A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Today's top tip - undoing a sprocket nut when the engine is out of the frame
Post Info TOPIC: Today's top tip - undoing a sprocket nut when the engine is out of the frame
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Today's top tip - undoing a sprocket nut when the engine is out of the frame
Permalink  
 

Stripping down an engine tonight, I used the "jam the sprocket with a socket" technique - worked a treat biggrinbiggrin

An odd thing, the nut needed a 32mm spanner (I haven't got a deep socket that size) and I am sure that nearly every other sprocket nut I have encountered is 30mm confuse  I will try and remember to check it out tomorrow.

Also, I am pretty sure that the previous owner had been running fully synthetic oil (reddish in colour and really "thin") but I will try and check with him. The reason for mentioning this is that, internally, the engine is the cleanest I have ever stripped down with none of the usual brown oil staining. Big and little ends both good. Interesting coz I have never tried fully synth as I prefer a semi-synth as the oil has a bit of "body" to it.

Brian

20200817_211501.jpg



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
comeragh


Senior Member

Status: Offline
Posts: 143
Date:
Permalink  
 

Good idea . I have ran bike on fully synth 5/30.It is alot more racy and responsive but went back to 10/40 semi because it felt more cushioned for long runs .I don't know if I imagined it but for road engine felt happier on a heavier oil .If I were only after performance the light synth is better .


__________________
TerryK


Super Guru

Status: Offline
Posts: 1522
Date:
Permalink  
 

I use this bad boy, cost me less than $100au & makes it so much easier, I used to get the wife to sit on the bike with both brakes on etc & it would still try to drive off the stand, now I just use the battery rattle gun. If the engine is out of the frame as per photo above would still have to lock the sprocket.

118217585_2579486919028316_7030186396689876949_n.png

Terry



-- Edited by TerryK on Sunday 23rd of August 2020 03:23:37 AM



-- Edited by TerryK on Sunday 23rd of August 2020 03:24:01 AM

Attachments
__________________

TT-R250 & WR250R for dirty fun

Triumph Thruxton for the twisties SOLD

Triumph Scrambler for fun

 YOUTUBE channel https://www.youtube.com/channel/UCPSstOEnd2NSu0Va6kt2ySg
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

I'm converting to cordless tools 

If only they were around when I was on the spanners 





__________________
TerryK


Super Guru

Status: Offline
Posts: 1522
Date:
Permalink  
 

ttboof wrote:

I'm converting to cordless tools 

If only they were ariundvwhen I was on the spanners 

 So true, they have come such a long way, I use a cordless compressor when changing my tyres now easier than dragging out the 240v unit, same with drills

 

Terry



__________________

TT-R250 & WR250R for dirty fun

Triumph Thruxton for the twisties SOLD

Triumph Scrambler for fun

 YOUTUBE channel https://www.youtube.com/channel/UCPSstOEnd2NSu0Va6kt2ySg
Herman


Veteran Member

Status: Offline
Posts: 55
Date:
Permalink  
 

All true , I did the brakes on the Amorok with cordless tools in the time it took my wife to make a fish finger toasted sarnie. I could smell it cooking so there was a bit of an incentive.

__________________
ttr steve


Super Guru

Status: Offline
Posts: 2682
Date:
Permalink  
 

biggrinbiggrinbiggrin made me laugh!



__________________

totallyttrs.com

 
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

Agree the smell of food supports the need for the right tools to eat on time 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Today's top tip - undoing a sprocket nut when the engine is out of the frame


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard