A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Modifications -> Modifying a WR exhaust pipe to fit the TTR
Post Info TOPIC: Modifying a WR exhaust pipe to fit the TTR
Markvan


Guru

Status: Offline
Posts: 599
Date:
Modifying a WR exhaust pipe to fit the TTR
Permalink  
 

image.jpg

 

Any imfo would be great. WR tail pipe has to be lighter. Maybe less restrication.

As soon as i get it i will post the weight of it.  local muffler shop will 

modifiy mounts or anything needed. 



__________________

 Tweed heads Australia. 
Markvan


Guru

Status: Offline
Posts: 599
Date:
RE: Any threads on fitting a WR tail pipe.
Permalink  
 

I also have a chose to fit a wr 450.   2012 tailpipe. Thinking it maybe to much restiction.Thnx. 



__________________

 Tweed heads Australia. 
TDVT


Senior Member

Status: Offline
Posts: 148
Date:
Permalink  
 

Saw this thread when you posted it but was hesitant to reply until I had actually mounted the pipe, but I finally put it on today.

WRexhaust1_zps8e027473.jpg

I had thought to try a WR pipe after seeing Matteo's posts (LINK) a good while back & bought a WR exhaust on ebay fairly cheap. Matteo's process seemed pretty straight forward but when I went to fit mine I could see it wasn't going to be as easy. I am not entirely sure, but I will attribute the difference to his pipe being from an earlier steel-framed bike & mine ('09) being from an aluminum frame, so the bends were different.

In the end, I cut the tube just forward of the lower mounting on the TTR & added an approx. 3" straight section of 1 3/4" SS pipe to mate with the TTR head pipe. After cutting some expansion slots on the end, the TTR pipe gasket fit inside with just a little persuasion. I made an adapter for the rear mount as I didn't want to re-mount the hanger on the can or modify the TTR frame. The stand-off tube is slightly angled down to align with the WR mount. I cut the other fixed pipe mount off the discarded WR pipe & re-welded that to the pipe where it needed to go.

WRexhaust2_zps67ea89ef.jpg

In my particular case, the previous owner of the WR exhaust had removed the end tip, which I wanted, so mine has a home-brew version of the GYTR WR accessory part, which is a larger diameter than the stock WR tip.

I would say the TTR now has a deeper tone, maybe a little louder but not by much, but does run noticeably better. Seems to have more low to mid power though I only have about 20 miles

on it just today. Time will tell how it does in the woods. As I recall, I weighed both pieces when I got the WR pipe & it was around 2lbs lighter than the stock TTR exhaust

 

 

 

 

 



__________________

NEK (Almost in Canada)

VERMONT USA
Markvan


Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Thanks for the photos and imfo.  I also weighed my standart tail pipe. 

Just over 4 kg. hope to fit my wr pipe in a few weeks.  Will post pics when its complete. Thnx. 



__________________

 Tweed heads Australia. 
pug


Guru

Status: Offline
Posts: 560
Date:
cant find it for looking - fitting a WR exhaust
Permalink  
 

cant find it for looking now but think I saw a post on cutting down a WR exhaust can to fit on a TTR on hear or am I going nuts cant find it now.......... or but might have been  the ADV forum or TRF Ho what it is to get old at least I remembered too put me pants on today and where I was going. hacksaw an TIG welder on stand by 

pug



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
RE: cant find it for looking
Permalink  
 

Try here - it's regarding a YZ zorst but probably similar wink



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
pug


Guru

Status: Offline
Posts: 560
Date:
Permalink  
 

That was more than likely the one I was thinking of brian I have come across a little box with a 02 WR in parts in the shed at the bottom of the garden. been there 8 years or more after the last workshop move any how after pulling it all out turns out I had the hole bike minus the front end that went on my 500 enfield some years back stuffed in there. [ dam could have put that on the TTr ] the motors smashed to bits it let go at about 10000 rpm an a mate dumped it on me and moved too OZ. well long to shot of it is there's a nice FMF can on the frame and the standard can is in there as well seem's a pity to leave it there now I know about it



__________________
WheelMan


Senior Member

Status: Offline
Posts: 121
Date:
Permalink  
 

Yes and an update on the modded YZ can......

Well, not so much of an update. Did get a leak so I'm in the process of welding a new connection piece up to it, having chopped a bit off the end of the header. Will continue the thread when I've finished it, but I'm a bit busy with building works on my house at the mo'    hmm



__________________

Deepest Dorset
TDVT


Senior Member

Status: Offline
Posts: 148
Date:
Permalink  
 

Maybe you were looking for this one?

http://ttr250.activeboard.com/t54654495/any-threads-on-fitting-a-wr-tail-pipe/

 

I have a WR exhaust on mine & there is a link in that thread to another earlier thread with a WR pipe conversion also.

Mine was from an aluminum frame WR & took more pipe fitting than I had expected.



__________________

NEK (Almost in Canada)

VERMONT USA
pug


Guru

Status: Offline
Posts: 560
Date:
Permalink  
 

Thanks for the help all have been in the workshop today pipes on and looking an sounding good will post up some pic's in the daylight tomorrow. quick spin out on the road with a new plug in of about 10 miles no flat spots pick up seems faster and plug a nice brown after a look.

Pug

__________________
Markvan


Guru

Status: Offline
Posts: 599
Date:
RE: Any threads on fitting a WR tail pipe.
Permalink  
 

I didnt get the WR tailpipe. Got on to a usd GYTR one. Fitted straight on. 



__________________

 Tweed heads Australia. 
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
RE: cant find it for looking - fitting a WR exhaust
Permalink  
 

I will merge this thread with Markvan's Martin as they cover the same area.

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
pug


Guru

Status: Offline
Posts: 560
Date:
RE: Modifying a WR exhaust pipe to fit the TTR
Permalink  
 

ok pic's of FMF Wr pipe on the bike no welding just turned a bit of thick wall tube to fit over front pipe and inside the can pipe. and made a s steel ring to fit over the rear pipe to give a new front mount for the can. total time taken about two hours

PUG



Attachments
__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

Looks good and thanks for the update!

You make the front bracket sound easy but my guess it wasn't that straightforward. You haven't got a pic of it off the bike by any chance please?

I think one of the lessons learned (learnt?) is to use a WR exhaust off a steel-framed WRF and not one from the later ali-framed models biggrin

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
rimtrail105


Newbie

Status: Offline
Posts: 3
Date:
Permalink  
 

I used a stock muffler and inlet pipe from a 2007 kx450f with a fmf spark arrestor mounted in the end.Had to cut off 1&1/2 inches off the inlet side and cut slots on the inlet pipe and used the stock header pipe and packing.This let the muffler and inlet pipe use the same mounting holes as the stock ttr muffler uses.Took about 1 hour and the performance is way up,as well as fuel mileage.Noise was also up ,so i welded a closed end pipe to the spark arrestor internal with a nice bend and slotted the pipe in several places to get the correct sound level that i could tolerate.Like I said performance and fuel mileage is up .Fuel mileage is up to 60 mpg with kx450f muffler, from 50 mpg with stock muffler.No other changes.
rt105

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Modifications -> Modifying a WR exhaust pipe to fit the TTR


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard