A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Supermoto Conversion (Very Easy!) - alternative wheels


Veteran Member

Status: Offline
Posts: 68
Date:
Supermoto Conversion (Very Easy!) - alternative wheels - motard
Permalink  
 


will a 06 yz,wr rim and disc fit on my 06 ttr?

or better yet, what other yamaha wheels would work on my bike,  i want a set of trail tires, and dual sport 



__________________

nw montana, usa

KGB


Member

Status: Offline
Posts: 14
Date:
RE: wheels
Permalink  
 


I don't think so. I'm pretty sure the TTRuses different axles sizes and/or spacers.

Ther rear you might be able to get away with if you use different spacers but I'm pretty sure only the TTR hub will fit the TTR.
Best bet is to hunt for a second hand set from a wrecker which is what I did when I built my motard wheels.



__________________


Senior Member

Status: Offline
Posts: 316
Date:
Permalink  
 

Are the purple / blue wheels on the older ttr the same fitting disc and wheel as the ones on my 05 ttr? I have been thinking about getting a second pair of wheels.

__________________
Location- north yorkshire


Super Guru

Status: Offline
Posts: 2608
Date:
Permalink  
 

I certainly hope the back wheel does, Adam.
I've got one for my 2000 TTR and I'm sure it fits.
The front will fit fit - but the speedo drive may need looking at. The purple wheeled speedo is a digital thingy whereas my 2000 is a cable drive.
Martyn

__________________

You're never too old to learn something stupid

East Budleigh. Devon



Senior Member

Status: Offline
Posts: 316
Date:
Permalink  
 

Cubber wrote:

I certainly hope the back wheel does, Adam.
I've got one for my 2000 TTR and I'm sure it fits.
The front will fit fit - but the speedo drive may need looking at. The purple wheeled speedo is a digital thingy whereas my 2000 is a cable drive.
Martyn


Thanks martyn, I have seen a old ttr spares or repairs quite near me so I might keep an eye on it!

__________________
Location- north yorkshire


Member

Status: Offline
Posts: 18
Date:
Supermoto Conversion (Very Easy!) - alternative wheels
Permalink  
 


I have just converted my 1997 TTR250 to a "Supermoto" .... It was relatively straightforward and CHEAP, once I figured out which wheels to use!

For the rear, I fitted a DT125X (17" x 3.5"), which more or less bolted straight on! All it required was a slight modification to the TTR wheel spacers. No extra parts were required at the rear end.

For the front, I fitted an XT125X (17" x 2.5"). Two new wheel spacers were required, plus a new brake caliper bracket(*), two spacers and two slightly longer bolts.

That's all there was to it!

Note that the spindle sizes on both of these wheels are identical to the TTR (i.e. 15mm front and 20mm rear), so I used both TTR spindles in the conversion. I got both of the wheels on Ebay!

I have attached a photo to show the results and hope you agree that it looks rather good! (although I suspect that some will regard what I have done as blasphemy!).

I am happy to give free advice to anyone who wants to do the same conversion.

Regards,

David

*Please note that I will soon be in a position to be able to supply the stainless steel brake caliper mounting plate, which I had to have specially made to enable me to fit the standard TTR caliper on the slightly larger XTX disc. It is the only complicated part required and I can have a small batch manufactured if there is likely to be any interest in them.

Supermoto.jpg

(By the way, while I'm on: Before anyone points out that the front brake hose should be on the INSIDE of the fork leg .... Yes, I know! That is how the bike was supplied to me, but it has now been corrected. It was by no means the only thing fitted incorrectly, either!)



-- Edited by Punka Walla on Sunday 4th of September 2011 06:20:17 PM



__________________


Senior Member

Status: Offline
Posts: 316
Date:
RE: Supermoto Conversion (Very Easy!)
Permalink  
 


Yeh think so, from eBay last week? I mAybe interested in the super moto conversion, like you say there seems to be plenty of dt and xt wheels available, what was the total cost of the conversion? Also what gearing are you using ? Adam.

__________________
Location- north yorkshire


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

I paid £180 on Ebay for the two wheels - the front one was BRAND NEW (RRP £320), complete with brake disc, for £80! I was lucky enough to get the two tyres donated by a friend, as they weren't good enough for his CCM R30! I spent a further £40 having the brake-caliper mounting plate and spacers made, but I recovered about £85 by selling the TTR wheels to domski1! I bought a new UFO front mudguard for £15 and recovered another few quid by selling the rear tyre which came on the DTX rim. The overall cost was about £140 .... so I am well-happy!

The tyres are Continental Escapes: 120/90-17 on the front and 140/70-17 on the rear. If anything, the front one is just a fraction too wide, as there is very little clearance between the forks. You may have noticed I've had to lift the gaiters out of the way! The rear tyre is just fine, but don't go too much wider than that! Actually, you could probably just about squeeze in a 150 wide, but it would be pretty close to the chain.

I have no idea about the gearing, other than it is unchanged from the ratio on the bike, as it was supplied to me (I used the same TTR rear sprocket on the DTX wheel). What I can tell you is that the effect of reducing the diameter of the rear wheel has been to gear the bike down by approximately 3%. Therefore, if you wanted to maintain the same gear ratio, you could go one or two teeth less on the rear sprocket. I didn't bother. As a result, the bike is slightly more responsive, but has a lower top-speed, as you might expect. The fuel economy seems to be unchanged, at about 24 kmpl (after correcting the figure to take account of the smaller wheel).

All in all, this was £140 very well spent. I'll be mainly using the bike on the road and it's made a BIG difference to the handling around bends. If feels much safer .... probably because it is safer! (especially in the wet!)



-- Edited by Punka Walla on Sunday 4th of September 2011 06:32:25 PM

__________________


Veteran Member

Status: Offline
Posts: 66
Date:
Permalink  
 

Nice jobsmile

 

Been fancying doing something similar, i like that idea better than getting my spare set of wheels respoked & new rims(much cheaperbiggrin ) Do yu have a note of the spacer sizes you made up?



__________________

I'm pink, therefore i'm spam



Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Front Wheel Spacers

22 O/D x 15 I/D x 10.0mm Long (Left / Brake Disc Side).

22 O/D x 15 I/D x 36.0mm Long (Right Side).

 

Brake Caliper Spacers (two required)

20 O/D x 10 I/D x 5mm Thick. 

These fit between the fork leg and the replacement brake caliper mounting plate. You will also need two slightly longer bolts to mount this new plate. The size of the replacements is M10 x 1.25 (Metric Fine) x 45mm long.



-- Edited by Punka Walla on Sunday 4th of September 2011 12:26:27 PM

Attachments
__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

guys anyone know from which else bikes i can fit the wheels? Is it posible to fit bigger wheels? like 3,5 front and 4,25 or 4,5 rear?

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Wider rims would certainly fit and I did indeed consider 3.5" front and 4.25" rear. However, I don't think there is anything "off-the-shelf" that would maybe bolt straight on, with the exception of perhaps Excel rims from an XT660X.

Other than that, you always have the option of having some 36-hole rims spoked onto a set of standard TTR hubs. That was going to be my original plan .... until I worked out the cost! If you want to go down that route, I got a quote from Central Wheel Components for £250 per wheel, plus another £40 for each hub to be epoxy coated.

http://www.central-wheel.co.uk/

So that's £580, plus tyres, PLUS the cost of a spare set of hubs if you don't want to cannibalise your standard wheels.

I guess the biggest advantage of doing it that way is they would bolt straight on!

(By the way, it's a waste of time contacting Talon for the hubs, as they don't do them for the TTR.)



-- Edited by Punka Walla on Sunday 11th of September 2011 09:34:38 AM

__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

i am not looking for new cause they are too expensive.Also i have 4 ttr hubs :D. My plan was to keep tha same hubs and buy used wheels so i can take the rims. If i understand good ttr hubs have 36 hole right? so i must seek for used wheels with 36 holes...?!?

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Correct. You wil find that most "standard" wheels have 36 spokes - especially Japanese ones .... but it's always worth checking to be sure, as some don't!

(If you buy the wheels on Ebay, you can normally count the spokes in the photo, if it's clear enough!)

__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

punka you said that the dt125x rear wheel fitted as it was? you think the front wheel will fit also??



__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

There is a very good chance that a DTX wheel will fit straight between the fork legs with no modifications whatsoever. Even if that is not the case, the important thing is the spindle / axle diameter. As long as it's 15mm, you can centre the wheel with just two correctly sized spacers.

Either way, you will still have to reposition the brake caliper - as I'm fairly sure that the disc is quite a bit larger on the DTX. Alternatively, it may be even easier to fit a larger caliper off a totally different bike, to give you slightly more stopping power. Both options would no doubt require a new caliper mounting plate.

Are you by any chance looking at this one?:-

yamaha dt125 dtx supermoto excel wheel front

(I considered this before I bought the XTX one!)



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

no no im not going to buy from ebay!i know a guy who search for enduro wheels for his dtx so i am thinking of buying his 17" wheels... But i want them only if they fit with not many modifications...



__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Just ask him to check the front axle size .... If it's 15mm, it's an easy job!

Good luck!



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

guyzz if the front rim is 3,5 and the rear 3,5 also is there any problem? Is it good? or worse?

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

It's all about balance.

The "optimum" wheel rim widths are determined by many factors, including the weight of the bike + rider, plus the position of the overall centre of gravity. Ultimately, the front wheel is narrower because the front tyre is narrower and that is normally because the weight distribution is towards the rear of the bike, so a larger rear tyre is needed to get the same pressure on the road at both ends.

If you put a relatively narrow tyre at the rear (where most of the weight is), then the bike will feel "light" at the front (i.e. it will tend to understeer - to use F1 terminology).

To try and visualise this, imagine how the bike might handle if you had a giant "ball-barrow" wheel fitted at the front! Basically, you would get zero grip and cornering would be almost impossible.

Having said all of this, if you put a much narrower tyre on the front, with a wider one on the same-sized rim at the rear, then that "ball-barrow" effect will of course be much reduced.



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

**** i bought the rims now. The front tyre is 120/70/17 and the rear 130/70/17 but it looks much bigger.... so i must put a bigger rear?? what size should i put to balance with the front?

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

It all depends how hard you are going to try and push your bike through corners! If, like me, you take it easy (!),  then it really doesn't matter - You'll be fine with what you've got - espeially if they LOOK ok!



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Supermoto Conversion (Very Easy!) - alternative wheels
Permalink  
 


well i wanted to push it to the limits but now i cant :( :P disbeliefno



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

i forgot to tell that the rims are from a kawasaki klx 250 and at monday im going to take out the hubs and put mine so i can install the rimms :D



__________________


Member

Status: Offline
Posts: 18
Date:
Supermoto Conversion (Very Easy!)
Permalink  
 


I think it will indeed look bloody good!

Furthermore, if these wheels and tyres are good enough for pushing a KLX to the limit, I guess they are equally good enough for a TTR!

Please post another photo of the bike on here, as soon as you've finished the job.



-- Edited by Punka Walla on Saturday 22nd of October 2011 07:02:47 PM

__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

i have big plans for this bike :D front fender of course,rear fender,socks,front light, exhaust :D

i hope on tuesday the wheels will be ready so i can post a photo!

__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Supermoto Conversion (Very Easy!) - alternative wheels
Permalink  
 


Job done! Klx 650 front wheel + klx 250 rear.I took off the hubs and put ttr ones.For the rear wheel i needed a set of spokes :(

Total cost= 350euro (not very cheap :/) But damn i like it!!!

 



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
RE: Supermoto Conversion (Very Easy!)
Permalink  
 


Well i know many places here to get muddy :P The problem is that i had a surgery and i cant ride offroad :P i have the enduro wheels also!When i get better i will get muddy and i will post photo !



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

Thanks! Punka yes change the seat cover! The first thing i did when i bought the bike was to paint the frame and change the cover!!! The bike looks much much better!

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Luckily, mine already had the black frame (epoxy-coated) when I bought it - Someone else clearly had much more sense than Yamaha ever did! The present seat cover almost makes me puke every time I look at it!

Actually, I'm waiting to find a Raid tank and seat, before tarting the bike up a bit. I would like the extra range the bigger tank gives, but I've also been told the Raid seat is more comfortable.

I must admit, your alloy rims suit the bike much better than my black ones. I might go down that route myself at some point in the future.



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

i had the same problem when i was looking at the purple rims!!!i was a bit ashamed to move with the bike :P

The raid seat looks more confortable indeed.But personally i dont like the raid tank. Basically i dont like even my tank...i have plans to fit some radiator shrouds with some way!!

I was looking for black rims but i couldnt wait and i bought these! The black looks great also dont try to paint them because the paint wont last long.You must go to a shop that they paint with specific paint for alouminium..Its expensive... Except if you want us to trade them :P



__________________


Veteran Member

Status: Offline
Posts: 65
Date:
Permalink  
 

Guyz the TTR measures the bikes speed from the front sprocket right?The speedometer must work as accurate as it was with the enduro wheels?

__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

No, the speedometer reading is affected by the diameter of the rear wheel (which is geared to the front sprocket, of course).

To illustrate this argument, consider a hypothetical bike having a rear wheel the size of a 10p piece: With the small wheel rotating at the same speed as the normal enduro wheel, both bikes would register the same speed as each other, yet the "10p" bike would be barely moving. Hence, it is easy to see that the more you reduce the rear wheel diameter, the more the speedometer over-reads.

As I stated further up this page, you can eliminate this effect by fitting a rear sprocket which is slightly smaller by the same degree as the new wheel (approximately 3% for a Supermoto wheel and tyre). This equates to somewhere between one and two teeth reduction on the rear sprocket, so take your pick.

As also stated above .... I couldn't be arsed!



__________________


Veteran Member

Status: Offline
Posts: 30
Date:
Permalink  
 

Punka Walla,

 

 I note in your original post that you might have had some spare caliper brackets made up. Do you have one for sale I could buy.

 

 I have the blue tank model and am looking at getting supermoto wheels so I can interchange.

 I do a lot of trail riding, but also use the TTR for commuting so the ability to change wheels is appealing.

 There are plenty of Xr125r wheels on ebay(I've been quoted £75 for a wheel including disc), but not many dt125x rears.

 Bozz

 

 



__________________


Member

Status: Offline
Posts: 18
Date:
Permalink  
 

Hi Matt,

What size wheels are on your TTR?



__________________


Veteran Member

Status: Offline
Posts: 68
Date:
Permalink  
 

Hi Valkman,

They are both 18 inch wheels. It is a Pirelli Sport Demon. I have two sets of rims. The other set have 100% dirt tyres. The front rim was built up from a local company.

Matt



__________________

Brisbane, Australia



Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

I think that a black seat cover and black gaiters can make a lot of difference to the white TTRs. It's a lot of work to change the colour of the frame and the wheels though. I quite like the purple rims anyway wink

Here is one of my refurbs from last year on that theme:

Bike_pics1.jpg

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

Matt - I gather the rear is just a standard TTR rim. Who did the front 18in. rim for you as it looks great. Do you swap discs each time, or have you a complete set of both dirt and road setups.

__________________


Senior Member

Status: Offline
Posts: 235
Date:
Permalink  
 

Really like the black frame, black details and black seat. I have just got a black rear sprocket and painted the side stand black, and am thinking it could be the start of a theme throughout the bike smile

Really glad you got the purple rims changed as well.



__________________

Pete Brown

Keighley, West Yorkshire

'94 Yamaha TTR 250 Raid (with Open Enduro headlight, grrr...)

'54 plate Suzuki GSF 650S (Bandit)

Previously Yamaha YBR125, Yamaha TY125, Yamaha TY250



Veteran Member

Status: Offline
Posts: 68
Date:
Permalink  
 

Hi Mww916.

That is correct. I brought 2 spare wheels all made up so I just have to swap the wheels over after work on a Friday night and go trail riding over the weekend. I have 100% dirt tyres on the other wheels. The rear rim is standard with a Pirelli Sport Demon on the back. The front rim was made up at   http://www.spoked-wheels-brisbane.com.au/ in Brisbane. It has a Bridgestone Battlax BT-45 that is starting to scallop so I will change that soon to a Pirelli as well. At 100km/h the bike is very smooth on the road and I only have 13mm left to go and the chicken strips will be gone for good. I think Brian's bike looks very smart.



__________________

Brisbane, Australia



Newbie

Status: Offline
Posts: 3
Date:
supermoto ttr250
Permalink  
 


was thinking about making my ttr 250  raid into a

supermoto any ideas about wot wheels

will fit  on bike with no mods or any ideas

about some  on road tyres that will fit my rims as is

 



__________________


Senior Member

Status: Offline
Posts: 316
Date:
What's the point of a Supermoto ??
Permalink  
 


http://youtu.be/0teLUBsMMw0

Just watched this video, I have a wr250x which is ideal for commuting to work, good on fuel, handles well on the road, high up road position for seeing past cars and most importantly FUN! I would not do as in the video link by the way, that's perhaps the darker side of supermoto???

-- Edited by domski1 on Tuesday 9th of October 2012 06:22:54 PM

__________________
Location- north yorkshire


Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

OK, A question for Supermoto owners, I saw a WR250 today that had been Supermoto'd and it got me thinking what is the point of it ??

Please shine some light here thanks

This is what I think:

They are dirt bikes, not road bikes, why not just buy a road bike ?
They are too tall
Brakes are crap compared to road bikes
No fairings or windshields
Dim Single headlights
Suspension not suited to road conditions
Narrow seats not suited to long trips

Now any Supermoto owners please chip in here and let me know why you would want to do it

Cheers
BMSteve

smilesmile

 

 



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 



Guru

Status: Offline
Posts: 932
Date:
Permalink  
 

BM Steve wrote:

OK, A question for Supermoto owners, I saw a WR250 today that had been Supermoto'd and it got me thinking what is the point of it ??

Please shine some light here thanks

This is what I think:

They are dirt bikes, not road bikes, why not just buy a road bike ?
They are too tall
Brakes are crap compared to road bikes
No fairings or windshields
Dim Single headlights
Suspension not suited to road conditions
Narrow seats not suited to long trips

Now any Supermoto owners please chip in here and let me know why you would want to do it

Cheers
BMSteve

smilesmile

 

 


 I'm with ya there Steve smile What a waste of a good dirt bike that's what i think biggrin

Not sure why anyone would do this but i guess the advantages would be.

Better handling?

Reduced road noise

Not having to replace tires as much

Because they think it looks good but really it only makes it look cr#p biggrin

Who knows confuseconfuseconfuseconfusebiggrin

............................................

Jarrah.

 

 



__________________

YAMAHA ROCKS!!!!!!

TTR250ACTIVE''BORED'' ADDICT!

Favourite quote: To be old & wise first you must be young & dumb!

My own: Your never too young to learn an old trick! :)



Super Guru

Status: Offline
Posts: 2608
Date:
Permalink  
 

The best answer I've come across is:-

"Think of them as a jeep, ground clearance and all, that handles like a Corvette."

I discovered this HERE after putting the thread title into Google.

Although I can appreciate a Supermoto I think I fall into the category of those who think, "What's the point?". confuse

I have ample bikes for my enjoyment of all aspects of motorcycling and don't think I want another bike that replaces a Jeep with a Corvette. no

Martyn



__________________

You're never too old to learn something stupid

East Budleigh. Devon



Guru

Status: Offline
Posts: 932
Date:
Permalink  
 

I think you mean http://www.youtube.com/watch?v=0teLUBsMMw0 

.........................

Jarrah.



__________________

YAMAHA ROCKS!!!!!!

TTR250ACTIVE''BORED'' ADDICT!

Favourite quote: To be old & wise first you must be young & dumb!

My own: Your never too young to learn an old trick! :)



Senior Member

Status: Offline
Posts: 148
Date:
Permalink  
 

Include me among those who don't get them either. I've had been away from motorcycles until I bought my TTR & didn't know what a "supermoto" was until I googled it. I have to think it's a generational thing & has to do more with appearances than anything else. I can see where they'd be some fun but a street bike is SO much better suited for the road supermotos seem like a novelty to me.

I think about the generational thing looking for riding gear as nearly everything is so overladen with advertising graphics (for the manufacturer) that it a real chore to find something plain. BUT... I would guess it appeals to the masses & that's why there's so much of it.

The same people actually pay REAL money for the energy-drink graphics packages for their bikes.

In the meantime I am happily in the minority.



__________________

NEK (Almost in Canada)

VERMONT USA



Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

domski1 wrote:

http://youtu.be/0teLUBsMMw0

Just watched this video, I have a wr250x which is ideal for commuting to work, good on fuel, handles well on the road, high up road position for seeing past cars and most importantly FUN! I would not do as in the video link by the way, that's perhaps the darker side of supermoto???

-- Edited by domski1 on Tuesday 9th of October 2012 06:22:54 PM


 

Now I get it, it's not a replacement for a road bike, it's a bike that does things a road bike hasn't a hope in hell of doing

as long as you aren't interestred in the things a road bike does best.

So I'm not of the opinion "Whats the point" confuse any more, It's the fun factor in them.

If I lived in the city this would be my fun factor I think.

http://www.youtube.com/watch?NR=1&v=kRwXAkjC850&feature=endscreen

http://www.youtube.com/watch?v=9YR33GxvaGc

biggrinbiggrin

 



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 



Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

A good question. If you havent tried road tyres on the standard rims, try it before going through the expense and hassle of 17" rims. I am now couriering in Sydney on the TTR - Bridgestone Battlax 21" 90/90 and 18" 110/90 road tyres have just replaced the D606's These handle just fine for mine, and I am cornering so far over that I am having a heap of fun. However - and I would like some advice - twice a year I will be dirt riding..... What tyres should I swap over to? The D606's for all round dirt riding? What is everyone else on?

__________________


Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

I run 606's front and rear, a good all rounder, smooth ride due to closely spaced knobs

Note, they are not motocross tyres

The front will wash out if you get to agressive in sandy stuff

The rear seems pretty well planted

I'm happy with them

biggrin



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 

1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard