Hi I need front and rear wheel hubs no spokes or rims just the hubs dont care if bearings are knacked as long as there usable condition, going to supermoto my ttr for next year and leave my standered wheels for winter as dont want to modify anything just switch them.
The WR's use the same hubs possabley the YZF aswell...
Not to start an argument or be nasty but...No they don't (I own one).....
The WR/YZ rear hub is similar to the TTR250 hub but the sprocket side bearing is different and there is only two bearings. Not sure about the width difference but I am pretty sure it would be different to the TTR250 considering that the TTR250 swingarm is 21mm wide and the WR is 20mm wide.
The WR/YZ front hub on the other hand is different to the TTR250 and uses a different size axle/bearings. In addition, the YZ hub has no locking tabs for the speedo.
Jarrah
__________________
2000 TT-R250M-
Spoiler
Ported & polished, 73mm bore, Wizeco piston, US header pipe, FMF Q4, #150 main jet, #52.5 pilot jet, throttle stop screw adjusted, larger snorkel, GYT-R air filter, NGK Iridium spark plug, 14/51 gearing, NOS +
