A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Replacing swingarm bearings on a Raid
Post Info TOPIC: Replacing swingarm bearings on a Raid
Flatline


Member

Status: Offline
Posts: 19
Date:
Replacing swingarm bearings on a Raid
Permalink  
 

When I look where the bearings will fit, there is a lip perhaps an inch in where the bore size is smaller

Should the bearing be pushed in until it stops against the lip

This will leave the bearing about 15mm in from the outside edge of the swingarm

 

No pictures as I've already pushed them in so that they are flush with the outside edgeno

Thanks for any help😊



__________________
ttr steve


Super Guru

Status: Offline
Posts: 2682
Date:
Permalink  
 

Like this is correct

Swing arm bearing fitting 006.jpg



__________________

totallyttrs.com

 
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

http://www.ttr250.com/Swingarm_bearing_replacement/Swingarm_bearings.htm



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Flatline


Member

Status: Offline
Posts: 19
Date:
Permalink  
 

Thanks to both, it's as i thought 🙂



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Replacing swingarm bearings on a Raid


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard