A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Oil types
Post Info TOPIC: Oil types
rollingstone14


Member

Status: Offline
Posts: 15
Date:
Oil types
Permalink  
 

I just got my ttr 250, don't know tons, but I am a bit savvy to mechanics. So I picked up Penzoil Outdoor (For smaller engines) motercycle engine oil. 20W-50. 

Is this type of oil recommended?

Will it "Work"?



__________________

Some people will tell you that slow is good – but I’m here to tell you that fast is better... Being shot out of a cannon will always be better than being squeezed out of a tube.  That is why God made fast motorcycles
- Hunter S. Thompson
Cubber


Super Guru

Status: Offline
Posts: 2608
Date:
Permalink  
 

Basically, Jakob, most oils will work - but some are better than others. smile

If you take a look at this item in the FAQ pages - CLICKY THINGY - you can read what Mr Yamaha recommends.

Out and out car oils are really not suitable for bikes because car oils have "slippery" additives. Bikes' clutches usually run in the engine oil and don't like the additives.

A good dollop of Motul 5100 Semisynthetic Ester oil is given to my TTR. biggrin

Canada, where you are, can be chilly in places at certain times so I'd recommend you check the Yamaha spec. and also check what other bikers are using.

Martyn



__________________

You're never too old to learn something stupid

East Budleigh. Devon
Lin


Senior Member

Status: Offline
Posts: 129
Date:
Permalink  
 

We have used Mobil 4 T 10W/40 synthetic motorcycle oil, changed every 3000km. It seems to give excellent results, we ride in high ambient temperatures up to +38degC and the engines never overheat, cook spark plugs or fry the exhaust. Cubber is dead right about not using car engine oil, I have first hand experience of an old Honda 4- piston damage and a slipping clutch.

Not sure about your 20/50 grade though, especially in a cool/cold climate.  It's a long climb from the TTr's oil pump to the cam bearings and a 20/50 grade is not the fastest moving oil if it's really cold.  I'd prefer a 10/40 and give the cam bearings a happier start to the day.



-- Edited by Lin on Friday 23rd of November 2012 08:04:35 AM

__________________
rollingstone14


Member

Status: Offline
Posts: 15
Date:
Permalink  
 

Yeah, looking outside right now we are getting at least 0 degree weather (thats in Celsius for all you yanks), I think I will try and pick up somehting else. Already it can be a pain to start, but It always starts eventually. I ordered a new oil filter to change with it, a Hiflow, hoping that is a good buy, I have heard they are alright. 

Also, I have no idea what the previous owner used for oil, Should I use semi-synthetic or...?



__________________

Some people will tell you that slow is good – but I’m here to tell you that fast is better... Being shot out of a cannon will always be better than being squeezed out of a tube.  That is why God made fast motorcycles
- Hunter S. Thompson
barra8


Guru

Status: Offline
Posts: 932
Date:
Permalink  
 

You should be using SAE 10W 30. If the temp goes over 20 C* you can use SAE 10W 40.

I personally prefer a mineral based oil SAE 10W 30 as it is the most efficient for my area. Some use synthetic but MR Yamaha likes to use mineral oil also wink

......................

Jarrah.



-- Edited by barra8 on Wednesday 28th of November 2012 01:34:33 PM

__________________

YAMAHA ROCKS!!!!!!

TTR250ACTIVE''BORED'' ADDICT!

Favourite quote: To be old & wise first you must be young & dumb!

My own: Your never too young to learn an old trick! :)

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Oil types


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard