A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 13/48 vs 14/52


Senior Member

Status: Offline
Posts: 236
Date:
13/48 vs 14/52
Permalink  
 


These two combinations are almost identical, but even with a combination that IS identical, could there be some differences at high speed? For example, would the 14 front resuce revs at 100km/h or not. Aain, this is for a combination that is identical say around 4:1 Jusy trying to work out what is better for the engine

__________________

Prison, if you build it, they will come.



Super Guru

Status: Offline
Posts: 2610
Date:
Permalink  
 

What's the problem, Dave?

The option is the same for performance - it depends entirely what your preference is.  confuse

In my opinion I would sooner give the chain and the gearbox sprocket an easier life, therefore I opted for the 14/52 set up. (Mine currently is 14/52 dontyouknow)

When I bought my TTR it was 13/48 and in just over 16 months the 13 tooth gearbox sprocket was hooking.

In another 14 months I will be in a position to report on the 14 tooth gearbox sprocket's condition. Bur I won't worry until then.

"Could there be a difference at high speed?" you ask - if I want high speed then I use my Bandit. (Not on the lanes though) biggrin

Martyn



__________________

You're never too old to learn something stupid

East Budleigh. Devon



Senior Member

Status: Offline
Posts: 236
Date:
Permalink  
 

yeah i understand about the bandit, i have a ducati for high speed also. im wondering if something with the same ratio would have lower rpm with a bigger front sprocket. thats all.

so, same ratio, just different way of getting it. is there a difference in revs, or just in numbers.

__________________

Prison, if you build it, they will come.



Senior Member

Status: Offline
Posts: 235
Date:
Permalink  
 

I can't see how 13 48 would give a noticeably different performance to 14 52. I think they'd be the same and it will come down to personal preference. The counter argument to the front 14 tooth sprocket is that a 13 will grind both itself and the chain less against the crud trapped up near it, and the smaller rear 48 will give (admittedly very slightly) better clearance from rocks etc. Plus you don't have to alter the rear guard at all.

__________________

Pete Brown

Keighley, West Yorkshire

'94 Yamaha TTR 250 Raid (with Open Enduro headlight, grrr...)

'54 plate Suzuki GSF 650S (Bandit)

Previously Yamaha YBR125, Yamaha TY125, Yamaha TY250



Veteran Member

Status: Offline
Posts: 33
Date:
Permalink  
 

I ran a 13/48 for many years and through ignorance/neglect failed to notice that the chain slider had worn therefore damaging the s/arm seal and the s/arm itself.So it was s/arm off for repair and new bearings and seals and a new chain slider.I now run a 14/48 to give the slider a better chance,i manage quite well with this setup.

__________________


Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Dave, if the gearing is very similar between the two options then rpm vs road speed will be unaffected.

Stop worrying unnecessarily and go enjoy your amazing surroundings!!


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard