A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Front suspension jitter
Post Info TOPIC: Front suspension jitter
JPVIC


Veteran Member

Status: Offline
Posts: 26
Date:
Front suspension jitter
Permalink  
 

Hi all

 

I've been noticing some jitter from my handlebars when riding off-road. Front wheel bearing is fine. One of the shocks also has a bit of a squeak and both feel a bit soft. 

Is this jitter indicative of leaking seals? It has done 30k km at least so i wouldn't be surprised. 



-- Edited by JPVIC on Monday 14th of October 2019 07:21:56 AM

__________________
JOHNYBOY


Super Guru

Status: Offline
Posts: 1104
Date:
Permalink  
 

do the cheap optiom first new seals new oil once stripped you may find broken spring set them up as standard 7 ride it you may find its ok then set them up to your liking john

__________________
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

if the seals are crook you'd be seeing oil weeping out , mines pushing 70K and still on the original seals springs ext .

I do change the oil every 12 months or so as it does break down and lose its ability to work correctly ( feels good once its done ) 

i run 7.5w synthetic oil , at 100mm from the top 13 clicks out ( bottom screw ) no air pressure 

the 10mm higher oil level takes the dive out of the front end with out heavier springs so still have the nice TTr forks but no dive .

 

just happens to work for Me ( got the info and settings from a suspension Guy who did my rear shock ) 



__________________
JPVIC


Veteran Member

Status: Offline
Posts: 26
Date:
Permalink  
 

I wasn't aware that the oil breaks down. I'll go do a thorough check for leaks. If I cannot see any leak then I'll just replace the oil and see if that fixes it. 

Thanks for the advice!



-- Edited by JPVIC on Tuesday 15th of October 2019 11:10:58 AM

__________________
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

They way it was explained to me is the polymer chains in the oil being forced through the  valves brake down over time loosing it's effectivness  .your may still have the original oil which may be well past it's use by  . If so it may  have quite a bad odour when flushing it out.  



-- Edited by ttboof on Tuesday 15th of October 2019 09:19:41 PM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Front suspension jitter


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard