A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> UK 04 Sticking clock mend,,,,hopefully.
Post Info TOPIC: UK 04 Sticking clock mend,,,,hopefully.
The Mancunian


Senior Member

Status: Offline
Posts: 191
Date:
UK 04 Sticking clock mend,,,,hopefully.
Permalink  
 

The pics should be self explanatory. What I think has happened is through either lack use of or just wear, the dials have seized. When I got it apart I put a drill on the drive and I could see it all spinning but just clicking where you can see the tip of the crewy. I poked a small screwdriver in-between each one and blasted away with wd40, lined them all back up and they seem to be turning easily now. Whether it's a permanent fix I don't know yet. I went steady with a fine dremmel wheel, cut gradually and you will get to see the white inner wall. Stop at that depth. Go all the way around, and prize away with a big screwy or a blunt chisel. I just eased the water proof shroud out of the reset wheel and once the screws are out of the back you can get your digits in.

This is the bugger

They do have a slot here but it does nowt. Someones had a go previously

Cut steadily all the way round

Prize this out, it's smegged in

Undo these

This is where it seems to be failing

I spun each dial as best I could with my finger then pushed a small screwy in-between them all and blasted with wd40. I set the trip to 0000 and put the miles back where they were. They are staying lined up and seem to be turning freely now, especially the trip which is all I'm bothered about really and would be happy if just that worked. The speedo works fine. I'm only going to duck tape the housing back together for now until I know it's sorted. 

 

 



Attachments
__________________

A gut full of ale and a head full of magic.
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

Excellent "how to" Steve! Let us know how it goes and, if all is well, how you decide to fit the top back on more permanently. I will then make this thread a "sticky" biggrin

Brian



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
BM Steve


Guru

Status: Offline
Posts: 691
Date:
Permalink  
 

You can normally weld that plastic back together if you can find a similar plastic to use as a filler rod

There used to be a company here in OZ that repacked battery packs for power tools



__________________

2004 TTR250 - Highway Dirtbike Hand Guards, 38mm Bar Risers, D606 Front & Rear, Opened up Airbox with Twin Air Filter, Re-jetted Carby, B+B Bash Plate & Frame Guards, DIY 3mm Alloy Tail Tidy, 14/47 Gearing.

 
The Mancunian


Senior Member

Status: Offline
Posts: 191
Date:
Permalink  
 

Good news and not so good news. The odo ain't playing but the trip is. I'm happy with that until something suitable comes along.

__________________

A gut full of ale and a head full of magic.
peteBLUEttr


Super Guru

Status: Offline
Posts: 1721
Date:
Permalink  
 

Can you get at the odometer dials?!

__________________

Pete. South Somerset, England.
The Mancunian


Senior Member

Status: Offline
Posts: 191
Date:
Permalink  
 

Not without the chance of buggerring the whole thing up. The trip reset is held on by a circlip or similar and you need to get that off and withdraw it to get the lot out. Bit of a risk until until I get a replacement. All you can really do if spin the dials with fingers or bullnose pliers.



__________________

A gut full of ale and a head full of magic.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Repairs and maintenance -> UK 04 Sticking clock mend,,,,hopefully.


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard