A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: No carb on TTR I bought! Please any advice or tip will be greatly appreciated!


Newbie

Status: Offline
Posts: 4
Date:
No carb on TTR I bought! Please any advice or tip will be greatly appreciated!
Permalink  
 


Hey guys i bought a ttr250 :) 

But it didnt have a carb on it :*( 

Ive read a bit amd shopped around the oem carb is to rich for me.. so ive turned to the tm33 mikuni. Is there a certain set of cables i should buy along with it? Anyone please help! Thank you!



__________________


Guru

Status: Offline
Posts: 691
Date:
RE: Please any advice or tip will be greatly appreciated!
Permalink  
 


My advise is save up and get an original, I haven't touched mine in 3-4 years since I did the jet mod

Now it needs a clean out as it has a flat spot just above idle

You could try youtube but the hassles and issues with an after market unit could be a nightmare especially if the Mikuni is second hand.

also I doubt anyone here can advise you, were all running the stock carby as far as I know

 

Good luck with it though, be interesting to see the results if you go aftermarket.

 

..

 



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 

Moo


Senior Member

Status: Offline
Posts: 389
Date:
Permalink  
 

There's a chap on eBay breaking a TTR, he had a carb for sale.

__________________


Super Guru

Status: Offline
Posts: 1156
Date:
Permalink  
 

BM Steve wrote:

My advise is save up and get an original, I haven't touched mine in 3-4 years since I did the jet mod

Now it needs a clean out as it has a flat spot just above idle

You could try youtube but the hassles and issues with an after market unit could be a nightmare especially if the Mikuni is second hand.

also I doubt anyone here can advise you, were all running the stock carby as far as I know

 

Good luck with it though, be interesting to see the results if you go aftermarket.

 

..

 


 mine has a Koso  32mm , flat slide , power jet ...

Here ====> http://ttr250.activeboard.com/t61885498/32mm-carb/



-- Edited by petenz on Thursday 23rd of February 2017 07:49:42 AM



-- Edited by petenz on Thursday 23rd of February 2017 07:54:15 AM

__________________

 

.....................................................................................................

 http://www.kiwibiker.co.nz

Bikes... 06 TTR250 / 09 XT660R / 1977 Montesa Cota 348 MRR / 1979 Montesa H6 125 Enduro...

E-mail  xtpete1@gmail.com



Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

Why did you install that one Pete, was the TTR one dead ?

 



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 



Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

Just saw the first line of the post, leaking



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 



Super Guru

Status: Offline
Posts: 8605
Date:
Permalink  
 

Some Mikuni info here http://ttr250.activeboard.com/t53141894/fitting-a-mikuni-tm32/



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard