A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Top end rattle / bearing.


Guru

Status: Offline
Posts: 599
Date:
Top end rattle / bearing.
Permalink  
 


Ive got this noise coming from the right hand side of the head. 40,000km with first(  8000km no history ) .....  its only there when motors warming up and it gets abit of load on it as i go thought gears. ::: in saying that its not there as bike warms on idling....i can rev it with no noise.  I do let it idle for 5mins first , if i dont give it a big 10/15 warm up in 1--2gears keeping the revs down riding slow.  The rattle or bearing sound appears say at 3000 rpm going through the gears. I reduce the revs then its gone. After the motor is really hot noise disappears .  Would the head not be flooding enough to allow bearings to have enough oil. Why im thinking its not the cam chain is i give it heaps of revs through the gears , half thrash the best and no noise. Thanks. 



__________________

 Tweed heads Australia. 



Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Noise only appeared at 32,000km and is becoming more frequent.  But not there when motor is real hot. 



__________________

 Tweed heads Australia. 



Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

Have you tried the plastic screwdriver / stethoscope method yet, it works well for pinpointing exactly where a noise is coming from .

 



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 



Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Thanks Steve. Will do that in the next few Hours   , Ive read that Brian says timing chain sound is a woosh type sound and the auto adjusters give little trouble. i did the oil pressure check with that 10mm bolt on top of oil filter, oil comes out ok.   Thnx. 



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

Loose bash plate 

loose. Engine mount 

loose exhaust heat shield

loose fit between header and silencer 

just some of the silly things to rule out 



__________________


Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

 All tight buff, thnx.  Noise is difinetly top end. Did the srcew driver thing and listened. Maybe cam chain rattle but im no expert, anything else in the head that needs oil and maybe gets to it slower.  Noise is not there from cold idle/slight rev. But comes in when i rev it before its really hot.  Had another thrash of the best and no noise when real hot. I mean real hot. Like it needs 15 min of slow ridding till its hot enough for the noise to stay away. Thnx. 



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

A little bit of piston slap perhaps?

If so, nowt to worry about until you start using oil and then a rebore will cure it wink

Camchain noises tend to be constant and not affected by engine heat or speed. Shouldn't need to worry about oil upstairs, the TTR's head swims in oil!

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 1378
Date:
Permalink  
 

Have you checked the state of the cam chain? At that mileage I'd be checking the valve clearances and the state of the chain for sure. If the bearings didn't have enough oil they would have chewed themselves up by now. It's not a terrible job to just whip the top cover off, set the crank at top dead centre, and check valve clearances and the state of the chain. It's then not much more work to take a camshaft cap off and check the surfaces (but be gentle - they're not very sturdy and need seating properly before you tighten them back up (10Nm only).
Bite the bullet and delve in there is my suggestion.
We're here for you with advice and moral support
Ride safe,
Simon.

__________________


Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Had the cam chain replaced now the rattle has gone..

It was an odd One ....

As there was no noise/rattle when the motor was hot... 

Shim adjustment wasnt needed the bilke shop said...

45,000km on the beast...mainly road use...now going strong once again..

Bike shop said the cam chain was replaced without removing the clutch cover..

$280 AU was the cost all up... Thats all ive spent on the TRR apart from maintaince costs..

They really are a bullet proof machine..



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

Markvan wrote:

Had the cam chain replaced now the rattle has gone..

Bike shop said the cam chain was replaced without removing the clutch cover..


Hi Mark. Glad to hear your TTR is sorted!

I am fascinated as to how the bike shop replaced the cam chain so easily. I can only think they cut the new and old chains and fed the new one in as they pulled out the old one and then rejoined the new chain with a rivet link....  Next time you see them, can you ask please?  I hate mysteries.....

Brian

 



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

IMG_2066.JPG



Attachments
__________________

 Tweed heads Australia. 



Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Brian.. yes i will drop into shop next week to ask... 

photo above is the old chain they must have cut...



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

Ah - no need to ask then Mark. They did what I thought.

PS They are braver than me in cutting and re-riveting a timing chain wink 



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

I've done a couple of can chains that way .in the past 

The chains were cut at the shop and a joiner link was supplied . the pins are made to be able to peen the ends of the pins over I've only done it on paddock bikes as I feel better with a complete chain on the good bikes 



__________________


Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Brian.   Now i am worried.  

I didnt think to ask if the chain was being re revited. I wouldnt have requested it being done that way and would have happily paid the extra labour if it was suggested... 

Have you had failed TTR chains re revited? Or any other single cyclinder motors..

I will be chatting with the bike shop next week to ask them also of fail rates... Hope its zero as they may have a super duper re reviter machine... 

And would it be total upper cyclinder and piston distruction if failed at high revs? 

Thanks   

 



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 8557
Date:
Permalink  
 

Whoops - sorry Mark. I shouldn't have raised doubts in your mind. Just not heard of that technique being used on a TTR before.

I guess I was thinking back to my own attempts at using rivet links on the TTR drive chain.

I am sure your guys will have done it many times before and, as you suggest, have a brilliant rivetting machine to d the job.

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ! 
 

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 



Super Guru

Status: Offline
Posts: 1481
Date:
Permalink  
 

Caught up with a couple of mates from the bike shop yesterday the cam chain  use is a standard roll of chain that fits several brands and they have a rivet tool the advantage is it's time saving as well as if all else down stairs is ok there's no need to disturb it the ones I've done have been bush repairs with a couple of hammers all still running ok one is an Xr with ten years on it 

the process is apparently common on road bikes as some have the chain in the middle of the engine  so as Brian suggested theres no need for concern sounds like you have a good bike shop that has Saved you a few dollars 



__________________


Guru

Status: Offline
Posts: 599
Date:
Permalink  
 

Thanks guys.  Hope i can report back in a few years that the machine has 80,000km on it with the riveted chain intact..

46,000km at the moment.   



__________________

 Tweed heads Australia. 



Super Guru

Status: Offline
Posts: 2644
Date:
Permalink  
 

Fingers crossedsmile



__________________

totallyttrs.com

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard