A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Clutch basket punch mark ?
Post Info TOPIC: Clutch basket punch mark ?
Truxx


Veteran Member

Status: Offline
Posts: 76
Date:
Clutch basket punch mark ?
Permalink  
 

image.jpgI'm in the middle of putting my clutch back together after hearing a slight rattle in there somewhere. I can't find anything wrong so putting it bac together. 

The manual says to align the punch mark on the pressure plate to the mark on the basket?

i can see the punch mark on pressure plate but not on basket? 

Any advice? 

As you can see in pic the basket has multiple marks all round it lol



-- Edited by Truxx on Sunday 24th of August 2014 10:50:02 AM

Attachments
__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

That's odd. I have checked my workshop manuals and can't find the reference to punch marks confuse

What section of the manual did you find it in please?

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Truxx


Veteran Member

Status: Offline
Posts: 76
Date:
Permalink  
 

image.jpgPage 2c-34

pic attached



-- Edited by Truxx on Monday 25th of August 2014 11:15:30 AM

Attachments
__________________
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

Ahhhh - the pic explains it. That's not from a TTR250 workshop manual and the pic is of a clutch from another bike and not a TTR250 so forget about the punch marks - that doesn't apply wink

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Truxx


Veteran Member

Status: Offline
Posts: 76
Date:
Permalink  
 

Ok cheers Brian. The manual does say for tr250 aswel as a few others so I could have been looking on the wrong page.
While I'm here can you confirm the valve clearances for me just incase I've read that wrong in the book aswell lol

Thanks
Dave


__________________
Cubber


Super Guru

Status: Offline
Posts: 2610
Date:
Permalink  
 

Valve clearences are :-

Inlet 0.09 ~0.17 mm

Exhaust 0.19 ~ 0.27 mm

Well, they are for my 2000 model TTR.

How's Sunderland these days Dave, a bit damp? smile

Martyn



__________________

You're never too old to learn something stupid

East Budleigh. Devon
TTRfan


Super Guru

Status: Offline
Posts: 8607
Date:
Permalink  
 

See here



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Truxx


Veteran Member

Status: Offline
Posts: 76
Date:
Permalink  
 

Cubber wrote:

Valve clearences are :-

Inlet 0.09 ~0.17 mm

Exhaust 0.19 ~ 0.27 mm

Well, they are for my 2000 model TTR.

How's Sunderland these days Dave, a bit damp? smile

Martyn

Thanks Martyn same specs as my manual says. Was worth double checking though smile

not to sure about Sunderland but it's been a nice enough day . I rode from my garage in jesmond down to blanchland through the greenlanes upto slaley forest, then after playing in there for an hour or so I rode up a68 to otter burn then up the back roads towards rothbury to settle down in my caravan :)

not a single bit of rain all day which is a shame really , lanes are better when there really muddy lol.

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> Clutch basket punch mark ?


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard