A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Wanted adverts -> rear wheel spacers
Post Info TOPIC: rear wheel spacers
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
rear wheel spacers
Permalink  
 

i am looking for 2 rear wheel spacers for my oe i have fitted rear w brgs and found out small play in spacers into brgs would like new but on a budget need to get it on road for mot many thanks john 07961904435



__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

Hi John

I am probably not going to explain this very well but will try!

The main function of the spacers is to allow the axle to be torqued up such that they are solid against the inner race of the wheel bearings and the internal spacer such that the wheel bearings turn on the inner races which are held tight and solid.

If the spacers are a bit loose when you place them in the wheel bearings that shouldn't be a problem as they will be centred up when you torque up the axle. Same applies to front and rear.

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
Permalink  
 

brian thank you i will try them in the bike & tighten up see if i get any play

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

If they are torqued up properly then if there is any play it would be in the bearings themselves.



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
Permalink  
 

brian i dont know the answer is getting old or just stupid sat down thought what you said put wheel back in then noticed the nut was to the bottom of the thread and was not nipping it all together put another washer on bingo all is well please do not leave this forum mot hopefully saturday cheers once again john

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

Delighted to be of assistance John biggrinbiggrin

Good luck with the MOT!



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
ttr steve


Super Guru

Status: Offline
Posts: 2649
Date:
Permalink  
 

Result! Sometimes we miss the obvious no



__________________

totallyttrs.com

 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
Permalink  
 

took for mot today passed no advisories put ignition on after mot nothing no lights etc after few seconds came on must be loose connection somewhere not done it since

__________________
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

Good news John - always a relief to get the ticket biggrin

The ignition problem is catching it seems - see http://ttr250.activeboard.com/t62367479/engine-cut-out-problem/

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
Permalink  
 

hi brian i will check those

__________________
JOHNYBOY


Super Guru

Status: Offline
Posts: 1067
Date:
Permalink  
 

just gone to tax it dont seem if i have got log boon from dvla i might hve to ring them tomorrow hope they dont want £25.00 that sets me back further

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Wanted adverts -> rear wheel spacers


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard