A forum for owners of Yamaha TTR250 trail and enduro bikes!

Members Login
Username 
 
Password 
    Remember Me  
The TTR250 FAQ web pages -> TTR250 -> Wanted adverts -> Lighting
Post Info TOPIC: Lighting
Chris W


Member

Status: Offline
Posts: 16
Date:
Lighting
Permalink  
 

I have a 2004 that did not come with the lighting I would need to ride it on the roads here in the USA does any one know if and were I can get it or would it be best to get a baja kit for it Thanks Chris

__________________
rattlyolddt


Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Ebay would be a good bet. I just bought a caliper from the USA on ebay.


__________________
Chris W


Member

Status: Offline
Posts: 16
Date:
Permalink  
 

I will be needing blinkers switches and all the parts to make it all run and I am not sure if the bike is wired for it all or if that will have to be added

__________________
Aidan


Senior Member

Status: Offline
Posts: 117
Date:
Permalink  
 

U can buy complete kits on eBay or from your local shop( maybe more expensive) but I'm sure if u had a chat to them they could put a package together for u.

__________________
A dried up puddle is a missed opitunity ;) Melbourne Australia
TTRfan


Super Guru

Status: Offline
Posts: 8565
Date:
Permalink  
 

This is what it says in the FAQ at http://www.ttr250.com

I have a recollection odf someone posting up pics of the whole process but can't recall where - sorry!

My guess is that the wiring loom will accomodate the flasher unit etc.

Brian

 

TTR250 - Street Legal in California? (Courtesy of Tommy Vee)
I recently legalized my TTR in California. Baja designs would be glad to sell you a complete kit to convert your bike but I just ordered the parts that I needed since the head and tail lights are dual filament bulbs (high beam and brake lights) and the bike already has an adequate battery and charging system. You can purchase the turn signals from a local bike shop such as Cycle Gear. Baja Designs supplied the turn signal/ headlight switch (p/n 12-9005), the turn signal flasher, and the horn. I made up my own wiring harnesses but if you are not able to set up your own, I'm sure that Baja designs would be able to supply the wiring kit also. Be sure to ask Baja for the turn signal wiring diagram for their switch. For the brake lights, I bought a hydraulic brake light switch from the local bike shop. The switch replaces the Banjo bolt on the rear hydraulic master cylinder. Once you have all of the lights brakes and turn signals and horn set up, check around with the local repair shops as the bike shops will do the brake and light inspection not the CHP. Call your local CHP office and get a copy of form CHP 888 as the DMV will ask you if you have read the form and you must certify that your bike complies with the requirements. Buy some insurance and rip that green sticker off so you can turn it in at DMV. Call the brake and light station and find out what they will check for. Remember to install a high beam indicator light. I bought a 12-volt mini lamp (blue) from Radio Shack and tie wrapped it to the front brake line guide ring next to the trip meter. Baja was very helpful you can get their 800 number from their website and call their technical services dept. If you are pretty good with wiring it should be a piece of cake. Good luck. TV



__________________

Exeter, Devon, UK

http://www.ttr250.com  - The one and only dedicated TTR250 FAQ!  

TIP: For easy viewing bookmark the "Recent Posts" view - http://ttr250.activeboard.com/p/recent/ 
Chris W


Member

Status: Offline
Posts: 16
Date:
Permalink  
 

Thanks I will check on it

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
The TTR250 FAQ web pages -> TTR250 -> Wanted adverts -> Lighting


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard