012 02:34:06 PM	DD	4	865	Mar 29, 2012 by DD
	Wanted - Tool bag advice/purchase (Preview) Hiya, can anyone reccomend which is the best tool bag to fit to the rear of a Raid? Or direct me to a second hand one maybe? Or even better...the orginal one which would have fitted behind the side panel? Cheers	hertsrider	15	1531	Mar 26, 2012 by armcosurfer
	Standard height seat for blue bike (Preview) Mine came with a lowered seat and I do not need it. Could do a swap if you would like a lower one? Mine is good apart from a couple of split that I have gaffered up.	MarkShelley	0	496	Mar 22, 2012 by MarkShelley
	Speedo drive wanted (Preview) Anybody got a speedo drive knocking about? I have just found that the one on my newly acquired 2003 model has no internals!!	MarkShelley	3	875	Mar 22, 2012 by TTRfan
	Blue plastic tank wanted (Preview) I'm looking for a ttr250 blue plastic petrol tank as I don't want to damage my white metal tank why'll off roading. Does anyone one have one for sale ? Cheers Chris	cap83	0	510	Mar 21, 2012 by cap83
	Wanted A TTR in S/E England (NOW FOUND :-) ) (Preview) Morning all..New member to the site here so Hello to you all......I'm seeking a TTR right now and seem to be suffering with an under supply situation! I live near St Albans (Herts) but am willing to travel for the right bike, Seems a lot of TTR's are owned in the S/W (Dev & Cor) funnily enough! I'm hopi...	hertsrider	29	7104	Mar 5, 2012 by burton500
	wanted: front shock spring spacer tube/s (Preview) Hi, I want to increase the spring rate in my forks a bit to compensate for the addition of a 22l acerbis tank. i figure the neatest way would be to get a factory spacer tube and use a lathe to machine off a couple of 4mm (ish) sections does anyone have a spare spacer or two they can sell me? if so pm me i should be a...	Sireel	4	1405	Mar 4, 2012 by Sireel
	Dashboard lights lens (Preview) Has anyone got the 4-squared lens that goes over the idiot lights? Mine has a very homemade affair that looks ****e, after the previous owner lost the original. Cheers Mark	truslack	2	1244	Mar 1, 2012 by DD
	Wanted a TTR in the South West. (NOW FOUND) (Preview) Hi I'm looking for a well used TTR. Can be quite ropey, I like tinkering. Up to a grand. Cheers -- Edited by snailspacejase on Wednesday 15th of February 2012 01:17:05 PM	snailspacejase	8	6209	Feb 27, 2012 by sammyttr
	Wanted -- aftermarket fuel tank (Preview) Hi Guys Im looking for a bigger aftermarket fuel tank for my bike. anybody got one lying around?	martinp	4	1147	Feb 24, 2012 by Phil Trueman
	wanted. larger fuel tank. (Preview) i would like a good condition bigger fuel tank. can be non TTR specific as long as mounting brackets will work.	davecambo	1	597	Feb 24, 2012 by Phil Trueman
	52 tooth rear sprocket (Preview) wanted 52 tooth rear sprocket. new or like new only please. Im in Australia.	davecambo	0	738	Feb 18, 2012 by davecambo
	wanted bash plate (Preview) funds are a bit tight so hoping for a second hand sump guard/bash plate its to fit a 2004 ttr -- Edited by dfaz on Sunday 22nd of January 2012 08:21:35 PM	dfaz	8	1609	Feb 3, 2012 by Mickyb
	Undamaged petrol cap (Preview) Hi Im looking for a good used or new petrol cap with pipe for a early ttr250 oe as mine seems to have been repaired in the past and is now falling apart.	wobbly	5	1971	Jan 28, 2012 by wobbly
	Raid side handles (Preview) Anyone got any side grab rails or whatever they are for a raid spare. Paint doesn't matter, I'll get them powdered, but they must be straight at least. Cheers Spud.	spud351	3	684	Jan 27, 2012 by spud351
	Looking for a TTR in Britain (Preview) Hey guys, I'm looking for a fairly new TTR, anything from 2000 onwards. Prefferably with add ons like a luggage rack, a larger tank and things like that, but I'm interested in standard versions too. Cheers, Jack	Smokin87	3	627	Jan 11, 2012 by Brick_Top
	Lighting (Preview) I have a 2004 that did not come with the lighting I would need to ride it on the roads here in the USA does any one know if and were I can get it or would it be best to get a baja kit for it Thanks Chris	Chris W	5	2427	Jan 3, 2012 by Chris W
	lowering link (Preview) wanted lowering link for my son, so he can ride our ttr, we live in australia but intertested any where if the price is right, thanks	krisfront1	2	908	Jan 2, 2012 by krisfront1
	Raid wanted (Preview) Hi, I'm looking for a very clean and mechanically sound mid 90's RAID to put on the back of my motorhome. Retirement arrives March next year and the wife & I are off touring (and green laning at our great age! ) so I have the winter to source. Best wishes to all...	Valkman	4	871	Dec 31, 2011 by ttr raid
	Rear Swing Arm Cap/cover (Preview) The plastic cap that stops debris getting into the lower suspension bits appears to have disappeared on the right hand side of the rear swing arm... Does anyone have a spare they wish to sell? Cheers.	Dave	7	925	Dec 23, 2011 by colin13846
	Wanted: Air Intake Duct--FOUND! (Preview) Any US members have an air intake duct (snorkel) laying around that you are willing to sell? I discovered that mine is missing (probably removed to increase flow for the after market exhaust). I am hoping that the slight reduction in air intake will help my bike to run a bit better. -- Edited by LRJ on...	LRJ	0	2782	Dec 22, 2011 by LRJ
	Wanted: TTR 250 (Preview) Hi all I'm looking for a late model 250 or 325, pref circa 2005 with low-ish mileage. I'm based in Kent. cheers Rob	BobbyD	1	875	Dec 12, 2011 by colin13846
	Clutch (Preview) Hi was just wondering if any has a clutch kit or good second hand clutch for my 1993 open enduro for sale many thanks Morgan	moglie26	8	3969	Nov 30, 2011 by TTRfan
	Wanted: Stock Muffler--FOUND! (Preview) I've just purchased this bike with a Big Gun exhaust system. It is way too loud for me (and probably my neighbors). I would like to buy a stock muffler, as I understand that they are nice and quiet. I am willing to give up a few hp for a little more quiet. I have the stock header pipe, but no muffler. I am in...	LRJ	1	1094	Nov 28, 2011 by LRJ
	Exhaust wanted (Preview) Hi, has anyone out there got a standard silencer for sale? Not sure how this website works, can we pm each other? Any way let me know via this website if you can help and we'll take it from there. Cheers!	eeyore	13	2366	Nov 27, 2011 by Mickyb
	Wanted: Small bit of Stock Muffler--FOUND! (Preview) I now have most of the stock muffler (Yamaha 5GF-14711) that I need, but I am still missing the restrictor that fits in the very end of the tail pipe (Images below.) Does anyone have one of these (maybe out of an old, beat-up exhaust system that is no longer usable) that they would be willing to sell me? S...	LRJ	0	2335	Nov 27, 2011 by LRJ
	Little bit of plastic on end of indicator switch stalk (Preview) Does anyone happen to have a broken indicator switch unit lying around? Mine works fine but the bloomin little bit of plastic on the end of the tiny indicator stalk disappeared on my last ride. I think it was held in by a minature screw underneath and i guess that vibrated out. I'm selling the bike soon an...	rogerramjet	3	639	Nov 17, 2011 by rogerramjet
«First < 1 … 18 19 20 21 > Last» \| Page of 21 sorted by