A forum for owners of Yamaha TTR250 trail and enduro bikes!

Paul13 · Paul13

Hi Just purchased a OE TTR 250, do not have a service book, or anything to know how to release the seat or the battery location. If I may have some help please, do not want to force the seat, and guessing the battery is located under there. Is there a service manuel I can download please. Thanks Paul...

Tucker250 · Tucker250

Hi was wondering if anyone could help me before I pull any more of my hair out?? I replaced the oil and oil filter on my ttr today all was ok untill I started the bike up after i had finished as I noticed That when I rev the bike oil comes out of the top of the oil filter housing and when I release the revs and she i...

jasparach · jasparach

Hi all, best wishes for the festive season and a happy new year to one and all. I have a question about a ttr that a friend of mine has and it is this, his bike is seems like it is snatching when driving slowly and there seems to be a roughness in the drive train almost as if it is missing and then catching again...

EastDevonTTR · EastDevonTTR

Hi All, Having had no problems with starting for the first few months my 2004 TTR 250 is now a reluctant starter. If I start on choke then doesn't like to be left on it for anything more than a minute before cutting out. Today was made worse because I had flat battery and had to kick start it. After sever...

rollingstone14 · rollingstone14

I was out riding dirt about a week ago and I took a hill a little too steep for me. My boot slipped off the edge of the hill (small trail) and I tumbled down the edge, dropping the bike. I was fine but when I lifted my bike back upright I noticed that the gear shift lever had broken (right at the point where the le...

sammyttr · sammyttr

Been a hell of a day I've been trying to bleed my brakes on the Kawasaki zzr600 and no matter how much new fluid we have put through its still not biting, just remaining really spongy and not stopping the bike at all, it has got new seals and fluid and still refuses to bleed, any ideas and too top it all off fo...

wobbly · wobbly

Hi, new to the forum and I have managed to get a puncture on the rear tyre. Problem seems to be removing the rear axle, I have removed the axle nut and placed a piece of wood over the axle and try to drift it out with a hammer but up to now no signs of moving

any ideas would be appreciated to get the axle out....

ttrpaul · ttrpaul

Hi fellow TTR-ers, Possibly a stupid question, but what are the signs of petrol tap failure? After I've parked her up, I never turn off the petrol on my 4GY and it's usually fine... til last week when she peed petrol all over the floor and seems to have filled the sump with petrol too :-/ Do I need to rebui...

colin13846 · colin13846

Quick look at the bottom off the chain slider and appeared like it was wearing through dangerously close to swing arm. Manaaged to remove it for a closer inspection, fortunatly it had not yet marked the swinging arm. New one required. Brian are these available as your site appears to direct me to a diff...

cgwinner · cgwinner

I have a bent front brake disc on my 2007 blue TTR250. Does anyone know if a front disc from a '99 will fit? Have a lead on one for cheap. thanks, Chris

NIKOS · NIKOS

hi guys. Recently I have observed oil leak from a bolt (see pic.), although it is tightly screwed. I guess this bolt is for the oil pressure. Any ideas what to do? Have anyone else the same problem? Thanks

efiles123 · efiles123

So i'm still trying to fix my friend's ttr 250 after it sat for 2 years outside. Before that the bike ran fine so I decided to tear down the carb to find it filthy. After a thorough cleaning with solvent and compressed air, I replaced the float valvle assembly before re-assembling the carb. I charged u...

yamalama · yamalama

Hi all, The top and bottom mounting points of the rear shock use spherical bearings. How do you grease these? The Yamaha workshop manual says that the linkage bearings are polylube type that never need regreasing. Does this include the shock mounting spherical bolts? Is this still true after eight y...

nwrider · nwrider

didnt really get what i needed answered, i have a 2006 250 us, i have changed the spark, air,oil, filters, brakepads. I am thinking about taking to a mechanic for a check up/tune up. other than wheel bearings what should i have him go over? i have heard metion of valve clearance, thanks brett

nwrider · nwrider

I bought my 06 ttr 2 years ago, and done the mods, street legaled it here in montana, new q4 muffler, running great. I would love to bring to a local mechanic to check out. What should i have him check. Not really a tune up as i can change oil, air, spark. But what should i have him do? Thinking about valves,t...

BM Steve · BM Steve

I have big feet, there's no hiding it !, then put them inside a pair of riding boots and well... there bloody enormous. So a question, anyone in Aus that has a set of unwanted/rusted/damaged pegs they want to get rid of ? I want to mod them and make them wider and longer I want to keep the OEM items just in case...

Lin · Lin

Can anyone tell me the size of the internal hex in the TTR head bolts? I think its 10mm hex as the bolt dia is 10mm but I need to be sure...

gregorious77 · gregorious77

My mate has a TTR which we are repairing (sprag). the engine only has 4GY and the same on the frame. No other numbers or letters! the V5 says the same too! Sticker onthe headstock is all in Japanese except II-197 and the 4GY Does this seem right?

TTRinEgypt · TTRinEgypt

I have a strange one here... I had my bike sitting for quite a while (years) and took it out a while ago. I cleaned out the carb, airbox, oils etc and put in a fresh plug. For some reason it is very difficult to start. It starts with choke full out, but dies immediately (2 secs). And dies even quicker if I try ap...

burton500 · burton500

I disconnected my battery recently, and when I refitted it, the odometer mileage reading reset itself to zero - not the trip reading, but the total mileage for the bike. When I took the bike to my Yamaha dealer for it's annual mot test last week, he said there are quite a few batches of Yamaha speedo's...

fatboy686 · fatboy686

My second thread started in a day; something of a record for me! So, I got my TTR out of the garage after not being out for a couple of months, to prep it for its MoT. She started first time and all looked well until I checked the back brake - Nothing. The pedle pressed all the way down but no braking on the back...

mpok3 · mpok3

My seat is seriously slippery. When I'm two-up it's not long before the pillion has squashed my unmentionables into the tank. Does anyone know if a) There's a remedy product to make it more sticky? Or b) Someone males a cheap grippy seat cover for the TTR? I have an 05 UK model. Thanks all

luk3B · luk3B

Hey there peoples thanks for letting me join ya forum its a mad site!! I was just woundering why my ttr isnt getting spark? it has just been rebuilt and was running b4 it was pulled down!! i have replaced the startor motor, battery, and coil ( all brand new) asweel as checked fuses and saftey switches i...

ajosborne · ajosborne

Hi All, My TTR is rattling a lot more than I remember it doing at the end of last year. When riding at a reasonable pace (about 40mph) on a road (tarmac) and neither accelerating (under-load) nor decelerating (coasting) the top end has a distinct quite loud rattle that I don't recall it used to do. It's al...

Medic5916 · Medic5916

I did a lot of searching and read a lot about uncorking the TTR250 with a lot of good information. The problem that I am running into are the specifics. I have a 1993-1994 TTR250 that I just got professionally painted black. It looks incredible! I'll post some pictures when I can. As I looked for all of th...

efiles123 · efiles123

I'm fixing up my friend's 03 ttr 250 that has been stored outside for the last 3 years. The bike had previously ran good before being neglected, so he handed the bike over for a quick tune up and carb clean. When I disassembled the bike, I noticed a lot of dirt in the air boot along with some in the carb. ...

majorendo · majorendo

Hi all, I was just wondering if there is still an active link for the workshop manual? Thanks, Charlie

zak stoker · zak stoker

My bike is knocking sound when you ride only and I've replaced the out put shaft bearing can any1 help?

fatboy686 · fatboy686

A quick and hopefully simple quetsion; I have seen plenty of choice of graphics sets availabile for the tank, mudgaurds etc. But I would like plain white stickers for above the headlight and side panels (i.e the number boards if it were a MX bike). What do you use for these? Thx, Nigel.

Thor1340 · Thor1340

Just bought this bike and would lie to know is there a service manual available? I may be being dense but can only seem to find later variants and the Haynes manual that coverts the Blue bikes. Sorry if I am being dense. Many thanks Stuart

Topic		Started By	Replies	Views	Last Post
	Removing the seat and battery location help please (Preview) Hi Just purchased a OE TTR 250, do not have a service book, or anything to know how to release the seat or the battery location. If I may have some help please, do not want to force the seat, and guessing the battery is located under there. Is there a service manuel I can download please. Thanks Paul...	Paul13	3	8325	Apr 5, 2013 by TTRfan
	oil leak from filter housing??? (Preview) Hi was wondering if anyone could help me before I pull any more of my hair out?? I replaced the oil and oil filter on my ttr today all was ok untill I started the bike up after i had finished as I noticed That when I rev the bike oil comes out of the top of the oil filter housing and when I release the revs and she i...	Tucker250	7	1074	Apr 5, 2013 by TTRfan
	TTR drive train noise issues (Preview) Hi all, best wishes for the festive season and a happy new year to one and all. I have a question about a ttr that a friend of mine has and it is this, his bike is seems like it is snatching when driving slowly and there seems to be a roughness in the drive train almost as if it is missing and then catching again...	jasparach	19	4719	Apr 4, 2013 by Cubber
	Starts, runs, stops....... (Preview) Hi All, Having had no problems with starting for the first few months my 2004 TTR 250 is now a reluctant starter. If I start on choke then doesn't like to be left on it for anything more than a minute before cutting out. Today was made worse because I had flat battery and had to kick start it. After sever...	EastDevonTTR	4	991	Apr 2, 2013 by TTRfan
	Gear shift lever. (Preview) I was out riding dirt about a week ago and I took a hill a little too steep for me. My boot slipped off the edge of the hill (small trail) and I tumbled down the edge, dropping the bike. I was fine but when I lifted my bike back upright I noticed that the gear shift lever had broken (right at the point where the le...	rollingstone14	6	1951	Apr 2, 2013 by rollingstone14
	brake bleeding (Preview) Been a hell of a day I've been trying to bleed my brakes on the Kawasaki zzr600 and no matter how much new fluid we have put through its still not biting, just remaining really spongy and not stopping the bike at all, it has got new seals and fluid and still refuses to bleed, any ideas and too top it all off fo...	sammyttr	2	835	Apr 1, 2013 by sammyttr
	Rear axle problem (Preview) Hi, new to the forum and I have managed to get a puncture on the rear tyre. Problem seems to be removing the rear axle, I have removed the axle nut and placed a piece of wood over the axle and try to drift it out with a hammer but up to now no signs of moving any ideas would be appreciated to get the axle out....	wobbly	12	3529	Mar 29, 2013 by Marshall
	Petrol tap /pet**** problem? (Preview) Hi fellow TTR-ers, Possibly a stupid question, but what are the signs of petrol tap failure? After I've parked her up, I never turn off the petrol on my 4GY and it's usually fine... til last week when she peed petrol all over the floor and seems to have filled the sump with petrol too :-/ Do I need to rebui...	ttrpaul	6	1373	Mar 28, 2013 by ttrpaul
	Chain slider on its way out (Preview) Quick look at the bottom off the chain slider and appeared like it was wearing through dangerously close to swing arm. Manaaged to remove it for a closer inspection, fortunatly it had not yet marked the swinging arm. New one required. Brian are these available as your site appears to direct me to a diff...	colin13846	2	385	Mar 26, 2013 by colin13846
	Front brake disc sizing (Preview) I have a bent front brake disc on my 2007 blue TTR250. Does anyone know if a front disc from a '99 will fit? Have a lead on one for cheap. thanks, Chris	cgwinner	2	379	Mar 25, 2013 by cgwinner
	oil leak (Preview) hi guys. Recently I have observed oil leak from a bolt (see pic.), although it is tightly screwed. I guess this bolt is for the oil pressure. Any ideas what to do? Have anyone else the same problem? Thanks	NIKOS	2	544	Mar 23, 2013 by NIKOS
	ttr 250 won't start (Preview) So i'm still trying to fix my friend's ttr 250 after it sat for 2 years outside. Before that the bike ran fine so I decided to tear down the carb to find it filthy. After a thorough cleaning with solvent and compressed air, I replaced the float valvle assembly before re-assembling the carb. I charged u...	efiles123	8	4333	Mar 23, 2013 by TT-R250M
	How do you grease the rear shock's spherical bearings? (Preview) Hi all, The top and bottom mounting points of the rear shock use spherical bearings. How do you grease these? The Yamaha workshop manual says that the linkage bearings are polylube type that never need regreasing. Does this include the shock mounting spherical bolts? Is this still true after eight y...	yamalama	2	1433	Mar 22, 2013 by yamalama
	tune up questions (Preview) didnt really get what i needed answered, i have a 2006 250 us, i have changed the spark, air,oil, filters, brakepads. I am thinking about taking to a mechanic for a check up/tune up. other than wheel bearings what should i have him go over? i have heard metion of valve clearance, thanks brett	nwrider	2	772	Mar 22, 2013 by TTRfan
	bikes running good, snows melting (Preview) I bought my 06 ttr 2 years ago, and done the mods, street legaled it here in montana, new q4 muffler, running great. I would love to bring to a local mechanic to check out. What should i have him check. Not really a tune up as i can change oil, air, spark. But what should i have him do? Thinking about valves,t...	nwrider	2	299	Mar 19, 2013 by TDVT
	I have BIG FEET Foot Pegs (Preview) I have big feet, there's no hiding it !, then put them inside a pair of riding boots and well... there bloody enormous. So a question, anyone in Aus that has a set of unwanted/rusted/damaged pegs they want to get rid of ? I want to mod them and make them wider and longer I want to keep the OEM items just in case...	BM Steve	13	1351	Mar 19, 2013 by texasT
	HELP! Memory loss... (Preview) Can anyone tell me the size of the internal hex in the TTR head bolts? I think its 10mm hex as the bolt dia is 10mm but I need to be sure...	Lin	2	317	Mar 17, 2013 by Lin
	Engine and frame numbers? (Preview) My mate has a TTR which we are repairing (sprag). the engine only has 4GY and the same on the frame. No other numbers or letters! the V5 says the same too! Sticker onthe headstock is all in Japanese except II-197 and the 4GY Does this seem right?	gregorious77	2	1496	Mar 16, 2013 by gregorious77
	Difficult start (Preview) I have a strange one here... I had my bike sitting for quite a while (years) and took it out a while ago. I cleaned out the carb, airbox, oils etc and put in a fresh plug. For some reason it is very difficult to start. It starts with choke full out, but dies immediately (2 secs). And dies even quicker if I try ap...	TTRinEgypt	5	697	Mar 7, 2013 by Yuraku
	Speedo - mileage reset to zero (Preview) I disconnected my battery recently, and when I refitted it, the odometer mileage reading reset itself to zero - not the trip reading, but the total mileage for the bike. When I took the bike to my Yamaha dealer for it's annual mot test last week, he said there are quite a few batches of Yamaha speedo's...	burton500	0	1018	Mar 5, 2013 by burton500
	Rear brake problem (Preview) My second thread started in a day; something of a record for me! So, I got my TTR out of the garage after not being out for a couple of months, to prep it for its MoT. She started first time and all looked well until I checked the back brake - Nothing. The pedle pressed all the way down but no braking on the back...	fatboy686	7	1184	Mar 4, 2013 by Cubber
	Slippery seat (Preview) My seat is seriously slippery. When I'm two-up it's not long before the pillion has squashed my unmentionables into the tank. Does anyone know if a) There's a remedy product to make it more sticky? Or b) Someone males a cheap grippy seat cover for the TTR? I have an 05 UK model. Thanks all	mpok3	1	844	Feb 27, 2013 by Cubber
	no spark?? (Preview) Hey there peoples thanks for letting me join ya forum its a mad site!! I was just woundering why my ttr isnt getting spark? it has just been rebuilt and was running b4 it was pulled down!! i have replaced the startor motor, battery, and coil ( all brand new) asweel as checked fuses and saftey switches i...	luk3B	1	725	Feb 27, 2013 by TTRfan
	Rattling top end? (Preview) Hi All, My TTR is rattling a lot more than I remember it doing at the end of last year. When riding at a reasonable pace (about 40mph) on a road (tarmac) and neither accelerating (under-load) nor decelerating (coasting) the top end has a distinct quite loud rattle that I don't recall it used to do. It's al...	ajosborne	8	1306	Feb 27, 2013 by ajosborne
	Help Uncorking the TTR250 exhaust muffler help ttr250 1994 1993 (Preview) I did a lot of searching and read a lot about uncorking the TTR250 with a lot of good information. The problem that I am running into are the specifics. I have a 1993-1994 TTR250 that I just got professionally painted black. It looks incredible! I'll post some pictures when I can. As I looked for all of th...	Medic5916	7	7136	Feb 27, 2013 by davecambo
	03 ttr 250 carburetor problems (Preview) I'm fixing up my friend's 03 ttr 250 that has been stored outside for the last 3 years. The bike had previously ran good before being neglected, so he handed the bike over for a quick tune up and carb clean. When I disassembled the bike, I noticed a lot of dirt in the air boot along with some in the carb. ...	efiles123	5	2693	Feb 26, 2013 by TDVT
	Active link for TTR 250 Workshop manual (Preview) Hi all, I was just wondering if there is still an active link for the workshop manual? Thanks, Charlie	majorendo	4	1467	Feb 25, 2013 by majorendo
	TTR knocking! (Preview) My bike is knocking sound when you ride only and I've replaced the out put shaft bearing can any1 help?	zak stoker	2	575	Feb 20, 2013 by Cubber
	White stickies (Preview) A quick and hopefully simple quetsion; I have seen plenty of choice of graphics sets availabile for the tank, mudgaurds etc. But I would like plain white stickers for above the headlight and side panels (i.e the number boards if it were a MX bike). What do you use for these? Thx, Nigel.	fatboy686	7	878	Feb 20, 2013 by TTRfan
	1998 TTR250 OE (Preview) Just bought this bike and would lie to know is there a service manual available? I may be being dense but can only seem to find later variants and the Haynes manual that coverts the Blue bikes. Sorry if I am being dense. Many thanks Stuart	Thor1340	1	341	Feb 19, 2013 by TT-R250M
«First < 1 … 49 50 51 52 53 … 63 > Last» \| Page of 63 sorted by