A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Grease nipple pic
Post Info TOPIC: Grease nipple pic
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Grease nipple pic
Permalink  
 

Got a request for a photo of my swing arm grease nipple .couldn't send it as a pm so posting it biggrin might be my new phone 

IMG_20170401_152923.jpg



Attachments
__________________
Moo


Senior Member

Status: Offline
Posts: 389
Date:
Permalink  
 

Has anyone seen a headstock grease nipple? Noticed my bluey has one...

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

Another photo of a swingarm grease nipple. It doesn't look as accessible as yours Les!

13.jpg

 

To the very best of my knowledge no TTRs were fitted with a grease nipple on the headstock from the factory. Any found will be retrofitted by the owner. A good idea to keep the head races/bearings in good shape although it takes a lot of grease to fill up the space! It is surprising what comes out when you give a couple of pumps after a power wash  wink

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1105
Date:
Permalink  
 

hi brian is the headstock blocked off to the frame so that your not filling the frame

__________________
ttboof


Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

I just marked the spot with a marker before I pulled the swing arm out 



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

JOHNYBOY wrote:

hi brian is the headstock blocked off to the frame so that your not filling the frame

It must be John - but I haven't got a frame here to double check.

I have seen enough done to assume it is blocked off.

One thing to check is that the rubber plug is fitted to the centre shaft of the yokes under the bars. Made a right mess with my brothers TTR until we realised why it was taking so much grease disbelief 



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1105
Date:
Permalink  
 

cheers brian possible ttr steve could have a frame to confirm this

__________________
ttr steve


Super Guru

Status: Offline
Posts: 2684
Date:
Permalink  
 

Just checked

There are no holes from the headstock into the framesmile



__________________

totallyttrs.com

 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1105
Date:
Permalink  
 

many thanks steve time for a grease nipple ill look for robber cant understand how grease can get to inside of hollow tube where the nut tightens on to top yoke

__________________
petenz


Super Guru

Status: Offline
Posts: 1156
Date:
Permalink  
 

the steering head would hold half a tube of grease... what a mess when yer take it apart..



...

__________________

 

.....................................................................................................

 http://www.kiwibiker.co.nz

Bikes... 06 TTR250 / 09 XT660R / 1977 Montesa Cota 348 MRR / 1979 Montesa H6 125 Enduro...

E-mail  xtpete1@gmail.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Grease nipple pic


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard