A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Screen


Veteran Member

Status: Offline
Posts: 94
Date:
Screen
Permalink  
 


Spent a few hours in my ManLab today making a screen.

IMG_20151129_150735692_zpsxjhafb0v.jpg

 

IMG_20151129_150751845_zpsay6v1l8e.jpg

The top section is adjustable. Currently with just an upper and lower set of holes. If it works OK I intend to cut slots between them.

I used 4mm High Impact Acrylic sheet.

http://www.cutplasticsheeting.co.uk/clear-acrylic-sheeting/Clear-impact-acrylic.html



__________________

Life long rider. Currently the CCM 450, a GSA and a Guzzi Le Mans I've had since 1981. Sold the TTR September 2016.

Moo


Senior Member

Status: Offline
Posts: 389
Date:
Permalink  
 

Cool screen!

Bit off topic... how is that Triumph kalahari jacket? Interested in getting one :D

__________________


Senior Member

Status: Offline
Posts: 227
Date:
Permalink  
 

Paul,
That looks pretty nice man, hope it keep's the bugs off. Have you tested it as speed? Get a patent quickaww



__________________

'04 TT-R250sc Blue model U.S.A.



Super Guru

Status: Offline
Posts: 1721
Date:
Permalink  
 

Nice screen! Looks like you used the subframe handles for mounts!..

__________________

Pete. South Somerset, England.



Veteran Member

Status: Offline
Posts: 94
Date:
Permalink  
 

In no particular order...
Just some aluminium tube which was on the metal rack.

Not tried it yet. I'll report back when I have.

Not sure if it is a Kalahari. Got it off the cheep rail (£65) a couple of years ago. I just wear it green laning. Took the armour out and it fits nicely over my madmax suit. Vents open it's just about cool enough when it's warm and I'm having to work hard. OK in the rain and winter too. However, the front pockets can fill up with water and drown your phone.

After posting I turned some knurled nuts for the adjusting screws plus some large washers to spread the load on the screw heads.

I made it mainly because I'm considering doing some rides beyond my local Peak District. Perhaps the Pyrenees, so I thought a bit of weather protection might come in handy. Bigger tank next I think.


__________________

Life long rider. Currently the CCM 450, a GSA and a Guzzi Le Mans I've had since 1981. Sold the TTR September 2016.



Veteran Member

Status: Offline
Posts: 94
Date:
Permalink  
 

Well... It works. Lanes and roads yesterday set at the low position. Was stable at 55/60. Seemed to keep the wind off me. No turbulence. So far so good.

PS. Slots cut...

IMG_20151205_132308172_zpso2zmyibl.jpg



-- Edited by Paul C on Saturday 5th of December 2015 01:29:19 PM

__________________

Life long rider. Currently the CCM 450, a GSA and a Guzzi Le Mans I've had since 1981. Sold the TTR September 2016.



Veteran Member

Status: Offline
Posts: 26
Date:
Permalink  
 

Like the addition of the screen

added a picture of mine

its off my Transalp after I swooped it for a taller one



Attachments
__________________


Super Guru

Status: Offline
Posts: 1721
Date:
Permalink  
 

Nice to keep the wind off when you wear an open face motocross helmet innit.

A Caterham too eh! Loadsa fun!

__________________

Pete. South Somerset, England.



Veteran Member

Status: Offline
Posts: 26
Date:
Permalink  
 

image.jpgHi Pete car is not a Caterham but a Siva striker I built twenty years ago

Jeep is even more fun in the mud

boys and their toys eh 

 



-- Edited by Mikeycathlab on Saturday 23rd of January 2016 08:12:23 PM

Attachments
__________________


Super Guru

Status: Offline
Posts: 1721
Date:
Permalink  
 

You could get a jet ski next. Road, mud an sea!

__________________

Pete. South Somerset, England.



Veteran Member

Status: Offline
Posts: 26
Date:
Permalink  
 

image.jpgNo Pete 

prefer a more gentle ride in my Dinghy

i only live 3 miles from the sea

 



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard