A forum for owners of Yamaha TTR250 trail and enduro bikes!

dijabringatinny · dijabringatinny

hi all does anyone know the part number for a k&n oil filter to suit a 2011 ttr 250?

Baggers · Baggers

Hi Chaps, Can anybody tell me the purpose of the little bolt, located on the front nearside (Gear change side) corner of the cylinder head just under the cam cover?? The thread has gone on mine and there is an oil leak from it, Can i re-tap and put a larger bolt in or does it serve some special purpose?? I ha...

Baggers · Baggers

Are the threads for the mirrors a non standard size?? I tried to use one of my mates mirrors and it would not fit, I have seen Yamaha Adaptors on ebay, some are to convert from left hand to right hand thread and some are for 8mm-10mm, I am unsure which ones to get, but think it is the left hand thread ones as the...

coey66 · coey66

Hi Does anybody know the paint colour or code for the frame for 2005 model? Just stripped everything for a good clean and have an overwhelming urge to touch frame up!! Nothing bad just a few scuff marks etc Many Thanks Steve

Sprok · Sprok

I'm talking about the two bolts that secure the exhaust to the frame. The OEM bolt (with the horrible hex key head) is apparently 90109-082G0-00 but is marked as obsolete. So what are we suppose to use? The equivalent bolt on the WR250R 95024-10016-00 looks the same except with a normal hex head. Anyon...

TTRfan · TTRfan

A customer reported a problem with the first of a batch of header pipes recently made up. It fouled the frame down tube and wouldn't tighten up against the gasket in the exhaust port. I took the rest of the batch back to the fabricators this morning and they couldn't find a problem as they fitted their jig...

Markvan · Markvan

2007 mod. 20,000 km. done little of road. But abit of beach work. Noticed the rubber perishing and breaking up. Anyone else have this problem.

j180 · j180

Looks like the TTR is coming off the road earlier than expected, in the last couple of days I noticed a bit of oil under the bike, had time to get a proper look today. Looks like the base gasket has perished, not sure if it has been put on correctly as it is hanging out by the edge of the engine by a few mm. Looks l...

BennVenn · BennVenn

Hi everyone, There is some great reading material on here and I've read just about all the posts I could find for info regarding my particular issue but I've found nothing similar to my issues. I'll start with a little history. I've owned my 2000 TTR250 for around 7 years and had it in storage for the last...

TTRfan · TTRfan

There are quite a few Raid owners on here and it would be good to use the collective knowledge to update the table of differences to put in the FAQ. This is what I have so far and corrections, additions, suggestions welcomed! BrianThe tank is larger on the Raid hence if you fill it right up its going to add w...

wizz · wizz

Im looking to get a 110/80 conti. Twinduro. I do 80% road. will I get decent milage from it? Thanks

CUL8TTR · CUL8TTR

I was looking at a spare set of wheels, seller says they're of a 2001 will they be the same as my 2007?

dannydandan · dannydandan

fuel is filling up in the bowl of the carb but wont squirt through the hole in the needle ive cleaned jets alot had carb of 5 times today just cant get fuel to go through carb is there anything i can try ? fuel is getting into bowl ive sprayed carb cleaner through and can see that getting through no problem s...

jackvine · jackvine

Hi Guys OK got to 1993 OE not sure mileage as Im pretty sure the 660km on the speedo is wrong. When cold, if I stick the choke on and try to start the bike, it will fire up then die, now Ive found the way to start it is to keep choke off and twist the throttle a few times to pump some fuel in, do this half a dozen times...

TTRfan · TTRfan

We sometimes get asked by Raid owners about parts on their TTRs that may not be standard. Just found this pic to show what was on offer as extras. 1st pic is the front disc and fork guards. 2nd pic is a plastic rear disc guard. 3rd pic is the kickstart lever and mechanism. 4th pic is the oil cooler option. 5th...

Wuss · Wuss

Hi guys, I just purchased an 04 Ttr250. It hasn't been started for 9 months. When I brought it home thought it might be something simple but it won't start. It it started for a couple seconds once and the died. I have had no luck since. I changed the spark plug, put fresh fuel in, flushed a bit of the old fue...

ben694 · ben694

so as iv heard the exhaust studs are prone to rusting. i acquired my bike over a year ago and have stripped it down resprayed the frame, stripped the engine top to bottom and now its all back together woop ! except when taking the exhaust off, first thing i did was snap one of the exhaust studs off !! argg too...

Oldduc · Oldduc

Just wondering if I can lean the bike on its side and change the clutch plates without losing all the oil? Also is there a gasket needed? I have a 93OE and the manual I have is for later model, which does show a gasket. if necessary I can dump the oil and reuse but if possible would prefer not too. This techni...

Lin · Lin

Can anyone tell me if a 140/80 Metzler Karoo 3 will fit inside the swing arm?

locky · locky

My TTR is standard but i have a new FMF Powercore (with db killer) , it came with the bike. I'm thinking of fitting it and opening up the airbox and fitting jets to suit. Maybe i'll also get the short header pipe. I'll still run it in standard form for the next few months before deciding to do the mods. So,...

j180 · j180

This the second time the dip beam has gone on my TTR OE. What are my best options (the cheaper the better). I would like a more powerful light if it is possible with the standard electrics as I use it all year road. Tbh the original is p#ss poor

tubefactor · tubefactor

Hi all. I bought a new old stock TTR250 from a dealer in the UK back in 2007 and had it delivered to my home in Spain. I think it is a 2006 model year, maybe 2005. I rode the bike for 66 miles and changed the oil and filter and then put it on a lift stand in the garage where it has remained for the last 7 years. I di...

dannydandan · dannydandan

hi just a quick question should my main jet or my pilot jet be fully tightend in carb or should they be unscrewed slightly ....... im a complete novice working on a project bike

jonp · jonp

I bought a used 2006 ttr250. Bike looks like it is is phenomenal condition very little case wear marks engine looks clean, took the tank and seat off and cleaned out the carb all look practically new. Problem I am having is that the bike starts up fine with choke runs great for about 20 minutes then just d...

widge · widge

do you tighten the rear wheel nut up to its specified torque or use a small tool kit spanner to tightening it up in case you need to undo it on the lanes?

locky · locky

http://ttr250.activeboard.com/t59111364/lockys-ttr/?sort=oldestFirst&page=2

yorkie lad 1 · yorkie lad 1

i have a 2005 model,getting more difficult to start,started it tonight but smoked a fair bit on start up. can turn kickstart over dead easy i e by hand suggests lack of compression? bike fine when hot,however went out 2 weeks back with my local trf gang couple of lads said it was smoking a bit? does it requ...

TTRfan · TTRfan

I helped my brother Trev with a couple of jobs on his TTR this morning. Firstly we swapped out his shock for an eBay item that I had tested. My testing is quite simple. The hardest part is taking off the spring to check the damping action i.e. that the rod moves freely and returns to full extension under its...

locky · locky

I have the head and barrel off to repace a few parts, while it's apart i plan on spraying the head and barrel with some heat resistant silver paint. Any tips on cleaning the fins ready for paint ?

ttr_paul · ttr_paul

Hi all, new member here forum looks great! Got an issue with my TTR whereby it wont run correctly off idle. If you rev the bike it runs fine, but if you just open the throttle very slightly it is popping back through the carb and stalling. Carb has been stripped and cleaned and nothing obvious wrong with it...

Topic		Started By	Replies	Views	Last Post
	What is part number for K&N TTR250 oil filter? (Preview) hi all does anyone know the part number for a k&n oil filter to suit a 2011 ttr 250?	dijabringatinny	2	1259	Mar 23, 2015 by dijabringatinny
	Small oil leak!! (Preview) Hi Chaps, Can anybody tell me the purpose of the little bolt, located on the front nearside (Gear change side) corner of the cylinder head just under the cam cover?? The thread has gone on mine and there is an oil leak from it, Can i re-tap and put a larger bolt in or does it serve some special purpose?? I ha...	Baggers	7	1122	Mar 15, 2015 by Baggers
	Mirrors!! (Preview) Are the threads for the mirrors a non standard size?? I tried to use one of my mates mirrors and it would not fit, I have seen Yamaha Adaptors on ebay, some are to convert from left hand to right hand thread and some are for 8mm-10mm, I am unsure which ones to get, but think it is the left hand thread ones as the...	Baggers	4	1888	Mar 13, 2015 by Baggers
	2005 Model Frame Paint Colour (Preview) Hi Does anybody know the paint colour or code for the frame for 2005 model? Just stripped everything for a good clean and have an overwhelming urge to touch frame up!! Nothing bad just a few scuff marks etc Many Thanks Steve	coey66	11	1246	Mar 13, 2015 by Baggers
	Are the two rear-most TTR250 exhaust bolts compatible with the WR250R? (Preview) I'm talking about the two bolts that secure the exhaust to the frame. The OEM bolt (with the horrible hex key head) is apparently 90109-082G0-00 but is marked as obsolete. So what are we suppose to use? The equivalent bolt on the WR250R 95024-10016-00 looks the same except with a normal hex head. Anyon...	Sprok	1	426	Mar 13, 2015 by TTRfan
	How the Totally TTRs' shorty header pipes are made! (Preview) A customer reported a problem with the first of a batch of header pipes recently made up. It fouled the frame down tube and wouldn't tighten up against the gasket in the exhaust port. I took the rest of the batch back to the fabricators this morning and they couldn't find a problem as they fitted their jig...	TTRfan	2	877	Mar 12, 2015 by TTRfan
	Rear shocky dampening rubber (Preview) 2007 mod. 20,000 km. done little of road. But abit of beach work. Noticed the rubber perishing and breaking up. Anyone else have this problem.	Markvan	2	418	Mar 8, 2015 by TTRfan
	Oil leak (Preview) Looks like the TTR is coming off the road earlier than expected, in the last couple of days I noticed a bit of oil under the bike, had time to get a proper look today. Looks like the base gasket has perished, not sure if it has been put on correctly as it is hanging out by the edge of the engine by a few mm. Looks l...	j180	13	1369	Mar 7, 2015 by locky
	Engine 'misses' on rapid release of throttle anywhere from 1/2 to WOT... (Preview) Hi everyone, There is some great reading material on here and I've read just about all the posts I could find for info regarding my particular issue but I've found nothing similar to my issues. I'll start with a little history. I've owned my 2000 TTR250 for around 7 years and had it in storage for the last...	BennVenn	12	1087	Mar 5, 2015 by BennVenn
	Differences between the Raid and Open Enduro models (Preview) There are quite a few Raid owners on here and it would be good to use the collective knowledge to update the table of differences to put in the FAQ. This is what I have so far and corrections, additions, suggestions welcomed! BrianThe tank is larger on the Raid hence if you fill it right up its going to add w...	TTRfan	4	4580	Feb 28, 2015 by peteBLUEttr
	conti tyres any good? (Preview) Im looking to get a 110/80 conti. Twinduro. I do 80% road. will I get decent milage from it? Thanks	wizz	4	524	Feb 28, 2015 by Nickj_UK
	how much difference in wheels (Preview) I was looking at a spare set of wheels, seller says they're of a 2001 will they be the same as my 2007?	CUL8TTR	1	367	Feb 27, 2015 by TTRfan
	ttr 250 project bike not getting fuel (Preview) fuel is filling up in the bowl of the carb but wont squirt through the hole in the needle ive cleaned jets alot had carb of 5 times today just cant get fuel to go through carb is there anything i can try ? fuel is getting into bowl ive sprayed carb cleaner through and can see that getting through no problem s...	dannydandan	4	1332	Feb 25, 2015 by dannydandan
	Hard to start from Cold (Preview) Hi Guys OK got to 1993 OE not sure mileage as Im pretty sure the 660km on the speedo is wrong. When cold, if I stick the choke on and try to start the bike, it will fire up then die, now Ive found the way to start it is to keep choke off and twist the throttle a few times to pump some fuel in, do this half a dozen times...	jackvine	19	3165	Feb 24, 2015 by jasparach
	Optional extras available on new Raid and OE models - back in the day! (Preview) We sometimes get asked by Raid owners about parts on their TTRs that may not be standard. Just found this pic to show what was on offer as extras. 1st pic is the front disc and fork guards. 2nd pic is a plastic rear disc guard. 3rd pic is the kickstart lever and mechanism. 4th pic is the oil cooler option. 5th...	TTRfan	2	774	Feb 24, 2015 by TTRfan
	Need help.... TTR won't start and run properly after a lay up (Preview) Hi guys, I just purchased an 04 Ttr250. It hasn't been started for 9 months. When I brought it home thought it might be something simple but it won't start. It it started for a couple seconds once and the died. I have had no luck since. I changed the spark plug, put fresh fuel in, flushed a bit of the old fue...	Wuss	5	1156	Feb 24, 2015 by TTRfan
	exhaust stud stripped head thread on way out (Preview) so as iv heard the exhaust studs are prone to rusting. i acquired my bike over a year ago and have stripped it down resprayed the frame, stripped the engine top to bottom and now its all back together woop ! except when taking the exhaust off, first thing i did was snap one of the exhaust studs off !! argg too...	ben694	10	1216	Feb 23, 2015 by ben694
	Change clutch plates without draining oil (Preview) Just wondering if I can lean the bike on its side and change the clutch plates without losing all the oil? Also is there a gasket needed? I have a 93OE and the manual I have is for later model, which does show a gasket. if necessary I can dump the oil and reuse but if possible would prefer not too. This techni...	Oldduc	8	637	Feb 23, 2015 by Oldduc
	Rear Tyre Clearance (Preview) Can anyone tell me if a 140/80 Metzler Karoo 3 will fit inside the swing arm?	Lin	2	371	Feb 22, 2015 by Lin
	Is it worth it ? (Preview) My TTR is standard but i have a new FMF Powercore (with db killer) , it came with the bike. I'm thinking of fitting it and opening up the airbox and fitting jets to suit. Maybe i'll also get the short header pipe. I'll still run it in standard form for the next few months before deciding to do the mods. So,...	locky	1	460	Feb 22, 2015 by peteBLUEttr
	Headlight bulb again (Preview) This the second time the dip beam has gone on my TTR OE. What are my best options (the cheaper the better). I would like a more powerful light if it is possible with the standard electrics as I use it all year road. Tbh the original is p#ss poor	j180	2	424	Feb 21, 2015 by j180
	7 years in storage (Preview) Hi all. I bought a new old stock TTR250 from a dealer in the UK back in 2007 and had it delivered to my home in Spain. I think it is a 2006 model year, maybe 2005. I rode the bike for 66 miles and changed the oil and filter and then put it on a lift stand in the garage where it has remained for the last 7 years. I di...	tubefactor	4	650	Feb 21, 2015 by tubefactor
	jetting 250 carb help please (Preview) hi just a quick question should my main jet or my pilot jet be fully tightend in carb or should they be unscrewed slightly ....... im a complete novice working on a project bike	dannydandan	3	476	Feb 21, 2015 by dannydandan
	Please help - TTR dies after 20 minutes running???? (Preview) I bought a used 2006 ttr250. Bike looks like it is is phenomenal condition very little case wear marks engine looks clean, took the tank and seat off and cleaned out the carb all look practically new. Problem I am having is that the bike starts up fine with choke runs great for about 20 minutes then just d...	jonp	10	2198	Feb 20, 2015 by jonp
	rear wheel nut (Preview) do you tighten the rear wheel nut up to its specified torque or use a small tool kit spanner to tightening it up in case you need to undo it on the lanes?	widge	3	388	Feb 18, 2015 by TTRfan
	Valve stem oil seal replacement. (Preview) http://ttr250.activeboard.com/t59111364/lockys-ttr/?sort=oldestFirst&page=2	locky	25	2122	Feb 17, 2015 by locky
	poor starting from cold ...smoking a bit... (Preview) i have a 2005 model,getting more difficult to start,started it tonight but smoked a fair bit on start up. can turn kickstart over dead easy i e by hand suggests lack of compression? bike fine when hot,however went out 2 weeks back with my local trf gang couple of lads said it was smoking a bit? does it requ...	yorkie lad 1	0	330	Feb 14, 2015 by yorkie lad 1
	Shock absorber and starter problems (Preview) I helped my brother Trev with a couple of jobs on his TTR this morning. Firstly we swapped out his shock for an eBay item that I had tested. My testing is quite simple. The hardest part is taking off the spring to check the damping action i.e. that the rod moves freely and returns to full extension under its...	TTRfan	0	488	Feb 12, 2015 by TTRfan
	Head Barrel fin cleaning . (Preview) I have the head and barrel off to repace a few parts, while it's apart i plan on spraying the head and barrel with some heat resistant silver paint. Any tips on cleaning the fins ready for paint ?	locky	3	512	Feb 9, 2015 by BM Steve
	TTR popping back through carb off idle (Preview) Hi all, new member here forum looks great! Got an issue with my TTR whereby it wont run correctly off idle. If you rev the bike it runs fine, but if you just open the throttle very slightly it is popping back through the carb and stalling. Carb has been stripped and cleaned and nothing obvious wrong with it...	ttr_paul	5	1028	Feb 5, 2015 by TTRfan
«First < 1 … 36 37 38 39 40 … 63 > Last» \| Page of 63 sorted by