A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Electrical Issues
Post Info TOPIC: Electrical Issues
vwanjau


Veteran Member

Status: Offline
Posts: 32
Date:
Electrical Issues
Permalink  
 

Hi Team,

I am having an electrical issue with my Bike TTR 250 1994 model.

Started with the start button having a hard time to start the bike, then when to the headlight not working, then spread to the indicator lights.

The Dashboard Odometer and the break light were the last components to die.

Now the bike does not respond at all, its not lighting anything, I check the fuse close to the batter, including the one for the head light and seems to be Ok.

 

Where else can I investigate further on the issue?

Kindly Assist!!!

 

Kind Regards

Vincent Wanjau



__________________
mossproof


Super Guru

Status: Offline
Posts: 1434
Date:
Permalink  
 

Assuming your battery is fully charged, next check all the battery connections - from the terminals to the solenoid and the earth point on the starter retaining bolt. Should all be clean and no corrosion. Also check the connections to the ignition switch - if the wires are breaking up, or the solder is giving way, that won't help.
Do you have a volt meter or multimeter for testing (or a mate with one)? Get the bike started by bump starting and check the charging voltage.
Good luck!

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

I'd go with Simon. Methodically check the wires and connector blocks going to the ignition switch and then to the loom.

I have found that it isn't uncommon for the main feed into the red connector block leading to the ignition switch to corrode.

You will have to remove the tank to get at it properly.

See here

Repairing OE loom 2.jpg



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
vwanjau


Veteran Member

Status: Offline
Posts: 32
Date:
Permalink  
 

Hi Guys,

Thank you for the assistance, it was the corrosion on the main fuse close to the battery. I have to replace it now...The bike has electrical Power now.

Kind Regards

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

Good to hear you found the fault! Thanks for letting us know what it was biggrin



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
mossproof


Super Guru

Status: Offline
Posts: 1434
Date:
Permalink  
 

Great result. Well found!

__________________
vwanjau


Veteran Member

Status: Offline
Posts: 32
Date:
Permalink  
 

Thanks Guys, but now I have another issue.

The battery is not charging now, how can I go about that.

Just replaced it after I thought it was faulty but the new one is not keeping power too.


Kind Regards
Vincent

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

Sorry to hear that Vincent. Do you have access to a multimeter to allow you to check voltage?



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
tom13


Senior Member

Status: Offline
Posts: 230
Date:
Permalink  
 


Vincent, I bought 2 new batteries and they were wrong. Only now is Yuasa good.

__________________

Grandpa Tom

 
vwanjau


Veteran Member

Status: Offline
Posts: 32
Date:
Permalink  
 

wow,I dont have access to one, which component do I need to measure?

 

Thanks Grandapa Tom, it has to be a different issue, I have been using the same battery for a while now.

 

Kind Regards



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

According to the manual, charging voltage should be 13.0 to 15.0V at 3,000 rpm (tested using a fully charged battery).

 



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
ttr steve


Super Guru

Status: Offline
Posts: 2682
Date:
Permalink  
 

vwanjau wrote:

wow,I dont have access to one, which component do I need to measure?

 

Thanks Grandapa Tom, it has to be a different issue, I have been using the same battery for a while now.

 

Kind Regards

 Doesn't  mean it can't be faulty / knackered,  how old is it?



__________________

totallyttrs.com

 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1098
Date:
Permalink  
 

even from new can be faulty not every one would be checked

__________________
ttr steve


Super Guru

Status: Offline
Posts: 2682
Date:
Permalink  
 

JOHNYBOY wrote:

even from new can be faulty not every one would be checked

 Yep  had to send my motobatt back the other day, as faulty from new



__________________

totallyttrs.com

 
mossproof


Super Guru

Status: Offline
Posts: 1434
Date:
Permalink  
 

Vincent, you will need to find a voltmeter, or preferably a multimeter which can measure voltage and resistance, to test your charging system. The only other option you have is to start throwing new parts at the bike until the problem goes away!

You start with measuring voltage across the battery terminals. 12.5 to 13v ish is normal with the engine and ignition off. Start the bike and the voltage should rise to anything between 13.5 and 14.5. If it doesn't, then you know there is a problem.

2 components need testing next. Regulator/rectifier unit (the finned aluminium block bolted to the frame under the tank) and the stator. (inside the flywheel side casing, but you will only need to check the external wires.)


__________________
dlee22


Senior Member

Status: Offline
Posts: 414
Date:
Permalink  
 

I had an issue with my voltage today, it was reading 11.8v when running and not charging higher. Took mine rectifier off, notices the red wires /connector was in a bad way but will clean up etc.

The rectifier was confirmed as faulty as when I re connected the girlfriends one to mine it was reading 13.5v

Hope your problem is as easy to fix

__________________

Thanks

Daniel Lee
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Electrical Issues


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard