A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Feedback, suggestions, chat and general banter -> Heated grips from hong kong?
Post Info TOPIC: Heated grips from hong kong?
domski1


Senior Member

Status: Offline
Posts: 316
Date:
Heated grips from hong kong?
Permalink  
 

Just thinking about getting some heated grips on the ttr, I have looked at various second hand sets of Oxford grips as I am in a budget with the bike and then I saw these from hong kong, similar to the ones Brian uses but quite a lot cheaper! Anyone ordered any? http://www.ebay.co.uk/itm/370646465319#ht_3108wt_1067



__________________
Location- north yorkshire
spit


Veteran Member

Status: Offline
Posts: 45
Date:
Permalink  
 

I'd like to know too. I bought a similar set up, American, off Ebay. Got it working, I think, but so little heat is generated they aren't wiorth switching on.

I don't understand the technical blurb so I have to go on feedback. I know the Symtec heated grips work well but cost more than I want to spend. Any knowledge out there?



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

I found this on the Devon TRF forum included here  http://devongtrf.activeboard.com/t22519085/fitting-symtec-heated-grip-pads/:

"The heated grips that I bought so cheaply are Cr#p, and not worth anything. Let me start from the beginning.

Firstly there is a very non existent glue on the underside of the pad, which explains why they put in the heat shrink. So after eventually managing to get them stuck on, the wiring is only just long enough to stretch from grip to grip and there is no wire to go back to the battery. You need to make that up yourself. I then thought that I would mount the switch, which fell apart as I picked it up, no worries thought I, I have a spare in the cupboard, so I wired a new switch in after carefully making sure what each wire did. I then made up a lead back to the battery incorporating a ten amp fuse. I connected it to the battery and went for the switch. The fuse blew, OK, check the wiring, nothing wrong with what I had done. So I fitted a new fuse in the thought that just maybe it was a dodgy fuse, that one blew as well. So I took the whole lot back off the bike and traced the fault to a dead short in one of the heater elements itself. I then placed the whole lot in the bin all except for my switch.

You pays your money and takes your choice. Or "C`est la vie", as those strange people over the water say. "

There was also one positive feedback on the cheap grips!

Also see http://www.ukgser.com/forums/showthread.php?p=1575944

Hope that hasn't confused things.

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
domski1


Senior Member

Status: Offline
Posts: 316
Date:
Permalink  
 

I think you have answer my question Brian, they did seem rather too good to be true!

__________________
Location- north yorkshire
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Feedback, suggestions, chat and general banter -> Heated grips from hong kong?


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard