A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Warning lights fail !!!
Post Info TOPIC: Warning lights fail !!!
Brighton Brad


Veteran Member

Status: Offline
Posts: 37
Date:
Warning lights fail !!!
Permalink  
 

So I decided to clean out the warning lights on my raid as the neutral light was quite dim and hey presto all the bloody bulb holders promptly fell to bits nonono Any clues on replacing them? Cheers, Brad



__________________
Brighton Brad


Veteran Member

Status: Offline
Posts: 37
Date:
Permalink  
 

Bump???


__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

Hi Brad

I guess the reason you haven't had a reply is because there isn't an easy answer confuse

The socket assembly new is nearly £80! Part number 4GY-83586-00

The best you can do is to try for a s/h part but my guess is that anyone else trying to remove the bulb holders will also find them falling apart cry

Alternatively drill the holes out to take the sturdier part from a blue model. Check with Steve to see if he has anything perhaps.

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Base


Senior Member

Status: Offline
Posts: 115
Date:
Permalink  
 

Alternatively try something like this instead.

 

 trailtek.jpg



Attachments
__________________
Brighton Brad


Veteran Member

Status: Offline
Posts: 37
Date:
Permalink  
 

Cheers Brian, I guessed that was the case! Steve has the whole binnacle light malarkey, but it's £40, may just have to bite the bullet and make sure they get some lube(Vaseline)? before fitting. Thanks for your reply, hope all's well 😃👍

__________________
ttr steve


Super Guru

Status: Offline
Posts: 2682
Date:
Permalink  
 

I know this is an old post, but the blue binnacle has a female connector block and the OE a male connector block, so they will not be cross compatible. Just checked this out for a customer. And also the OE one is no longer availableno



__________________

totallyttrs.com

 
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

What is your customer wanting to do Steve - fit the bulb holders from a bluey into a whitey? If so, a simple adapter wire would do it. Shouldn't be difficult to make biggrin



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Warning lights fail !!!


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard