A forum for owners of Yamaha TTR250 trail and enduro bikes!

wizz · Veteran Member

front spindle clamp thing?

TTRfan · Super Guru

Get it TIG welded but I am not convinced that would hold long term though.

The part number is 4V2-23167-L0-00 HOLDER,AXLE - retail in the UK is £18.84 plus VAT.

Try eBay or breakers for a used part perhaps?

Brian

TT-R250M · Super Guru

Just quickly, when you fix it, make sure that you DO NOT OVERTIGHTEN the bolts.

This is how they crack (usually).

wizz · Veteran Member

thanks. no luck on e-bay, will try and order 1 from local yam. dealer

wizz · Veteran Member

got 1 from streetbike had to come from Holland 4 days , does any one know the torque setting (watng for my manual) thanks Mark.

part no is now 3xj-23167-l000

-- Edited by wizz on Monday 8th of April 2013 07:41:04 PM

TT-R250M · Super Guru

The manual calls for 23 Nm (2.3 m * kg, 17 ft * lb) for the four outside triple clamp bolts that clamp the forks.

23 Nm (2.3 m * kg, 17 ft * lb) for the four top handlebar clamps.

40 Nm (4.0 m * kg, 29 ft * lb) for the two lower handlebar clamp retaining nuts.

120 Nm (12.0 m * kg, 85 ft * lb) for the large steering shaft bolt.

30 Nm (3.0 m * kg,22 ft * lb) fot the brake hose holder bolt.

........................................................................................

This is for the two knurled ring nuts that adjust the steering play.

Tightening steps:

Tighten the ring nut 38 Nm (3.8 m * kg, 27 ft * lb)

Loosen it one turn.

Retighten it to 5 Nm (0.5 m * kg, 3.6ft * lb).

TTRfan · Super Guru

Front axle holder M10 - 10Nm

wizz · Veteran Member

the part in question is the axle holder rhs with 4 studs that come off the fork the clamp drops over then 4 domed nuts tighten on.
thanks for the info will come in handy