A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Why so many holes and will they cause issues?
Post Info TOPIC: Why so many holes and will they cause issues?
spud351


Veteran Member

Status: Offline
Posts: 82
Date:
Why so many holes and will they cause issues?
Permalink  
 

So my wheels have a number of holes in the rims. I assume for rim locks as I can't think of anything else. I don't have rimlocks but will the holes cause issues? Won't the inner tube try to get out?  It hasn't done as I've pumped them up but i wouldn't want it to change it's mind at speed. If they need blocking up which is a pain now the tyres are on what could I use? 

 

 



__________________
JOHNYBOY


Super Guru

Status: Offline
Posts: 1104
Date:
Permalink  
 

just fit a rimlock they are cheap to stop the tyre spinning on the rim no brainer

__________________
mossproof


Super Guru

Status: Offline
Posts: 1435
Date:
Permalink  
 

The rim tape inside will help prevent the tube from trying to escape. Normally if rim locks are not fitted a rubber plug is fitted instead.
I sometimes don't fit a rim lock in the front as I rarely lower the pressure in the front tyre and I'm not an aggressive braker. Better wheel balance and fewer vibes.
If you're road riding don't worry about a rim lock. If you want to fit one, the Motion Pro ones are nice and light so don't affect your wheel balance too badly.

__________________
spud351


Veteran Member

Status: Offline
Posts: 82
Date:
Permalink  
 

What sort of rubber plug, ones you can buy? I've never seen them and I could probably get them in from the top if I let the tyre down. Where are they from do you know?

__________________
spud351


Veteran Member

Status: Offline
Posts: 82
Date:
Permalink  
 

Don't really want to bother with rimlocks now the tyre is on.



__________________
ttr steve


Super Guru

Status: Offline
Posts: 2683
Date:
Permalink  
 

would not like to run a tyre without a rim lock, low psi would mean tyre creep and that would rip the valve off.



__________________

totallyttrs.com

 
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

spud351 wrote:

What sort of rubber plug, ones you can buy? I've never seen them and I could probably get them in from the top if I let the tyre down. Where are they from do you know?

The Yamaha part is called a grommet - part number  90480-10068 

However, they are designed to be fitted from the inside of the rim. After forgetting to fit one, I tried fitting it from the outside unsuccessfully cry

Best to bite the bullet and buy one, let the air out and pop the tyre off the bead on one side to give you room to push it over and fit the grommet. 

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
spud351


Veteran Member

Status: Offline
Posts: 82
Date:
Permalink  
 

Booooooo


__________________
TTRfan


Super Guru

Status: Offline
Posts: 8606
Date:
Permalink  
 

I found one lurking in a cobwebby box!

Rim grommet.JPG



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
spud351


Veteran Member

Status: Offline
Posts: 82
Date:
Permalink  
 

Great stuff thanks.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Why so many holes and will they cause issues?


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard